In this dissertation we begin with a brief introduction to quantum optics concentrating on the topics of the noise of quantum optical states, quantum estimation theory, quantum interferometry and the atom-field interaction. This background is necessary for understanding the discussions in later chapters. In particular, quantum interferometry, which is optical interferometry when the light source is a quantum mechanical state, plays a central role in this dissertation. In Chapter 2 we discuss the phase estimation sensitivity of quantum metrology when photon loss is present. In Chapter 3 we extend the discussion to include the phase fluctuation of the system caused by the environment. We model our metrological system with the Mach-Zehnder interferometer (MZI) and use a light field in the symmetric number-path entangled state as the source. In both chapters we use the parity operator as the detection scheme and show that it is optimal under pure dephasing. In Chapter 4 we discuss the application of quantum optical states in remote sensing and propose a new scheme for a quantum radar. Again, our scheme consists of a MZI and a coherent light source. It is shown that using only coherent states of light and quantum homodyne detection, super-resolving ranging and angle determination are achievable. Chapter 5 is devoted to the generation of a super-resolving single-photon number-path entangled state which may serve as a proof-of-principle prototype for quantum lithography. The repeated implementation of MZIs is shown to be able to remove photons coherently from both modes of a symmetric number-path entangled state with arbitrarily high photon number. Lastly, in Chapter 6 we introduce the phenomenon known as polarization self-rotation and discuss its potential in generating a squeezed vacuum state, which has a huge impact in quantum interferometry.
In this dissertation we begin with a brief introduction to quantum optics concentrating on the topics of the noise of quantum optical states, quantum estimation theory, quantum interferometry and the atom-field interaction. This background is necessary for understanding the discussions in later chapters. In particular, quantum interferometry, which is optical interferometry when the light source is a quantum mechanical state, plays a central role in this dissertation. In Chapter 2 we discuss the phase estimation sensitivity of quantum metrology when photon loss is present. In Chapter 3 we extend the discussion to include the phase fluctuation of the system caused by the environment. We model our metrological system with the Mach-Zehnder interferometer (MZI) and use a light field in the symmetric number-path entangled state as the source. In both chapters we use the parity operator as the detection scheme and show that it is optimal under pure dephasing. In Chapter 4 we discuss the application of quantum optical states in remote sensing and propose a new scheme for a quantum radar. Again, our scheme consists of a MZI and a coherent light source. It is shown that using only coherent states of light and quantum homodyne detection, super-resolving ranging and angle determination are achievable. Chapter 5 is devoted to the generation of a super-resolving single-photon number-path entangled state which may serve as a proof-of-principle prototype for quantum lithography. The repeated implementation of MZIs is shown to be able to remove photons coherently from both modes of a symmetric number-path entangled state with arbitrarily high photon number. Lastly, in Chapter 6 we introduce the phenomenon known as polarization self-rotation and discuss its potential in generating a squeezed vacuum state, which has a huge impact in quantum interferometry.
Phase estimation has a wide range of applications. Over the years, several strategies have been studied to improve precision in phase estimation. These strategies include using exotic quantum states to quantum detection schemes. This dissertation summarizes my effort in improving the precision of phase estimation with a linear and nonlinear interferometer. Chapter 1 introduces quantum optics and quantum metrology. I introduce all relevant quantum states of light used. We also look into tools and terminologies of quantum metrology such as Fisher information, shot-noise limit, Heisenberg limit, etc., along with examples of phase estimation with a Mach-Zehnder interferometer. In Chapter 2, I discuss multiple phase estimation using a multimode interferometer. Building upon previous work, our scheme consists of a multimode interferometer with single-photon inputs. By using a quantum Fisher information analysis, we show that our scheme gives a constant improvement over other schemes. We also show that our scheme with photon-number-resolving detection approaches the quantum Cram\'er-Rao bound. Moreover, we also consider the probabilistic nature of photon emission at the input, and we study its effect on phase sensitivity. I discuss phase estimation with SU(1,1) interferometer in Chapter 3. We look at phase sensitivity in this interferometer with different input states. Namely, we consider two different phase estimation scheme, one using thermal and squeezed states, and others using coherent and displaced squeezed states with parity and on-off as a detection scheme. We also look into the effect of photon loss inside the interferometer. In Chapter 4, we revisit phase estimation in SU(1,1) interferometer from the perspective of quantum Fisher information. I discuss in detail a longstanding confusion regarding the use of quantum Fisher information in SU(1,1) interferometer. We show that phase averaging or quantum Fisher information matrix method is needed in general for calculating the phase sensitivity which resolves inconsistencies reported in previously published articles.
In 2009, physicists at the National Institute of Standards and Technology in Colorado, Boulder developed what could arguable be called the first rudimentary quantum computer [1]. The past decade has seen unprecedented improvements in quantum information science culminating in the demonstration of quantum supremacy --- that quantum computers can solve problems that are impractical to be solved on the best supercomputers [2]. This remarkable progress necessitates the development of techniques to characterize the quantum devices that are being developed. In my thesis, I will focus on such devices that manipulate and detect light. In Chapter 1, I will introduce the reader to the historical underpinnings of the study of light. After surveying the history of light since time immemorial, I will delve into the developments in the study of light in the 19th and the early 20th century. I will then present a brief introduction to quantum mechanics. I end this chapter by demonstrating how light is quantized. In Chapter 2, I will introduce the various tools necessary to delve into this dissertation. After defining quadrature operators and Wigner functions, I will introduce various states of light used in this thesis. I will then discuss how the evolution, as well as detection of quantum optical states, are modelled. I will then present the formalism of Gaussian quantum information that simplifies the manipulation of certain states of light. Finally, I will briefly talk about quantum metrology and show its advantage in phase estimation. In Chapter 3, I will introduce a method to characterize linear and quadratically nonlinear optical systems. After motivating the need for this work, I will introduce the modifications necessary to the standard Mach-Zehnder interferometer in order to characterize optical systems with it. I will then show how to characterize linear optical systems with coherent probes. I will also show that this scheme is shot-noise limited. I will then show that by using single photons in addition, we can characterize quadratically nonlinear optical systems. Finally, I will show that no advantage is gained in sensitivity by using squeezed light along with coherent light as probes. In Chapter 4, I will introduce a method to characterize photodetectors. This is done by developing an experimental method to find the Wigner functions of the POVM set corresponding to a photodetector. After motivating the necessity of this work as well as describing the proposed experimental setup, I will show how this scheme can
The technologies utilizing quantum states of light have been in the spotlight for the last two decades. In this regard, quantum metrology, quantum imaging, quantum-optical communication are some of the important applications that exploit fascinating quantum properties like quantum superposition, quantum correlations, and nonclassical photon statistics. However, the state-of-art technologies operating at the single-photon level are not robust enough to truly realize a reliable quantum-photonic technology. In Chapter 1, I present a historical account of photon-based technologies. Furthermore, I discuss recent efforts and encouraging developments in the field of quantum-photonic technologies, and major challenges for the experimental realization of reliable quantum technologies utilizing photons, setting up a stage for unveiling our smart methodologies to cope with them. Similarly, in Chapter 2, I review the fundamental concepts such as states of light, spatial modes of light, and machine learning. In Chapter 3 of this dissertation, I present a theoretical work on a nonlinear quantum metrology scheme, showing a sub-shot-noise limited phase estimation using the displaced-squeezed light and on/off detection. Furthermore, I discuss a camera-based squeezed-light detection technique that can be a smart and time-efficient alternative to conventional balanced-homodyne detection. In Chapter 4, I discuss our efforts to incorporate artificial intelligence in a quest to improve the efficiency of discriminating thermal light sources from coherent light sources. The conventional identification technique requires a large number of measurements. We utilize artificial neural networks to dramatically reduce the number of measurements required to distinguish thermal light and coherent light. In Chapter 5, I present a communication protocol that utilizes the spatial modes of light. Despite being valuable resources for a wide variety of quantum technologies, spatial modes of light are extremely vulnerable to random phase fluctuations. The conventional techniques to cope with these challenges are relatively inefficient. We utilize convolutional neural networks to perform the spatial mode correction of single photons, resulting in a near-unity fidelity of correction. I wrap up my dissertation in Chapter 6 by summarizing the historical context of quantum technologies, challenging problems facing state-of-art quantum technologies, and the importance of our efforts to introduce artificial intelligence in photonic technologies.
Quantum optical sensing is a technique that utilizes quantum mechanics to enhance, sensitivity and precision to a level considered unparalleled so far. This chapter attempts to introduce the reader to the basics of this fast-growing field along with various technologies and applications. It begins with an explanation of quantum mechanics, superposition, entanglement, and quantum coherence that allow sensors to go beyond classical performance. One of the central technologies is quantum entanglement – the phenomenon whereby several particles become instantaneous spouses and are measured with utmost precision, for instance, distance, time, and magnetic fields. Entanglement Interferometry is entanglement applied in the detection of gravitational waves and high-resolution imaging. Squeezed light, the other area of interest, is a method that removes some of the fluctuations in one parameter of light, to increase the interferometer sensor, to measure small movements and low-frequency gravitational waves. Single photon emitting devices and detectors enable high-sensitivity measurements in applications such as bioimaging and quantum-securing communication. The chapter also illustrates the usage of this technology in practice in healthcare, environment, and navigation, like the examination of biomarkers and pollutants. Last is the discussion of issues such as quantum coherence and issues of scalability and development of QTs, as well as the proposed further development and more potential advances for QTs as a medium for mass use.
This dissertation serves as a general introduction to Wigner functions, phase space, and quantum metrology but also strives to be useful as a how-to guide for those who wish to delve into the realm of using continuous variables, to describe quantum states of light and optical interferometry. We include many of the introductory elements one needs to appreciate the advantages of this treatment as well as show many examples in an effort to make this dissertation more friendly. In the initial segment of this dissertation, we focus on the advantages of Wigner functions and their use to describe many quantum states of light. We focus on coherent states and squeezed vacuum with a Mach Zehnder Interferometer for many of our examples, also used by experiments such as advanced LIGO. Later, we will also analyze this setup in more detail with a full example including the effects of many noise sources such as phase drift, photon loss, inefficient detectors, and thermal noise. In this setup, we also show the optimal measurement scheme, which is currently not employed in experiment. Throughout our metrology discussions, we will also discuss various quantum limits and use quantum Fisher information to show optimal bounds. When applicable, we also discuss the use of quantum Gaussian information and how it relates to our Wigner function treatment. The remainder of our discussion focuses on investigating the effects of photon addition and subtraction to various states of light and analyze the nondeterministic nature of this process. We use examples of m photon additions to a coherent state as well as discuss the properties of an m photon subtracted thermal state. We also provide an argument that this process must always be a nondeterministic one, or the ability to violate quantum limits becomes apparent. We show that using phase measurement as one's metric is much more restrictive, which limits the usefulness of photon addition and subtraction. When we consider SNR however, we show improved SNR statistics, at the cost of increased measurement time. In this case of SNR, we also quantify the efficiency of the photon addition and subtraction process.
The insights offered by quantum mechanics to the field of optical metrology are many-fold, with non-classical states of light themselves used to make sensors that surpass the sensitivity of sensors using classical states of light. Unfortunately, this advantage, referred to often as "super-sensitivity" is notoriously fragile, and even the slightest experimental imperfections may greatly reduce the efficacy of the non-classical sensors, sometimes completely obviating their advantage. In my thesis I have shown that the performance of an otherwise ideal two-photon interferometer, which exploits entanglement between photons to make super-sensitive measurements of phase, is crippled by the slightest introduction of decoherence between modes of the interferometer. I have shown further that such drastic reduction in sensitivity can also appear in classical measurement problems, specifically that the recently developed methods of estimating the separation between a pair of point sources are rendered less effective when the ideal assumption of complete spatial incoherence is relaxed. Towards overcoming these and other issues, I have designed new configurations that use ancillary optical degrees of freedom, a tool-set that has recently garnered much interest in the field of quantum optics. In the context of two-photon interferometry, I have shown that by coupling polarization to the spatial-structure of the two photon state used to probe phase it is possible to obviate the need for a reference phase, even in the context of decoherence and imperfections in the interferometer. In the context of two-point resolution, I have developed an anisotropic imaging system that performs the function of an image-inversion interferometer and is inherently stable, offering an attractive implementation of recently developed methods of sub-Rayleigh imaging. I have further shown both theoretically and experimentally that the same anisotropic image-inversion interferometer is useful in measuring spatially encoded phases, both in the context of classical illumination as well as quantum-aided two-photon super-sensing. In both cases, the ability to perform interferometric measurements of the spatial structure of an electric field without splitting beam paths forms a bridge between conception and implementation of precision-sensing measurement strategies. Finally, I have shown that binary interferometric method based on the common-path anisotropic imaging system that I introduced, are able to measure both phase gradients and transverse beam tilts with a sensitivity beating conventional systems that are used both commercially and in research laboratories.