Quantum illumination is one of the most basic ways to realize the quantum radar for detection of low-reflectivity targets embedded in a thermal-noise bath. It preserves a strong advantage over the classical counterparts even though its fragile quantum entanglement is completely destroyed by a large amount of noise and losses. In this paper, we describe and analyze a discrete-variable quantum illumination system with ancillary degrees of freedom of entangled photon pairs. Comparing the error probability bound, i.e., the quantum Chernoff bound, we identify that this system indeed offers higher accuracy than the single-photon illumination and quantum illumination with single degree of freedom of entangled photon pairs. Furthermore, the utilization of ancillary degrees of freedom exponentially enhances signal-to-noise ratio over quantum illumination without ancillary degrees of freedom. It means that this system reduces the necessary amount of signal photons to accurately determine whether the object is present or absent in the target region, which is absolutely crucial to the stealthiness of the radar system.
Quantum illumination is one of the most basic ways to realize the quantum radar for detection of low-reflectivity targets embedded in a thermal-noise bath. It preserves a strong advantage over the classical counterparts even though its fragile quantum entanglement is completely destroyed by a large amount of noise and losses. In this paper, we describe and analyze a discrete-variable quantum illumination system with ancillary degrees of freedom of entangled photon pairs. Comparing the error probability bound, i.e., the quantum Chernoff bound, we identify that this system indeed offers higher accuracy than the single-photon illumination and quantum illumination with single degree of freedom of entangled photon pairs. Furthermore, the utilization of ancillary degrees of freedom exponentially enhances signal-to-noise ratio over quantum illumination without ancillary degrees of freedom. It means that this system reduces the necessary amount of signal photons to accurately determine whether the object is present or absent in the target region, which is absolutely crucial to the stealthiness of the radar system.
Quantum radar systems leverage entangled photon pairs to detect and identify targets in noisy or cluttered environments with sensitivity beyond classical limits. By transmitting one photon of an entangled pair toward a distant object while retaining its partner locally, the system exploits quantum correlations to improve signal discrimination, reduce noise susceptibility, and enhance detection probability. This paper outlines the physical principles, operational architecture, and performance advantages of entanglement‑based illumination, providing a clear foundation for future quantum‑enhanced sensing technologies.(If you want it shorter, longer, or more formal, tap: shorter paragraph, longer paragraph, more formal)
Detecting object with low reflectivity embedded within a noisy background is a challenging task. Quantum correlations between pairs of quantum states of light, though are highly sensitive to background noise and losses, offer advantages over traditional illumination methods. Instead of using correlated photon pairs which are sensitive, we experimentally demonstrate the advantage of using heralded single-photons entangled in polarization and path degree of freedom for quantum illumination. In the study, the object of different reflectivity is placed along the path of the signal in a variable thermal background before taking the joint measurements and calculating the quantum correlations. We show the significant advantage of using non-interferometric measurements along the multiple paths for single photon to isolate the signal from the background noise and outperform in detecting and ranging the low reflectivity objects even when the signal-to-noise ratio is as low as 0.03. Decrease in visibility of polarization along the signal path also results in similar observations. This will have direct relevance to the development of single-photon based quantum LiDAR and quantum imaging.
Abstract To detect a stealth target, one may directly probe it with a single photon and analyze the reflected signals. The efficiency of such conventional detection scheme can potentially be enhanced by quantum illumination, where entanglement is exploited to break the classical limits. The question is what is the optimal signal state for achieving the detection limit? Here, we address this question in a general discrete model, and derive a complete set of analytic solutions. For one-shot detection, the parameter space can be classified into three distinct regions, in the form of a “phase diagram” for both conventional and quantum illumination. Interestingly, whenever the reflectivity of the target is less than some critical value, all received signals become useless, which is true even if entangled resources are employed. However, there does exist a region where quantum illumination can provide advantages over conventional illumination; there, the optimal signal state is an entangled state with an entanglement spectrum inversely proportional to the spectrum of the environmental noise state and is, surprisingly, independent of the occurrence probability and the reflectivity of the object. The entanglement of the ideal probe state increases with the entropy of the environment; it becomes more entangled as the temperature of the environment increases. Finally, we show that the performance advantage cannot be fully characterized by any measure of quantum correlation, unless the environment is a complete mixed state.
Quantum illumination is a protocol where quantum resources are utilized to detect a low-reflectivity object embedded in a bright thermal noise bath. For example, quantum illumination with a two-mode squeezed state (TMSS) provides a 6 dB advantage in the error-probability exponent over the optimal classical illumination. We here consider quantum illumination with the photon-subtracted two-mode squeezed state (PSTMSS). Our result is twofold. First, we show that a much smaller error probability Perr could be obtained, meaning that much smaller resources will be required in quantum illumination for a fixed Perr. Second, quantum illumination with PSTMSS appreciably outperforms its classic correspondence in both low- and high-noise operating regimes, extending the regimes in which quantum illumination is optimal for target detection.
Abstract Quantum illumination has been proposed as a theoretical route to detecting low-reflectivity targets, such as stealth aircraft, in high-background-noise environments where classical radar performance degrades. The protocol, as originally formulated (Lloyd, 2008; Tan et al., 2008), uses continuous-variable entangled light (two-mode squeezed vacuum) and a specific phase-sensitive joint receiver to achieve a theoretical detection advantage over classical illumination of matched energy, even though the entanglement itself does not survive the round trip through a lossy, noisy channel. This study investigates whether that advantage appears in a simpler, discrete-variable (qubit) toy model, of the kind commonly used for pedagogical intuition, implemented on PKTron and cross-checked on IBM Quantum hardware. A rigorously fair comparison was constructed in which an entangled Bell pair and a classically correlated (separable) mixture of matched initial correlation strength were each subjected to identical loss and background-noise channels, with detection performance assessed via the same joint correlation measurement (Z⊗Z expectation) in both cases. In PKTron simulation, the entangled probe showed a correlation separation between target-present and target-absent hypotheses of 0.0100 at zero background noise, decreasing to 0.0025 at high background noise, while the classically correlated probe showed a substantially larger separation, decreasing from 0.1000 to 0.0500 over the same range — indicating no entanglement advantage, and if anything, a disadvantage, in this discrete model. This qualitative finding was independently corroborated on IBM Quantum's ibm_kingston hardware, using natural qubit T1 relaxation (rather than an artificially injected noise parameter) as the loss channel: entangled correlation degraded to 54.5% of its initial value after 60 microseconds, compared to 77.7% retained by the classically correlated mixture over the same interval. These results indicate that the theoretical quantum illumination advantage does not straightforwardly emerge from a simple discrete-qubit correlation model, consistent with the broader understanding that the effect is specific to continuous-variable Gaussian states and phase-sensitive joint detection, and consistent with quantum illumination's status as a theoretical concept with no demonstrated range or signal-to-noise advantage over classical radar to date.
An optical transmitter irradiates a target region containing a bright thermal-noise bath in which a low-reflectivity object might be embedded. The light received from this region is used to decide whether the object is present or absent. The performance achieved using a coherent-state transmitter is compared with that of a quantum-illumination transmitter, i.e., one that employs the signal beam obtained from spontaneous parametric down-conversion. By making the optimum joint measurement on the light received from the target region together with the retained spontaneous parametric down-conversion idler beam, the quantum-illumination system realizes a 6 dB advantage in the error-probability exponent over the optimum reception coherent-state system. This advantage accrues despite there being no entanglement between the light collected from the target region and the retained idler beam.