Rydberg atom, which exhibits a strong response to weak electric fields, is regarded as a promising atomic receiver to surpass the sensitivity of conventional receivers. However, its sensitivity is strongly limited by the noise coming from both classical and quantum levels, and how to enhance it significantly remains challenging. In theory, we aim to optimize the laser array, highlighting the importance of coherence among microwave signals and the uniformity of laser beam power within the array, to enhance the signal-to-noise ratio (SNR) and elevate sensitivity to a new standard. To enhance practical application mobility and integration, we propose two optimization schemes: a six-port fiber-coupled vapor cell probe array and cascaded diffraction gratings. We maintain steady MW signal coherence in the laser array by using identical vapor cells and positioning the probe lasers on the incident wave’s equal phase plane. Our findings reveal that the wavefront phase difference for the six-port fiber-coupled vapor cell array is 10°, while the cascaded diffraction gratings show a 16° difference, with laser intensity uniformity reaching 90.4%. In our experiment, a 4.6-dB SNR enhancement was achieved by utilizing the cascaded diffraction gratings to generate2×2probe laser arrays compared to the performance of a laser beam, which can be enhanced further just by adding more laser beams. In particular, a2×2laser array experimental verification yielded19nv/cm/Hz@8.57 GHz. More importantly, the intermediate signals of the laser array maintain coherence. Therefore, SNR improvement is allowed even in detecting weak target signals amid strong noise and clutter. The results could offer an avenue for the design and optimization of ultrahigh-sensitivity Rydberg atomic receivers and promote applications in cosmology, meteorology, communication, and MW quantum technology.
We present experimental and theoretical results on a new interferometer topology that nests a SU(2) interferometer, e.g., a Mach-Zehnder or Michelson interferometer, inside a SU(1,1) interferometer, i.e., a Mach-Zehnder interferometer with parametric amplifiers in place of beam splitters. This SU(2)-in-SU(1,1) nested interferometer (SISNI) simultaneously achieves a high signal-to-noise ratio (SNR), sensitivity beyond the standard quantum limit (SQL) and tolerance to photon losses external to the interferometer, e.g., in detectors. We implement a SISNI using parametric amplification by four-wave mixing (FWM) in Rb vapor and a laser-fed Mach-Zehnder SU(2) interferometer. We observe path-length sensitivity with SNR 2.2 dB beyond the SQL at power levels (and thus SNR) 2 orders of magnitude beyond those of previous loss-tolerant interferometers. We find experimentally the optimal FWM gains and find agreement with a minimal quantum noise model for the FWM process. The results suggest ways to boost the in-practice sensitivity of high-power interferometers, e.g., gravitational wave interferometers, and may enable high-sensitivity, quantum-enhanced interferometry at wavelengths for which efficient detectors are not available.
We investigate the nonlinear frequency conversion of nondiffracting optical modes via a nondegenerate four-wave mixing (FWM) process in rubidium vapor. In this process, two strong control fields and a weak probe field mutually interact via a four-level double-$\mathrm{\ensuremath{\Lambda}}$ type atomic system to produce a low frequency weak Stokes field which is a phase conjugate to probe. We show that any arbitrary mode such as Airy, Bessel, Mathieu, and Weber beams encoded initially in the spatial envelope of the probe field are efficiently transferred to the FWM Stokes field by satisfying the phase-matching condition. Interestingly, we found that the transmitted intensity profiles of the Stokes beam are identical to that of the probe beam, while the phase profile is complementary. The phase conjugation property of output beams is revealed by interfering them with a copropagating plane wave. We further found the fidelity in terms of structural similarity between two transmitted modes of about 99, which substantiates the high efficiency of the FWM process. The efficient transfer and frequency conversion of such diffraction-free beams may have potential applications in nonlinear optical and quantum technologies.