Superconducting quantum interference devices with graphene junctions.
Michael D. Thompson, Jonathan R. Prance, R. P. Haley, Yu. A. Pashkin, M. Ben Shalom, Vladimir I. Fal’ko, Anthony J. Matthews, Jeremy White, R Viznichenko, Ziad Melhem
We present measurements of DC superconducting quantum interference devices based on Nb/graphene/Nb Josephson junctions. The superconducting proximity effect in graphene can be used to build Josephson junctions whose critical current can be controlled by field-effect gates. These junctions combine the tunability of semiconductor Josephson junctions with the high critical currents and low contact resistances of metal SNS junctions. By using local gates, the SQUID junction critical currents can be modified individually and this allows the sensitivity and symmetry of the SQUID to be controlled in-situ. We compare the critical current of the SQUID with simulations that include a non-sinusoidal current phase relation in the junctions, as expected for ballistic graphene junctions. We also investigate the transfer function of the device in both symmetric and asymmetric configurations and find a highest transfer function of 300 μV/Φ0. Graphene Josephson junctions have the potential to add functionality to existing technologies; for example, to make SQUID magnetometers with tunable sensitivity or superconducting qubits with fast electrical control.
We present measurements of DC superconducting quantum interference devices based on Nb/graphene/Nb Josephson junctions. The superconducting proximity effect in graphene can be used to build Josephson junctions whose critical current can be controlled by field-effect gates. These junctions combine the tunability of semiconductor Josephson junctions with the high critical currents and low contact resistances of metal SNS junctions. By using local gates, the SQUID junction critical currents can be modified individually and this allows the sensitivity and symmetry of the SQUID to be controlled in-situ. We compare the critical current of the SQUID with simulations that include a non-sinusoidal current phase relation in the junctions, as expected for ballistic graphene junctions. We also investigate the transfer function of the device in both symmetric and asymmetric configurations and find a highest transfer function of 300 μV/Φ0. Graphene Josephson junctions have the potential to add functionality to existing technologies; for example, to make SQUID magnetometers with tunable sensitivity or superconducting qubits with fast electrical control.
Lateral superconductor/graphene structures can be used to make Josephson junctions with low contact resistances and gate-tuneable critical currents. These junctions have the potential to provide new functionality for superconducting devices. For most devices, e.g. transmon qubits and SQUID sensors, it is important to quantify the intrinsic noise of the junctions. The voltage noise of low resistance junctions is typically below the noise floor of room temperature amplifiers. By cross-correlating the signals from two parallel amplifiers, we can detect signals down to 100 pV/√Hz, well below the noise floor of each amplifier. Using this technique, we characterise the voltage noise of a NbTi DC SQUID with graphene junctions in a frequency range from Hz to kHz. Combined with measurements of the SQUID's gain, we map its sensitivity across a range of operating conditions and find that the best-case sensitivity of the device is similar to traditional low temperature SQUIDs with oxide tunnel junctions. This project has received funding from the European Union's Horizon 2020 research and innovation programme under Grant agreement No 785219.
In ballistic superconductor–normal metal–superconductor Josephson junctions, such as those made from graphene or high mobility semiconductors, the current-phase relation may not have the common, sinusoidal form but can be skewed to have a peak supercurrent at a phase difference greater than π/2. Here, we use a numerical simulation that includes thermal noise to investigate the sensitivity of a DC superconducting quantum interference device (SQUID) with such junctions. The simulation uses a resistively and capacitively shunted junction model where the current-phase relation of each junction can be defined as an arbitrary function. The modulation, transfer function, noise, and sensitivity of a SQUID are calculated for different types of current-phase relation. For the examples considered here, we find that the flux sensitivity of the SQUID is always degraded by forward skewing of the current-phase relation, even in cases where the transfer function of the SQUID has been improved.
Superconducting quantum interference devices (SQUIDs) that incorporate two superconductor/insulator/superconductor (SIS) Josephson junctions in a closed loop form the core of some of the most sensitive detectors of magnetic and electric fields currently available. SQUIDs in these applications are typically operated with a finite voltage which generates microwave radiation through the ac Josephson effect. This radiation may impact the system being measured. We describe here a SQUID in which the Josephson junctions are formed from strips of normal metal (N) in good electrical contact with the superconductor (S). Such SNS SQUIDs can be operated under a finite voltage bias with performance comparable or potentially better than conventional SIS SQUIDs. However, they also permit a mode of operation that is based on the unusual interplay of quasiparticle currents and supercurrents in the normal metal of the Josephson junction. The method allows measurements of the flux dependence of the critical current of the SNS SQUID without applying a finite voltage bias across the SNS junction, enabling sensitive flux detection without generating microwave radiation.
Josephson junctions (JJ) are a fundamental component of microwave quantum circuits, such as tunable cavities, qubits, and parametric amplifiers. Recently developed encapsulated graphene JJs, with supercurrents extending over micron distance scales, have exciting potential applications as a new building block for quantum circuits. Despite this, the microwave performance of this technology has not been explored. Here, we demonstrate a microwave circuit based on a ballistic graphene JJ embedded in a superconducting cavity. We directly observe a gate-tunable Josephson inductance through the resonance frequency of the device and, using a detailed RF model, we extract this inductance quantitatively. We also observe the microwave losses of the device, and translate this into sub-gap resistances of the junction at μeV energy scales, not accessible in DC measurements. The microwave performance we observe here suggests that graphene Josephson junctions are a feasible platform for implementing coherent quantum circuits.
In a Josephson junction, the current phase relation relates the phase variation of the superconducting order parameter φ, between the two superconducting leads connected through a weak link, to the dissipationless current. This relation is the fingerprint of the junction. It is usually dominated by a sin(φ) harmonic, however, its precise knowledge is necessary to design superconducting quantum circuits with tailored properties. Here, we directly measure the current phase relation of a superconducting quantum interference device made with gate-tunable graphene Josephson junctions and we show that it can behave as a sin(2φ) Josephson element, free of the traditionally dominant sin(φ) harmonic. Such element will be instrumental for the development of superconducting quantum bits protected from decoherence.
With a large portfolio of elemental quantum components, superconducting quantum circuits have contributed to dramatic advances in microwave quantum optics. Of these elements, quantum-limited parametric amplifiers have proven to be essential for low noise readout of quantum systems whose energy range is intrinsically low (tens of µeV). They are also used to generate non classical states of light that can be a resource for quantum enhanced detection. Superconducting parametric amplifiers, like quantum bits, typically utilize a Josephson junction as a source of magnetically tunable and dissipation-free nonlinearity. The magnetic control is not an industry standard for devices and starts already to be an issue in large scale circuits. In recent years, efforts have been made to introduce semiconductor weak links as electrically tunable nonlinear elements, with demonstrations of microwave resonators and quantum bits using semiconductor nanowires, a two dimensional electron gas, carbon nanotubes and graphene. However, given the challenge of balancing nonlinearity, dissipation, participation, and energy scale, parametric amplifiers have not yet been implemented with a semiconductor weak link. The work presented in this PhD thesis demonstrates the design, fabrication and performances of a parametric amplifier leveraging a graphene Josephson junction.The graphene is encapsulated in between hBN flakes in order to improve its quality. Using such high quality junctions, we demonstrate amplification with 20 dB gain which is the milestone for overcoming noise of the classical amplifiers in the rest of the amplification chain. The Josephson parametric amplifier being based on a resonant structure (around 6 GHz) suffers from the gain bandwidth product limiting the amplification to a few MegaHertz frequency range. The use of a side gate to electrically tune the graphene gives control of the Josephson junction inductance and thus the resonant frequency of the amplifier. We demonstrate a near 1 GHz tunability of the amplification frequency with the use of a side gate which is as good as the tunability offered by using a magnetic flux on a SQUID for similar amplifier designs. Moreover, graphene has shown to exhibit nonlinear loss under a strong microwave irradiation arising because of dynamics in the Andreev states. Dissipation is known to add intrinsic noise on quantum amplifiers and could be a problem for quantum limited parametric amplification. We demonstrate that despite the presence of nonlinear loss, graphene based Josephson parametric amplifiers can reach near quantum limited amplification. A two photon loss model was used to describe the behaviour of the device but we show that a more complex model is required in order to take into account the nonlinear dissipation and the non-sinusoidal current phase relation. We also studied the dynamic range and showed that the graphene based Josephson parametric amplifier can reach a 1 dB compression point of -123 dBm which is as good as single tunnel junctions based parametric amplifiers. Our results expand the toolset for electrically tunable superconducting quantum circuits and offer new opportunities for the development of quantum technologies such as quantum computing, quantum sensing and fundamental science.