Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE

AC atom interferometry with quantum lock-in sensing

Jonathan Coslovsky, Gadi Afek, Nir Davidson

Published Feb 20, 2017• 2 citations
Publisher

Abstract

This paper describes a technique that allows measurement of very small alternating accelerations. It is based on a quantum version of a lock-in amplifier,1 which filters out spectral components far from the frequency of the measured signal, improving the signal-to-noise ratio of the measurement. As a proof-of-principle, a controlled experiment using microwave radiation is performed, modulating the phase of the control pulses at a given frequency. A strong response at twice the modulation frequency is observed as expected. Preliminary results of measurements taken with Raman control are also presented, in which a controlled modulation of the phase was obtained by modulating a piezoelectric actuator, causing one of the Raman mirrors to vibrate.

DOI
10.1117/12.2257344

Related papers

Quantum lock-in measurement of weak alternating signals

Min Zhuang, Sijie Chen, Jiahao Huang +1 more

Abstract The detection of weak time-dependent alternating signals in a strongly noisy background is an important problem in physics and a critical task in metrology. Quantum lock-in amplifier can extract alternating signals within extreme noises by using suitable quantum resources, which has been widely used for magnetic field sensing, vector light shift detection, and force detection. In particular, entanglement-enhanced quantum lock-in amplifier can be realized via many-body quantum interferometry. The many-body lock-in measurement provides a feasible way to achieve high-precision detection of alternating signals, even in noisy environments. In this article, we review general protocol, experiment progresses and potential applications of quantum lock-in measurements.

Quantum Frontiers•Feb 26, 2024•7 citations

Many-Body Quantum Lock-In Amplifier

Min Zhuang, Jiahao Huang, Chaohong Lee

Achieving high-precision detection of time-dependent signals within noise is a ubiquitous issue in physics and a critical task in metrology.Lock-in amplifiers are detectors that can extract alternating signals within extreme noise via a known carrier frequency.Here we present a protocol for achieving an entanglement-enhanced lock-in amplifier via use of many-body multipulse quantum interferometry.The many-body quantum lock-in amplifier is implemented by application of a periodic multi-π -pulse sequence during the interrogation.Our analytic results show that, by our choosing suitable input states and readout operations, the frequency and amplitude of an unknown alternating field can be simultaneously extracted via population measurements.The lock-in point can be determined via the symmetry of the signal during a single interrogation time or the time-averaged signals for multiple interrogation times.We find that the measurement signal at the lock-in point is independent of the interrogation time.In particular, if we input spin cat states and apply interaction-based readout operations, the measurement precisions for frequency and amplitude can both approach the Heisenberg limit.Moreover, our many-body quantum amplifier is also robust with regard to extreme stochastic noise.Our study paves a new way for measuring time-dependent signals with many-body quantum systems, and provides a feasible method for achieving Heisenberg-limited detection of alternating signals.

arXiv:2010.06849•PRX Quantum•Oct 26, 2021•12 citations

A modified Michelson interferometer type Raman laser system for atom interferometers

Ningfang Song, Xiangxiang Lu, Wei Li +5 more

We have developed a modified Michelson interferometer type Raman laser system to manipulate cold 87 Rb atoms to interfere. A frequency modulated continuous wave technique was introduced to determine the optical path difference, thus compensating it to zero to minimize the effects of common mode noise. The linewidth (full width at half maximum) of the beat signal at 6.834 GHz was measured to 1Hz limited by the resolution bandwidth of the spectral analyzer. The measured rms phase variance of the phase noise at 166 MHz was 0.015 rad2, mainly restricted by our poor performance radio frequency microwave source. With modest improvements, we plan to apply this laser system to form an atom interferometer for acceleration and rotation measurements.

arXiv:1407.4013•Jul 15, 2014•0 citations

High-frequency dual-channel lock-in detection via rapidly oscillating driving

Kangze Li, Xu Zhao, Liantuan Xiao +1 more

Here we propose a general protocol for dual-channel lock-in detection of high-frequency ac signals. We find that the effect of a high-frequency target signal can be modulated through the application of rapidly oscillating driving fields. Based on this mechanism, we develop a quantum dual-channel lock-in detection protocol for high-frequency signals, which not only extends the accessible frequency range of quantum sensing but also enables the simultaneous estimation of the signal amplitude and initial phase. Furthermore, we present a feasible implementation scheme of the protocol based on nitrogen-vacancy centers in diamond. Numerical simulations demonstrate that the proposed protocol can effectively filter out background noise and significantly improve the signal-to-noise ratio. Our results provide a promising approach for realizing noise-resistant detection of weak signals in the high-frequency regime.

quant-pharXiv:2607.17854•Jul 21, 2026•0 citations

Quantum double lock-in amplifier

Sijie Chen, Min Zhuang, Ruihuang Fang +5 more

Abstract Quantum lock-in amplifiers have been proposed to extract an alternating signal from a strong noise background. However, due to the typical target signal has unknown initial phase, it is challenging to extract complete information about the signal’s amplitude, frequency, and initial phase. Here, we present a general protocol for achieving a quantum double lock-in amplifier by employing two quantum mixers operating under orthogonal pulse sequences. To demonstrate the practical implementation, we discuss the experimental feasibility using a five-level double-Λ coherent population trapping system with Rb atoms. Here, each Λ structure acts as a quantum mixer, and two applied dynamical decoupling sequences serve as orthogonal reference signals. Notably, the system significantly reduces the total measurement time by nearly half and mitigates time-dependent systematic errors compared to conventional two-level systems. Furthermore, our quantum double lock-in amplifier is robust against experimental imperfections. This study establishes a pathway to alternating signal measurement, thereby facilitating the development of practical quantum sensing technologies.

arXiv:2303.07559•Communications Physics•Jun 13, 2024•11 citations

Quantum Lock-In Detection via Successive Adiabatic Evolution

Kangze Li, Siqi Chen, Hao Zhang +3 more

In recent years, quantum lock-in detection has emerged as a promising technique to accurately detect weak signals submerged in background noise. However, the signal-to-noise ratio of existing protocols is severely limited by spectral leakage resulting from control operations implemented in pulse form. Here, we propose a general protocol for realizing quantum lock-in detection by employing successive quantum adiabatic evolution. In our protocol, the signal modulation is achieved by adiabatically controlling the time evolution of the quantum probe, which enables the implementation of sinusoidal modulation functions. The realization of sinusoidal-wave modulation substantially mitigates the problem of spectral leakage and facilitates the extraction of the complete characteristics of the target signals. We present a practical implementation scheme of adiabatic quantum lock-in detection based on nitrogen-vacancy centers in diamond, and demonstrate that the proposed protocol possesses strong resilience against experimental imperfections. Our results establish adiabatic quantum lock-in detection as a robust and experimentally accessible approach to detection of weak alternating signals in noisy environments, thus promoting the advance of real-world quantum sensing technologies.

quant-pharXiv:2607.15121•Quantum Science and Technology•Jul 17, 2026•1 citation
This paper describes a technique that allows measurement of very small alternating accelerations. It is based on a quantum version of a lock-in amplifier,1 which filters out spectral components far from the frequency of the measured signal, improving the signal-to-noise ratio of the measurement. As a proof-of-principle, a controlled experiment using microwave radiation is performed, modulating the phase of the control pulses at a given frequency. A strong response at twice the modulation frequency is observed as expected. Preliminary results of measurements taken with Raman control are also presented, in which a controlled modulation of the phase was obtained by modulating a piezoelectric actuator, causing one of the Raman mirrors to vibrate.
Abstract The detection of weak time-dependent alternating signals in a strongly noisy background is an important problem in physics and a critical task in metrology. Quantum lock-in amplifier can extract alternating signals within extreme noises by using suitable quantum resources, which has been widely used for magnetic field sensing, vector light shift detection, and force detection. In particular, entanglement-enhanced quantum lock-in amplifier can be realized via many-body quantum interferometry. The many-body lock-in measurement provides a feasible way to achieve high-precision detection of alternating signals, even in noisy environments. In this article, we review general protocol, experiment progresses and potential applications of quantum lock-in measurements.
Achieving high-precision detection of time-dependent signals within noise is a ubiquitous issue in physics and a critical task in metrology.Lock-in amplifiers are detectors that can extract alternating signals within extreme noise via a known carrier frequency.Here we present a protocol for achieving an entanglement-enhanced lock-in amplifier via use of many-body multipulse quantum interferometry.The many-body quantum lock-in amplifier is implemented by application of a periodic multi-π -pulse sequence during the interrogation.Our analytic results show that, by our choosing suitable input states and readout operations, the frequency and amplitude of an unknown alternating field can be simultaneously extracted via population measurements.The lock-in point can be determined via the symmetry of the signal during a single interrogation time or the time-averaged signals for multiple interrogation times.We find that the measurement signal at the lock-in point is independent of the interrogation time.In particular, if we input spin cat states and apply interaction-based readout operations, the measurement precisions for frequency and amplitude can both approach the Heisenberg limit.Moreover, our many-body quantum amplifier is also robust with regard to extreme stochastic noise.Our study paves a new way for measuring time-dependent signals with many-body quantum systems, and provides a feasible method for achieving Heisenberg-limited detection of alternating signals.
We have developed a modified Michelson interferometer type Raman laser system to manipulate cold 87 Rb atoms to interfere. A frequency modulated continuous wave technique was introduced to determine the optical path difference, thus compensating it to zero to minimize the effects of common mode noise. The linewidth (full width at half maximum) of the beat signal at 6.834 GHz was measured to 1Hz limited by the resolution bandwidth of the spectral analyzer. The measured rms phase variance of the phase noise at 166 MHz was 0.015 rad2, mainly restricted by our poor performance radio frequency microwave source. With modest improvements, we plan to apply this laser system to form an atom interferometer for acceleration and rotation measurements.
Here we propose a general protocol for dual-channel lock-in detection of high-frequency ac signals. We find that the effect of a high-frequency target signal can be modulated through the application of rapidly oscillating driving fields. Based on this mechanism, we develop a quantum dual-channel lock-in detection protocol for high-frequency signals, which not only extends the accessible frequency range of quantum sensing but also enables the simultaneous estimation of the signal amplitude and initial phase. Furthermore, we present a feasible implementation scheme of the protocol based on nitrogen-vacancy centers in diamond. Numerical simulations demonstrate that the proposed protocol can effectively filter out background noise and significantly improve the signal-to-noise ratio. Our results provide a promising approach for realizing noise-resistant detection of weak signals in the high-frequency regime.
Abstract Quantum lock-in amplifiers have been proposed to extract an alternating signal from a strong noise background. However, due to the typical target signal has unknown initial phase, it is challenging to extract complete information about the signal’s amplitude, frequency, and initial phase. Here, we present a general protocol for achieving a quantum double lock-in amplifier by employing two quantum mixers operating under orthogonal pulse sequences. To demonstrate the practical implementation, we discuss the experimental feasibility using a five-level double-Λ coherent population trapping system with Rb atoms. Here, each Λ structure acts as a quantum mixer, and two applied dynamical decoupling sequences serve as orthogonal reference signals. Notably, the system significantly reduces the total measurement time by nearly half and mitigates time-dependent systematic errors compared to conventional two-level systems. Furthermore, our quantum double lock-in amplifier is robust against experimental imperfections. This study establishes a pathway to alternating signal measurement, thereby facilitating the development of practical quantum sensing technologies.
In recent years, quantum lock-in detection has emerged as a promising technique to accurately detect weak signals submerged in background noise. However, the signal-to-noise ratio of existing protocols is severely limited by spectral leakage resulting from control operations implemented in pulse form. Here, we propose a general protocol for realizing quantum lock-in detection by employing successive quantum adiabatic evolution. In our protocol, the signal modulation is achieved by adiabatically controlling the time evolution of the quantum probe, which enables the implementation of sinusoidal modulation functions. The realization of sinusoidal-wave modulation substantially mitigates the problem of spectral leakage and facilitates the extraction of the complete characteristics of the target signals. We present a practical implementation scheme of adiabatic quantum lock-in detection based on nitrogen-vacancy centers in diamond, and demonstrate that the proposed protocol possesses strong resilience against experimental imperfections. Our results establish adiabatic quantum lock-in detection as a robust and experimentally accessible approach to detection of weak alternating signals in noisy environments, thus promoting the advance of real-world quantum sensing technologies.