Reading out a qubit often requires coupling it to a resonator, but that same resonator can also give the qubit an extra path to decay. Here, we study a way to reduce this loss using a built-in permanent electric dipole. The dipole shifts the cavity field in different directions for the qubit ground and excited states. This shift makes the relevant wave functions overlap less, which weakens the transverse qubit--cavity exchange that causes Purcell decay. In a simplified displaced rotating-wave model, this exchange vanishes at η=2. In the full transverse model, this exact zero is lifted, but strong suppression remains at a larger dipole-induced displacement. Using dressed open-system decay rates, we find an operating point where the cavity-mediated decay is strongly reduced while the longitudinal readout signal remains finite. For the benchmark studied here, at fixed pointer separation, the normalized lifetime increases from κT1=11.1 to 47.3, and the estimated single-shot readout error drops from 0.21 to 0.07. These results show that permanent electric dipoles can provide an internal, channel-selective form of Purcell protection.
Dispersive readout of superconducting qubits relies on a transverse capacitive coupling that hybridizes the qubit with the readout resonator, subjecting the qubit to Purcell decay and measurement-induced state transitions (MIST). Despite the widespread use of Purcell filters to suppress qubit decay and near-quantum-limited amplifiers, dispersive readout often lags behind single- and two-qubit gates in both speed and fidelity. Here, we experimentally demonstrate junction readout, a simple readout architecture that realizes a strong qubit-resonator cross-Kerr interaction without relying on a transverse coupling. This interaction is achieved by coupling a transmon qubit to its readout resonator through both a capacitance and a Josephson junction. By varying the qubit frequency, we show that this hybrid coupling provides intrinsic Purcell protection and enhanced resilience to MIST, enabling readout at high photon numbers. While junction readout is compatible with conventional linear measurement, in this work we exploit the nonlinear coupling to intentionally engineer a large Kerr nonlinearity in the resonator, enabling bifurcation-based readout. Using this approach, we achieve a 99.4 % assignment fidelity with a 68 ns integration time and a 98.4 % QND fidelity without an external Purcell filter or a near-quantum-limited amplifier. These results establish the junction readout architecture with bifurcation-based readout as a scalable and practical alternative to dispersive readout, enabling fast, high-fidelity qubit measurement with reduced hardware overhead.