The standard method of quantum state tomography (QST) relies on the measurement of a set of noncommuting observables, realized in a series of independent experiments. Ancilla-assisted QST (AAQST) proposed by Nieuwenhuizen and co-workers [Phys. Rev. Lett. 92, 120402 (2004)] greatly reduces the number of independent measurements by exploiting an ancilla register in a known initial state. In suitable conditions AAQST allows mapping out density matrix of an input register in a single experiment. Here we describe methods for explicit construction of AAQST experiments in multiqubit registers. We also report nuclear magnetic resonance studies on AAQST of (i) a two-qubit input register using a one-qubit ancilla in an isotropic liquid-state system and (ii) a three-qubit input register using a two-qubit ancilla register in a partially oriented system. The experimental results confirm the effectiveness of AAQST in such multiqubit registers.
The standard method of quantum state tomography (QST) relies on the measurement of a set of noncommuting observables, realized in a series of independent experiments. Ancilla-assisted QST (AAQST) proposed by Nieuwenhuizen and co-workers [Phys. Rev. Lett. 92, 120402 (2004)] greatly reduces the number of independent measurements by exploiting an ancilla register in a known initial state. In suitable conditions AAQST allows mapping out density matrix of an input register in a single experiment. Here we describe methods for explicit construction of AAQST experiments in multiqubit registers. We also report nuclear magnetic resonance studies on AAQST of (i) a two-qubit input register using a one-qubit ancilla in an isotropic liquid-state system and (ii) a three-qubit input register using a two-qubit ancilla register in a partially oriented system. The experimental results confirm the effectiveness of AAQST in such multiqubit registers.
The standard method of Quantum State Tomography (QST) relies on the measurement of a set of noncommuting observables, realized in a series of independent experiments. Ancilla Assisted QST (AAQST) proposed by Nieuwenhuizen and co-workers (Phys. Rev. Lett., 92, 120402 (2004)) greatly reduces the number of independent measurements by exploiting an ancilla register in a known initial state. In suitable conditions AAQST allows mapping out density matrix of an input register in a single experiment. Here we describe methods for explicit construction of AAQST experiments in multi-qubit registers. We also report nuclear magnetic resonance studies on AAQST of (i) a two- qubit input register using a one-qubit ancilla in an isotropic liquid-state system and (ii) a three-qubit input register using a two-qubit ancilla register in a partially oriented system. The experimental results confirm the effectiveness of AAQST in such many-qubit registers.
The standard procedure for quantum process tomography (QPT) requires a series of experiments. Each experiment involves initialization of the system to a particular basis state, applying the quantum process $\ensuremath{\varepsilon}$ on the system, and finally characterizing the output state by quantum state tomography (QST). The output states collected for a complete set of basis states enable us to calculate the $\ensuremath{\chi}$ matrix characterizing the process $\ensuremath{\varepsilon}$. The standard procedure for QST itself requires independent experiments, each involving measurement of a set of commuting observables. Thus QPT procedure demands a number of independent measurements and, moreover, this number increases rapidly with the size of the system. However, in ensemble systems, the total number of independent measurements can be greatly reduced with the availability of ancilla qubits. Ancilla-assisted process tomography (AAPT) has earlier been shown to require a single QST of system-ancilla space. Ancilla-assisted quantum state tomography (AAQST) has also been shown to perform QST in a single-scan measurement of an ensemble system. Here we combine AAPT with AAQST to realize a single-scan QPT (SSPT), a procedure to characterize a general quantum process in a single ensemble measurement. We demonstrate experimental SSPT by characterizing several single-qubit processes using a three-qubit NMR quantum register. Furthermore, using the SSPT procedure, we experimentally characterize the twirling process and compare the results with theory.
The field of quantum information relies on the crucial issue of characterizing quantum states from measurements. This is performed through a process called quantum state tomography (QST). However, QST requires a large number of measurements, each derived from a different physical observable corresponding to a different experimental setup. Changing the setup results in unwanted changes to the data, prolongs the measurement, and impairs assumptions made about noise. Here, we propose to overcome these drawbacks by performing QST with a single observable. A single observable can often be realized by a single setup, thereby considerably reducing the experimental effort. However, the information contained in a single observable is insufficient for full QST. To overcome the lack of sufficient measurements in a single observable, we increase the system dimension by adding an ancilla that couples to the information in the system and exploit the fact that the sought state is often close to a pure state. We demonstrate our approach on multiphoton states by recovering structured quantum states from a single observable in a single experimental setup.
Quantum state tomography (QST) is a crucial tool for characterizing quantum states. However, performing full QST becomes impractical for reconstructing multiqubit density matrices since datasets and computational costs grow exponentially with qubit number. To bypass full QST, we introduce selective and efficient QST (SEEQST)—a method that enables efficient estimation of multiple selected elements of an arbitrary multiqubit density matrix. We show that any N -qubit density matrix can be partitioned into 2 N disjoint subsets, each containing 2 N elements. With SEEQST, any such subset can be accurately estimated from just two experiments with only single-qubit measurements. The complexity for estimating any subset remains constant regardless of Hilbert-space dimension, so, if desired, SEEQST can reconstruct the full density matrix, using 2 N + 1 − 1 experiments, where standard methods would use 3 N experiments. We provide a circuit decomposition for the SEEQST experiments, demonstrating that their maximum circuit depth scales logarithmically with N assuming all-to-all connectivity.
Quantum state tomography (QST) via local measurements on reduced density matrices (LQST) is a promising approach but becomes impractical for large systems. To tackle this challenge, we developed an efficient quantum state tomography method inspired by quantum overlapping tomography [Phys. Rev. Lett. 124, 100401 (2020)PRLTAO0031-900710.1103/PhysRevLett.124.100401], which utilizes parallel measurements (PQST). In contrast to LQST, PQST significantly reduces the number of measurements and offers more robustness against shot noise. Experimentally, we demonstrate the feasibility of PQST in a treelike superconducting qubit chip by designing high-efficiency circuits, preparing W states, ground states of Hamiltonians, and random states, and then reconstructing these density matrices using full quantum state tomography (FQST), LQST, and PQST. Our results show that PQST reduces measurement cost, achieving fidelities of 98.68% and 95.07% after measuring 75 and 99 observables for six-qubit and nine-qubit W states, respectively. Furthermore, the reconstruction of the largest density matrix of the 12-qubit W state is achieved with the similarity of 89.23% after just measuring 243 parallel observables, while 3^{12}=531 441 complete observables are needed for FQST. Consequently, PQST will be a useful tool for future tasks such as the reconstruction, characterization, benchmarking, and properties learning of states.
Quantum process tomography (QPT) is a fundamental task to characterize the dynamics of quantum systems. In contrast to standard QPT, ancilla-assisted process tomography (AAPT) framework introduces an extra ancilla system such that a single input state is needed. In this paper, we extend the two-stage solution, a method originally designed for standard QPT, to perform AAPT. Our algorithm hasO(MdA2dB2)computational complexity whereMis the type number of the measurement operators,dAis the dimension of the quantum system of interest, anddBis the dimension of the ancilla system. Then we establish an error upper bound and further discuss the optimal design on the input state in AAPT. A numerical example on a phase damping process demonstrates the effectiveness of the optimal design and illustrates the theoretical error analysis.