A well-parallelized local singles and doubles coupled-cluster (LCCSD) method using pair natural virtual orbitals (PNOs) is presented. The PNOs are constructed using large domains of projected atomic orbitals (PAOs) and orbital specific virtual orbitals (OSVs). We introduce a hierarchy of close, weak, and distant pairs, based on pair energies evaluated by local Møller–Plesset perturbation theory (LMP2). In contrast to most previous implementations of LCCSD methods, the close and weak pairs are not approximated by LMP2 but treated by higher-order methods. This leads to greatly improved accuracy for large systems, in particular when long-range dispersion interactions are important. Close pair amplitudes are optimized using approximate LCCSD equations, in which slowly decaying terms that mutually cancel at long-range are neglected. For weak pairs, the same approximations are used, but in addition, the nonlinear terms are neglected (coupled electron pair approximation). Distant pairs are treated by spin-component scaled (SCS)-LMP2 using multipole approximations. For efficiency reasons, various projection approximations are also introduced. The impact of these approximations on absolute and relative energies depends on the PNO domain sizes. The errors are found to be negligible, provided that sufficiently large PNO domains are used for close and weak pairs. For the selection of these domains the usual natural orbital occupation number criterion is found to be insufficient, and an additional energy criterion is used. For extended one-dimensional systems, the computational effort of the method scales nearly linearly with the number of correlated electrons, but the linear scaling regime is usually not reached in real-life applications for three-dimensional systems. Nevertheless, due to the parallelization that is efficient up to about 100–200 CPU cores (dependent on the molecular size), accurate calculations for three-dimensional molecules with about 100 atoms and augmented triple-ζ basis sets (e.g., cc-pVTZ-F12) can be carried out in 1–3 h of elapsed time (depending on the molecular structure and the number of CPU cores, excluding the time for Hartree–Fock). The convergence of the results with respect to the thresholds and options that control the domain, pair, and projection approximations is extensively tested. Benchmark examples for several difficult and large cases are presented, which demonstrate that the errors of relative energies (e.g., reaction energies, barrier heights) caused by the pair and projection approximations can be reduced to below 1 kJ mol –1 . The remaining errors are mainly caused by the finite PAO domains. The larger these are made, the more intramolecular or intermolecular basis set superposition errors are introduced, and the canonical results are approached only very slowly. This problem is eliminated in the explicitly correlated variant of our method (PNO-LCCSD-F12), which will be described in a separate paper, along with a larger set of benchmark calculations.
A well-parallelized local singles and doubles coupled-cluster (LCCSD) method using pair natural virtual orbitals (PNOs) is presented. The PNOs are constructed using large domains of projected atomic orbitals (PAOs) and orbital specific virtual orbitals (OSVs). We introduce a hierarchy of close, weak, and distant pairs, based on pair energies evaluated by local Møller–Plesset perturbation theory (LMP2). In contrast to most previous implementations of LCCSD methods, the close and weak pairs are not approximated by LMP2 but treated by higher-order methods. This leads to greatly improved accuracy for large systems, in particular when long-range dispersion interactions are important. Close pair amplitudes are optimized using approximate LCCSD equations, in which slowly decaying terms that mutually cancel at long-range are neglected. For weak pairs, the same approximations are used, but in addition, the nonlinear terms are neglected (coupled electron pair approximation). Distant pairs are treated by spin-component scaled (SCS)-LMP2 using multipole approximations. For efficiency reasons, various projection approximations are also introduced. The impact of these approximations on absolute and relative energies depends on the PNO domain sizes. The errors are found to be negligible, provided that sufficiently large PNO domains are used for close and weak pairs. For the selection of these domains the usual natural orbital occupation number criterion is found to be insufficient, and an additional energy criterion is used. For extended one-dimensional systems, the computational effort of the method scales nearly linearly with the number of correlated electrons, but the linear scaling regime is usually not reached in real-life applications for three-dimensional systems. Nevertheless, due to the parallelization that is efficient up to about 100–200 CPU cores (dependent on the molecular size), accurate calculations for three-dimensional molecules with about 100 atoms and augmented triple-ζ basis sets (e.g., cc-pVTZ-F12) can be carried out in 1–3 h of elapsed time (depending on the molecular structure and the number of CPU cores, excluding the time for Hartree–Fock). The convergence of the results with respect to the thresholds and options that control the domain, pair, and projection approximations is extensively tested. Benchmark examples for several difficult and large cases are presented, which demonstrate that the errors of relative energies (e.g., reaction energies, barrier heights) caused by the pair and projection approximations can be reduced to below 1 kJ mol –1 . The remaining errors are mainly caused by the finite PAO domains. The larger these are made, the more intramolecular or intermolecular basis set superposition errors are introduced, and the canonical results are approached only very slowly. This problem is eliminated in the explicitly correlated variant of our method (PNO-LCCSD-F12), which will be described in a separate paper, along with a larger set of benchmark calculations.
Accurate correlated electronic structure methods involve a significant amount of computations and can be only employed to small molecular systems. For example, the coupled-cluster singles, doubles, and perturbative triples model (CCSD(T)), which is known as the ``gold standard" of quantum chemistry for its accuracy, usually can treat molecules with 20-30 atoms. To extend the reach of accurate correlated electronic structure methods to larger molecular systems, we work towards two directions: parallel computing and reduced-cost/scaling approaches. Parallel computing can utilize more computational resources to handle systems that demand more substantial computational efforts. Reduced-cost/scaling approaches, which introduce approximations to the existing electronic structure methods, can significantly reduce the amount of computation and storage requirements. In this work, we introduce a new distributed-memory massively parallel implementation of standard and explicitly correlated (F12) coupled-cluster singles and doubles (CCSD) with canonical bigO{N^6} computational complexity ( C. Peng, J. A. Calvin, F. Pavov{s}evi'c, J. Zhang, and E. F. Valeev, textit{J. Phys. Chem. A} 2016, textbf{120}, 10231.), based on the TiledArray tensor framework. Excellent strong scaling is demonstrated on a multi-core shared-memory computer, a commodity distributed-memory computer, and a national-scale supercomputer. We also present a distributed-memory implementation of the density-fitting (DF) based CCSD(T) method. (C. Peng, J. A. Calvin, and E. F. Valeev, textit{in preparation for submission}) An improved parallel DF-CCSD is presented utilizing lazy evaluation for tensors with more than two unoccupied indices, which makes the DF-CCSD storage requirements always smaller than those of the non-iterative triples correction (T). Excellent strong scaling is observed on both shared-memory and distributed-memory computers equipped with conventional Intel Xeon processors and the Intel Xeon Phi (Knights Landing) processors. With the new implementation, the CCSD(T) energies can be evaluated for systems containing 200 electrons and 1000 basis functions in a few days using a small size commodity cluster, with even more massive computations possible on leadership-class computing resources. The inclusion of F12 correction to the CCSD(T) method makes it converge to basis set limit much more rapidly. The large-scale parallel explicitly correlated coupled-cluster program makes the accurate estimation of the coupled-cluster basis set limit for molecules with 20 or more atoms a routine. Thus, it can be used rigorously to test the emerging reduced-scaling coupled-cluster approaches. Moreover, we extend the pair natural orbital (PNO) approach to excited states through the equation-of-motion coupled cluster singles and doubles (EOM-CCSD) method. (C. Peng, M. C. Clement, and E. F. Valeev, textit{submitted}) We simulate the PNO-EOM-CCSD method using an existing massively parallel canonical EOM-CCSD program. We propose the use of state-averaged PNOs, which are generated from the average of the pair density of excited states, to span the PNO space of all the excited states. The doubles amplitudes in the CIS(D) method are used to compute the state-averaged pair density of excited states. The issue of incorrect states in the state-averaged pair density, caused by an energy reordering of excited states between the CIS(D) and EOM-CCSD, is resolved by simply computing more states than desired. We find that with a truncation threshold of 10−7, the truncation error for the excitation energy is already below 0.02 eV for the systems tested, while the average number of PNOs is reduced to 50-70 per pair. The accuracy of the PNO-EOM-CCSD method on local, Rydberg and charge transfer states is also investigated.
We present a formulation of the explicitly correlated second-order Møller-Plesset (MP2-F12) energy in which all nontrivial post-mean-field steps are formulated with linear computational complexity in system size. The two key ideas are the use of pair-natural orbitals for compact representation of wave function amplitudes and the use of domain approximation to impose the block sparsity. This development utilizes the concepts for sparse representation of tensors described in the context of the domain based local pair-natural orbital-MP2 (DLPNO-MP2) method by us recently [Pinski et al., J. Chem. Phys. 143, 034108 (2015)]. Novel developments reported here include the use of domains not only for the projected atomic orbitals, but also for the complementary auxiliary basis set (CABS) used to approximate the three- and four-electron integrals of the F12 theory, and a simplification of the standard B intermediate of the F12 theory that avoids computation of four-index two-electron integrals that involve two CABS indices. For quasi-1-dimensional systems (n-alkanes), the ON DLPNO-MP2-F12 method becomes less expensive than the conventional ON(5) MP2-F12 for n between 10 and 15, for double- and triple-zeta basis sets; for the largest alkane, C200H402, in def2-TZVP basis, the observed computational complexity is N(∼1.6), largely due to the cubic cost of computing the mean-field operators. The method reproduces the canonical MP2-F12 energy with high precision: 99.9% of the canonical correlation energy is recovered with the default truncation parameters. Although its cost is significantly higher than that of DLPNO-MP2 method, the cost increase is compensated by the great reduction of the basis set error due to explicit correlation.
We present in this contribution the first application of local correlation in the context of multicomponent methods. Multicomponent approaches allow for the targeted simulation of electrons together with other Fermions (most commonly protons) as quantum particles. These methods have become increasingly popular over the last years, particularly for the description of nuclear quantum effects (in strong hydrogen bonds, proton tunneling, and many more). However, most implementations are still based on canonical formulations of wave function theory, which we know for decades to be computationally inefficient for capturing dynamical correlation effects. Local correlation approaches, particularly with the use of pair natural orbitals (PNOs), enable asymptotically linear scaling of computational costs with very little impact on the overall accuracy. In this context, the efficient use of density fitting approximations in the integral calculation proves essential. We start by discussing our implementation of density-fitted NEO-MP2 and NEO-PNO-LMP2, upgrading the electronic correlation treatment up to PNO local coupled cluster level of theory. Several challenging examples are provided to benchmark the method in terms of accuracy as well as computational cost scaling. Following appropriate protocols, anharmonic corrections to localized X-H stretches can be applied routinely with little computational overhead.
We present a new implementation of density matrix renormalization group based tailored coupled clusters method (TCCSD), which employs the domain-based local pair natural orbital approach (DLPNO). Compared to the previous local pair natural orbital (LPNO) version of the method, the new implementation is more accurate, offers more favorable scaling, and provides more consistent behavior across the variety of systems. On top of the singles and doubles, we include the perturbative triples correction (T), which is able to retrieve even more dynamic correlation. The methods were tested on three systems: tetramethyleneethane, oxo-Mn(Salen), and iron(II)-porphyrin model. The first two were revisited to assess the performance with respect to LPNO-TCCSD. For oxo-Mn(Salen), we retrieved between 99.8 and 99.9% of the total canonical correlation energy which is an improvement of 0.2% over the LPNO version in less than 63% of the total LPNO runtime. Similar results were obtained for iron(II)-porphyrin. When the perturbative triples correction was employed, irrespective of the active space size or system, the obtained energy differences between two spin states were within the chemical accuracy of 1 kcal/mol using the default DLPNO settings.
We review the current capabilities of local electron correlation methods up to the coupled cluster model with single, double, and perturbative triple excitations [CCSD(T)], which is a gold standard in quantum chemistry. The main computational aspects of the local method types are assessed from the perspective of applications, but the focus is kept on how to achieve chemical accuracy (i.e., <1 kcal/mol uncertainty), as well as on the broad scope of chemical problems made accessible. The performance of state-of-the-art methods are also compared, including the most employed DLPNO and, in particular, our local natural orbital (LNO) CCSD(T) approach. The high accuracy and efficiency of the LNO method makes chemically accurate CCSD(T) computations accessible for molecules of hundreds of atoms with resources affordable to a broad computational community (days on a single CPU and 10–100 GB of memory). Recent developments in LNO-CCSD(T) enable systematic convergence and robust error estimates even for systems of complicated electronic structure or larger size (up to 1000 atoms). The predictive power of current local CCSD(T) methods, usually at about 1–2 order of magnitude higher cost than hybrid density functional theory (DFT), has become outstanding on the palette of computational chemistry applicable for molecules of practical interest. We also review more than 50 LNO-based and other advanced local-CCSD(T) applications for realistic, large systems across molecular interactions as well as main group, transition metal, bio-, and surface chemistry. The examples show that properly executed local-CCSD(T) can contribute to binding, reaction equilibrium, rate constants, etc. which are able to match measurements within the error estimates. These applications demonstrate that modern, open-access, and broadly affordable local methods, such as LNO-CCSD(T), already enable predictive computations and atomistic insight for complicated, real-life molecular processes in realistic environments.
One of the major obstacles in modern quantum chemistry is the need to employ exceedingly large one-electron basis sets in electron correlation methods to obtain reliably accurate results. The family of explicitly correlated wave function methods circumvents this issue by introducing terms that explicitly depend on the interelectronic distance, thereby enforcing the correct electron–electron cusp behavior, albeit at the cost of additional complicated many-electron integrals when evaluated without further approximation. The main focus of the present work is the efficient, low-scaling evaluation of explicitly correlated approaches, examined here through the explicitly correlated correction to second-order Møller–Plesset perturbation theory (MP2-F12) as a representative example. While these methods are highly effective in reducing the basis set incompleteness error, the cost associated with the corresponding correction often far exceeds that of the underlying correlation method. To overcome these limitations, several techniques and strategies are introduced to significantly reduce computational demand and resolve the main bottlenecks that arise. A particularly straightforward approach is provided by the scaled MP2-F12 ansatz, which introduces a single empirically determined factor that scales the direct-type geminal–geminal terms to closely reproduce the MP2-F12 correction, thereby omitting the most expensive exchange-type contributions. Furthermore, the computation of Fock matrix elements spanning multiple orbital spaces is drastically accelerated by extending techniques originally developed for Hartree–Fock and density functional theory. The direct contributions are evaluated using a modified resolution-of-the-identity Coulomb (RI-J) approach employing the J-engine ansatz for integral construction, while the exchange contributions are treated via three-dimensional numerical quadrature in the form of the seminumerical sn-LinK method. These approaches reduce the computational cost by more than three orders of magnitude compared to the approximation-free evaluation while maintaining high accuracy, with additional speedups achieved by exploiting the massive parallelism of graphics processing units. The central focus of this work is the efficient decomposition of complicated exchange-type multi-electron integrals, where numerical quadrature plays a key role in improving performance. The complementary auxiliary basis set resolution of the identity (CABS-RI) reduces the most expensive exchange-type integral to a three-electron integral, which is then efficiently decomposed via numerical quadrature. In this context, a highly efficient batch-wise, distance-dependent integral screening exploiting the short-range behavior of F12 operators is introduced, significantly improving performance and enabling near-linear-scaling evaluations while retaining high accuracy. These strategies are extended to all exchange-type contributions in F12 theory, leading to an alternative formulation of integrals better suited for efficient factorization. A novel combination of numerical quadrature with density fitting is presented for the efficient computation of products of four-center two-electron integrals, alongside algorithms covering all exchange-type contributions, including advantageous batching strategies. In general, the formal computational cost with system size M is reduced from O(M⁵) to O(M⁴), with further improvements appearing feasible through the use of localized molecular orbitals combined with advanced integral screening techniques.