Cryogenic CMOS, or cryo-CMOS circuits and systems, are emerging in VLSI design for many applications, in primis quantum computing. Fault-tolerant quantum bits (qubits) in surface code configurations, one of the most accepted implementations in quantum computing, operate in deep sub-Kelvin regime and require scalable classical control circuits. In this paper we advocate the need for a new generation of deep-submicron CMOS circuits operating at deep-cryogenic temperatures to achieve the performance required in a fault-tolerant qubit system. We outline the challenges and limitations of operating CMOS in near-zero Kelvin regimes and we propose solutions. The paper concludes with several examples showing the suitability of integrating fault-tolerant.qubits with CMOS.
Cryogenic CMOS, or cryo-CMOS circuits and systems, are emerging in VLSI design for many applications, in primis quantum computing. Fault-tolerant quantum bits (qubits) in surface code configurations, one of the most accepted implementations in quantum computing, operate in deep sub-Kelvin regime and require scalable classical control circuits. In this paper we advocate the need for a new generation of deep-submicron CMOS circuits operating at deep-cryogenic temperatures to achieve the performance required in a fault-tolerant qubit system. We outline the challenges and limitations of operating CMOS in near-zero Kelvin regimes and we propose solutions. The paper concludes with several examples showing the suitability of integrating fault-tolerant.qubits with CMOS.
Quantum computers hold the promise to solve some of the most complex problems of today. The core of a quantum computer is a quantum processor, which is composed of quantum bits (qubits). Qubits are fragile and their state needs to be corrected in real time by a classical controller. Today, the control of qubits is done at room temperature by racks of instruments, while qubits operate at several tens of milli-Kelvin. To ensure compactness, and eventually scalability, we have proposed the use of controllers operating at a few Kelvin, so as to reduce the length of control cables, while potentially enabling superconductive interconnects, which enable virtually zero resistance and low thermal conductivity. We have chosen CMOS to achieve this functionality due to its scalable nature and overall miniaturization opportunities. Cryogenic CMOS, or cryo-CMOS, circuits and systems need to be carefully designed, so as to ensure low noise and high bandwidth, while operating at strict power budgets of a few milliwatts per qubit. In this paper, we outline the requirements of a classical controller and we show examples of such circuits and systems. Results and perspectives are presented discussing a roadmap for the future.
Quantum computers hold the promise to solve some of the most complex problems of today. The core of a quantum computer is a quantum processor, which is composed of quantum bits (qubits). Qubits are fragile and their state needs to be corrected in real time by a classical controller. Today, the control of qubits is done at room temperature by racks of instruments, while qubits operate at several tens of milli-Kelvin. To ensure compactness, and eventually scalability, we have proposed the use of controllers operating at a few Kelvin, so as to reduce the length of control cables, while potentially enabling superconductive interconnects, which enable virtually zero resistance and low thermal conductivity. We have chosen CMOS to achieve this functionality due to its scalable nature and overall miniaturization opportunities. Cryogenic CMOS, or cryo-CMOS, circuits and systems need to be carefully designed, so as to ensure low noise and high bandwidth, while operating at strict power budgets of a few milliwatts per qubit. In this paper, we outline the requirements of a classical controller and we show examples of such circuits and systems. Results and perspectives are presented discussing a roadmap for the future.
The core of a quantum computer is a quantum processor, which is composed of quantum bits (qubits). Qubits can be implemented in many flavors, but they are fragile, and their state has a tendency to decay in time. To be usable for computation, qubits must be corrected in real time by a classical controller. The controller must also see that desired computations are executed. Today, the control of qubits is performed at room temperature (RT) by racks of instruments, while the qubits operate at several tens of milli-Kelvin. To ensure compactness and, eventually, scalability, we have proposed and implemented CMOS circuits designed to operate at a few degrees Kelvin. This makes complex thermalization circuits unnecessary, potentially enabling superconductive interconnects, which would enable virtually zero resistance and low thermal conductivity. Cryogenic CMOS, or cryo-CMOS, technology was chosen to achieve classical control due to its scalable nature and overall miniaturization opportunities. Cryo-CMOS circuits and systems need to be carefully designed to ensure strict power budgets, while achieving quite advanced specifications in terms of noise and bandwidth. We review the requirements of a classical controller and cryo-CMOS circuits and systems developed for spin qubits in our lab. Results and perspectives are presented with a discussion about a road map for the future.
A fault-tolerant quantum computer with millions of quantum bits (qubits) requires massive yet very precise control electronics for the manipulation and readout of individual qubits. CMOS operating at cryogenic temperatures down to 4 K (cryo-CMOS) allows for closer system integration, thus promising a scalable solution to enable future quantum computers. In this paper, a cryogenic control system is proposed, along with the required specifications, for the interface of the classical electronics with the quantum processor. To prove the advantages of such a system, the functionality of key circuit blocks is experimentally demonstrated. The characteristic properties of cryo-CMOS are exploited to design a noise-canceling low-noise amplifier for spin-qubit RF-reflectometry readout and a class-F2,3digitally controlled oscillator required to manipulate the state of qubits.
A fault tolerant scalable quantum computer requires more than 1000 Qubits to perform real time state correction and to improve the Qubit coherence time. The dense wiring connections required between the quantum processor placed at a 100 mK temperature and the room temperature control and readout electronics serve as a limiting factor in this system. Qubit control and readout electronics operating at 4 K temperature, placed closer to a quantum processor inside the dilution refrigerator avoids the dense wiring connections to room temperature electronics, and hence, serve as a potential solution to realize a scalable quantum computer. However, with no CMOS process technology models available at cryogenic temperatures, the design of a fully integrated, ultra-low power Qubit control and readout electronics at a sub-1 mW power consumption proves to be extremely challenging. In recent years, there has been a huge rise in interest among the research communities to understand and solve the device and circuit level challenges at deep cryogenic temperatures. This paper presents an overview of the recently published active and passive device nonidealities, circuit design challenges and solutions, and the future research directions in the Qubit control and readout electronics operating at deep cryogenic temperatures.
Accurate and low-noise generation and amplification of microwave signals are required for the manipulation and readout of quantum bits (qubits). A fault-tolerant quantum computer operates at deep cryogenic temperatures (i.e., <; 100mK) and requires thousands of qubits for running practical quantum algorithms. Consequently, CMOS radio-frequency (RF) integrated circuits operating at cryogenic temperatures down to 4 K (Cryo-CMOS) offer a higher level of system integration and scalability for future quantum computers. In this paper, we extensively discuss the role, benefits, and constraints of Cryo-CMOS for qubits control and readout. The main characteristics of the CMOS transistors and their impacts on RF circuit designs are described. Furthermore, opportunities and challenges of low noise RF signal generation and amplification are investigated.