Measuring the state of a qubit is a key fundamental operation of a quantum computer. High-fidelity single-shot readout of superconducting qubits can be achieved using parametric amplifiers at millikelvin temperatures. However, scaling parametric amplifiers beyond hundreds of qubits is challenging due to practical size and power limitations. Nanobolometers can, in contrast, offer scalability, sensitivity and speed suitable for qubit readout. Here we show that a bolometer can provide single-shot qubit readout with a readout duration of 13.9 μs and a single-shot fidelity of 0.618. The fidelity is mainly limited by the energy relaxation time of the qubit (28 μs), and a fidelity of 0.927 is found after removing errors arising from this relaxation. In the future, higher-fidelity single-shot readout may be achieved through improvements in chip design and experimental setup, as well as a change in the bolometer absorber material to reduce the readout time to the level of hundreds of nanoseconds and below.Measuring the state of a qubit is a key fundamental operation of a quantum computer. High-fidelity single-shot readout of superconducting qubits can be achieved using parametric amplifiers at millikelvin temperatures. However, scaling parametric amplifiers beyond hundreds of qubits is challenging due to practical size and power limitations. Nanobolometers can, in contrast, offer scalability, sensitivity and speed suitable for qubit readout. Here we show that a bolometer can provide single-shot qubit readout with a readout duration of 13.9 μs and a single-shot fidelity of 0.618. The fidelity is mainly limited by the energy relaxation time of the qubit (28 μs), and a fidelity of 0.927 is found after removing errors arising from this relaxation. In the future, higher-fidelity single-shot readout may be achieved through improvements in chip design and experimental setup, as well as a change in the bolometer absorber material to reduce the readout time to the level of hundreds of nanoseconds and below.

Nature ElectronicsApr 10, 202430 citations

High Fidelity Measurement of Single and Multi-qubit Superconducting Quantum Circuits

S. Kundu, Sumeru Hazra, Tanay Roy +4 more

Bulletin of the American Physical SocietyMar 5, 20180 citations

Single-Shot Readout of a Superconducting Qubit Using a Thermal Detector

András Gunyhó, Kundu, Suman, Ma, Jian +8 more

Measuring the state of qubits is one of the fundamental operations of a quantum computer. Currently, state-of-the-art high-fidelity single-shot readout of superconducting qubits relies on parametric amplifiers at the millikelvin stage. However, parametric amplifiers are challenging to scale beyond hundreds of qubits owing to practical size and power limitations. Nanobolometers have a multitude of properties that are advantageous for scalability and have recently shown sensitivity and speed promising for qubit readout, but such thermal detectors have not been demonstrated for this purpose. In this work, we utilize an ultrasensitive bolometer in place of a parametric amplifier to experimentally demonstrate single-shot qubit readout. With a readout duration of $13.9~μ\mathrm{s}$ , we achieve a single-shot fidelity of 0.618 which is mainly limited by the energy relaxation time of the qubit, $T_1 = 28~μ\mathrm{s}$ . Without the $T_1$ errors, we find the fidelity to be 0.927. In the future, high-fidelity single-shot readout may be achieved by straightforward improvements to the chip design and experimental setup, and perhaps most interestingly by the change of the bolometer absorber material to reduce the readout time to the hundred-nanosecond level and beyond.Measuring the state of qubits is one of the fundamental operations of a quantum computer. Currently, state-of-the-art high-fidelity single-shot readout of superconducting qubits relies on parametric amplifiers at the millikelvin stage. However, parametric amplifiers are challenging to scale beyond hundreds of qubits owing to practical size and power limitations. Nanobolometers have a multitude of properties that are advantageous for scalability and have recently shown sensitivity and speed promising for qubit readout, but such thermal detectors have not been demonstrated for this purpose. In this work, we utilize an ultrasensitive bolometer in place of a parametric amplifier to experimentally demonstrate single-shot qubit readout. With a readout duration of $13.9~μ\mathrm{s}$, we achieve a single-shot fidelity of 0.618 which is mainly limited by the energy relaxation time of the qubit, $T_1 = 28~μ\mathrm{s}$. Without the $T_1$ errors, we find the fidelity to be 0.927. In the future, high-fidelity single-shot readout may be achieved by straightforward improvements to the chip design and experimental setup, and perhaps most interestingly by the change of the bolometer absorber material to reduce the readout time to the hundred-nanosecond level and beyond.

arXiv:2303.03668Mar 7, 20231 citation

Nonlinearities in the quantum measurement process of superconducting qubits

I. Serban

Jan 1, 20081 citation

Measuring charge and flux noise correlations with a superconducting qubit

Bradley Christensen, Christopher D. Wilen, Alexander Opremcak +7 more

Bulletin of the American Physical SocietyMar 6, 20190 citations

13.9~μ\mathrm{s}

, we achieve a single-shot fidelity of 0.618 which is mainly limited by the energy relaxation time of the qubit,

T_1 = 28~μ\mathrm{s}

. Without the

T_1

errors, we find the fidelity to be 0.927. In the future, high-fidelity single-shot readout may be achieved by straightforward improvements to the chip design and experimental setup, and perhaps most interestingly by the change of the bolometer absorber material to reduce the readout time to the hundred-nanosecond level and beyond.