Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEICE Technical Report; IEICE Tech. Rep.

Demonstration of a relaxation oscillator based on a superconducting Schmitt trigger inverter

Onomi Takeshi

Published Jul 28, 2015• 0 citations
OpenAlex

Related papers

Superconducting Schmitt trigger inverter and its application

武 小野美

電子情報通信学会技術研究報告. SCE, 超伝導エレクトロニクス•Jul 16, 2014•0 citations

Experimental Demonstration and Performance Estimation of a new Relaxation Oscillator Using a Superconducting Schmitt Trigger Inverter

Takeshi Onomi

An experimental demonstration and performance estimation of a superconducting relaxation oscillator using the Schmitt trigger inverter are reported. The superconducting Schmitt trigger inverter is composed of a threshold gate that uses coupled superconducting quantum interference devices. The oscillator is based on the general concept of using the Schmitt trigger inverter and a delayed feedback loop. The oscillation frequency is characterized by the circuit parameters of the delayed feedback loop and the hysteresis structure of the Schmitt trigger. The circuit parameter dependence of the oscillation frequency is estimated by numerical simulations. In order to confirm the circuit operation, the proposed relaxation oscillator is fabricated by a Nb/AlOx/Nb standard process and tested. The operation of the oscillator is demonstrated successfully.

Physics Procedia•Jan 1, 2016•5 citations

Oscillators utilizing superconducting resonators

Jack L. Stone, WILLIAM H. HARTWIG

•Jan 1, 1967•1 citation

Implementation of a New Relaxation Oscillator Using Superconducting Schmitt Trigger Inverter

Takeshi Onomi

A new relaxation oscillator using a superconducting Schmitt trigger inverter is proposed and tested. The superconducting Schmitt trigger inverter is composed of a threshold gate using coupled superconducting interference devices (SQUIDs). The oscillator is based on the general concept using the Schmitt trigger inverter and a delayed feedback loop. The designed relaxation oscillator is fabricated by a 2.5kA/cm2Nb/AlOx/Nb process and tested. The operation of a fabricated relaxation oscillator is experimentally demonstrated.

IEEE International Superconductive Electronics Conference (ISEC)•Jul 1, 2015•0 citations

Demonstration of Frequency Synchronization of Superconductor Single Flux Quantum Oscillators

Yuki Yamanashi, Nobuyuki Yoshikawa

The Japan Society of Applied Physics•Jul 6, 2021•0 citations

Numerical Demonstration of Relaxation Oscillation in a Resistive Superconducting Quantum Interference Device With Two Nonhysteretic Josephson Junctions

Yoshinao Mizugaki

The author numerically demonstrates that a resistive superconducting quantum interference device (RSQUID) with two nonhysteretic Josephson junctions works as a relaxation oscillator. Sequential switching of the Josephson junctions transfers positive and negative flux quanta in the RSQUID loop one by one. Differently from a conventional two-junction superconducting quantum interference device, the dissipative RSQUID loop does not maintain the quantized flux, and hence, finite flux can be accumulated in the RSQUID loop during sequential switching of the Josephson junctions. When the accumulated flux reaches a critical value, the corresponding loop current prevents subsequent junction switching. That is, the oscillation stops. After the loop current decays, sequential switching of the junctions resumes. In addition to the waveforms of relaxation oscillation, dependence of relaxation oscillation on device parameters is presented.

IEEE Transactions on Applied Superconductivity•Aug 10, 2010•6 citations
An experimental demonstration and performance estimation of a superconducting relaxation oscillator using the Schmitt trigger inverter are reported. The superconducting Schmitt trigger inverter is composed of a threshold gate that uses coupled superconducting quantum interference devices. The oscillator is based on the general concept of using the Schmitt trigger inverter and a delayed feedback loop. The oscillation frequency is characterized by the circuit parameters of the delayed feedback loop and the hysteresis structure of the Schmitt trigger. The circuit parameter dependence of the oscillation frequency is estimated by numerical simulations. In order to confirm the circuit operation, the proposed relaxation oscillator is fabricated by a Nb/AlOx/Nb standard process and tested. The operation of the oscillator is demonstrated successfully.
A new relaxation oscillator using a superconducting Schmitt trigger inverter is proposed and tested. The superconducting Schmitt trigger inverter is composed of a threshold gate using coupled superconducting interference devices (SQUIDs). The oscillator is based on the general concept using the Schmitt trigger inverter and a delayed feedback loop. The designed relaxation oscillator is fabricated by a 2.5kA/cm2Nb/AlOx/Nb process and tested. The operation of a fabricated relaxation oscillator is experimentally demonstrated.
The author numerically demonstrates that a resistive superconducting quantum interference device (RSQUID) with two nonhysteretic Josephson junctions works as a relaxation oscillator. Sequential switching of the Josephson junctions transfers positive and negative flux quanta in the RSQUID loop one by one. Differently from a conventional two-junction superconducting quantum interference device, the dissipative RSQUID loop does not maintain the quantized flux, and hence, finite flux can be accumulated in the RSQUID loop during sequential switching of the Josephson junctions. When the accumulated flux reaches a critical value, the corresponding loop current prevents subsequent junction switching. That is, the oscillation stops. After the loop current decays, sequential switching of the junctions resumes. In addition to the waveforms of relaxation oscillation, dependence of relaxation oscillation on device parameters is presented.