Coupled cantilevers are trapped by laser in a 3-mirror configuration. We studied the signal transduction between the cantilevers by laser control. A force or displacement sensor with such laser trapping technique could achieve much higher sensitivity, as high as 3-4 orders as compared to a single cantilever. We also studied the energy transfer processes by laser trapping and manipulation. Rabi oscillations are observed. Quantum analog Landau-Zener Tunneling and Landau-Zener-Stuckelburg interferometry are realized in the classical regime. We have proved that the energy or signals could be transferred from one cantilever to the other in the real-space by laser manipulation. Laser manipulated coupled cantilvers have great potentials in precision measurements and in quantum information processing.
Coupled cantilevers are trapped by laser in a 3-mirror configuration. We studied the signal transduction between the cantilevers by laser control. A force or displacement sensor with such laser trapping technique could achieve much higher sensitivity, as high as 3-4 orders as compared to a single cantilever. We also studied the energy transfer processes by laser trapping and manipulation. Rabi oscillations are observed. Quantum analog Landau-Zener Tunneling and Landau-Zener-Stuckelburg interferometry are realized in the classical regime. We have proved that the energy or signals could be transferred from one cantilever to the other in the real-space by laser manipulation. Laser manipulated coupled cantilvers have great potentials in precision measurements and in quantum information processing.
Coupled nanomechanical resonators have recently attracted much attention for both fundamental studies in physics and broad applications in high-precession detection or sensing. By studying the Landau-Zener transitions and Rabi oscillation of two coupled resonators, it has been shown that such a two-mode system acts as a classical two-level system bearing the analog to a quantum mechanical two-level one. Here we construct a Stückelberg interferometer with two coupled cantilevers by driving the system through the avoided crossing twice. By measuring the non-adiabatic phase acquired at the Landau-Zener transition, we unveil an in-depth analog between the two-mode and quantum two-level systems. Our study opens up new opportunities for constructing interferometers with classical devices.
This work investigates different coupling mechanisms between ultracold atoms and mechanical oscillators. In a first experiment, atom-surface force is used to couple the vibrations of a mechanical cantilever to the motion of a Bose-Einstein condensate in a magnetic microtrap on a chip. The atoms are trapped at sub-micrometer distance from the cantilever surface. Coupling is used to read out the cantilever vibrations with the atoms. Coupling via surface forces could be employed to couple atoms to molecular-scale oscillators such as carbon nanotubes. In a second experiment, coupling via a 1D optical lattice that is formed by a laser beam retroreflected from the cantilever tip. The optical lattice serves as a transfer rod which couples vibrations of the cantilever to the atoms and vice versa.
The coupling of nanomechanical resonators to controllable quantum systems represents a growing and promising area of research. Recent advances in this field have brought to astonishing results, such as the initialization of a mechanical resonator into its quantum ground state and even the preparation of non-classical coherent states of motion. These achievements open up appealing scenarios to quantum information technologies and to the exploration of the quantum-classical boundary. From an application perspective, such quantum-mechanical hybrid systems provide a versatile and attractive tool for a variety of precision measurements, like ultra-sensitive detection of force, mass, and displacement. \n \nQuantum control over a mechanical resonator, or, conversely, the prospect of using resonator's motion for probing quantum states, both involve some tight requirements. First of all, the interaction between the mechanics and its quantum partner has to be large on the scale of the decoherence rates of the coupled systems. In most cases, the coupling mechanism has to be activated by engineering the resonator with electrodes, magnets, or mirrors, or by using tailored laser fields. For this reason, the search for a strong coupling typically competes with the requirement of overcoming decoherence effects. In addition, for quantum effects to be observable, strong coupling has to be accompanied by the preparation of zero entropy initial states, for instance by cooling the resonator into its ground state of motion. \n \nThe motivation pursued by this thesis is to contribute to the inspiring field of hybrid systems by walking through each of the aforementioned directions. We in fact demonstrate a promising system in which optically active quantum dots, embedded in fully self-assembled core-shell nanowires, are coupled to the nanowire motion. Mechanical vibrations of the nanowire modulate the quantum dot emission energy over a broad range exceeding 14 meV, by means of deformation potential coupling. In our system, therefore, both the coupling mechanism and the quantum states themselves are intrinsic to the resonator's structure. Besides revealing unusually strong, such a built-in opto-mechanical interaction produces a hybrid system whose inherent coherence is unspoiled by any functionalization or external field and whose fabrication is simpler than top-down techniques. \n \nWe further demonstrate the use of a quantum point contact as a displacement transducer to measure and control the low-temperature thermal motion of a nearby micromechanical cantilever. We show that by including the QPC in a suitable feedback loop, we are able to cool the cantilever's fundamental mechanical mode down to the level of the measurement noise, achieving a squashing of the QPC noise at high gain. Due to its off-board design, our system is particularly versatile and suitable to force-sensing applications. Since the QPC transducer is sensitive to local modifications of the nearby electric field, our approach is in principle compatible with any nanoscale resonator, without requiring any functionalization to activate the coupling. By improving the performance of the QPC as a one-dimensional conductor and the cantilever-QPC capacitive coupling, our system has the potential to achieve quantum-limited displacement resolution and ground state cooling. We then report on some ongoing attempts to overcome the current limitations of our system and couple mechanical motion to different mesoscopic transport devices. \n \nWe remark that our demonstration of an as-grown quantum-dot-in-nanowire hybrid system opens up bright prospects on future experiments, as also testified by the very recent ferment of the scientific community around this topic. We find that the opto-mechanical coupling rate is not far from the nanowire mechanical frequency. This fact makes our system particularly promising for the quantum non-demolition readout of a quantum dot state through a measurement of the nanowire position. On the other hand, we show that the coupling can be further optimized, and the nanowire mechanical heating rate reduced, thus disclosing the captivating perspective of using quantum dots to probe and control the mechanical state of a nanowire. In this context, it would be important to investigate a possible spin-oscillator coupling in our system, given the long coherence time offered by a spin state in a quantum dot. The wide range of control over the quantum dots emission energy and the ability to tune two neighboring dots into resonance pave the way to mechanically induced emitter-emitter coupling. In addition, our monolithic opto-mechanical system constitutes a good candidate for recent proposals of a tripartite hybrid system, which would integrate an optical cavity, a quantum two-level system and a mechanical resonator. The intrinsically strong coupling between the quantum dots and the nanowire motion would enhance the interaction between the mechanics and the cavity field, leading for instance to efficient cooling of the resonator to the ground state. Finally, the quantum dot sensitivity to the nanowire resonant vibration could also support the use of our system as an integrated force probe or as a nanomechanical mass sensor. In other words, the results reported in this dissertation constitute not only a relevant proof-of-principle, moreover they open up intriguing challenges for future research.
Summary form only given. Techniques for cooling and trapping atoms now provide unique capabilities for the manipulation of atoms. In particular, they make possible very low temperatures, extraordinarily high atomic phase space densities, and long perturbation-free observation times. These capabilities enable one to carry out many new measurements on atoms with great precision and/or in entirely new regimes of temperature and density. This tutorial will concentrate primarily on the practical aspects of how to apply current laser cooling and trapping techniques. This will include descriptions of the various techniques and their capabilities, as well as a discussion of tradeoffs between price, complexity, and various performance parameters. Finally, I will briefly discuss how these techniques are applied in a number of specific cases including cold collisions, precision measurements including atomic clocks, atom interferometry, collecting radioactive isotopes, and the creation of Bose-Einstein condensates.
Nonlinear interferometers that replace beam splitters in Mach-Zehnder interferometers with nonlinear amplifiers for quantum-enhanced phase measurements have drawn increasing interest in recent years, but practical quantum sensors based on nonlinear interferometry remain an outstanding challenge. Here, we demonstrate the first practical application of nonlinear interferometry by measuring the displacement of an atomic force microscope microcantilever with quantum noise reduction of up to 3 dB below the standard quantum limit, corresponding to a quantum-enhanced measurement of beam displacement of 1.7 fm/sqrt[Hz]. Further, we minimize photon backaction noise while taking advantage of quantum noise reduction by transducing the cantilever displacement signal with a weak squeezed state while using dual homodyne detection with a higher power local oscillator. This approach may enable quantum-enhanced broadband, high-speed scanning probe microscopy.
Manipulating quantum states is at the heart of quantum information processing and quantum metrology. Landau-Zener Rabi oscillation (LZRO), which arises from a quantum two-level system swept repeatedly across the avoided crossing point in the time domain, has been suggested for widespread use in manipulating quantum states. Cold atom is one of the most prominent platforms for quantum computing and precision measurement. However, LZRO has never been observed in cold atoms due to its stringent requirements. By compensating for the linear drift of the clock laser and optimizing experimental parameters, we successfully measured LZRO on the strontium atomic optical clock platform under both fast and slow passage limits within 4 to 6 driving periods. Compared to previous results on other platforms, the duration of the plateau is 104 times longer in the optical lattice clock. The experimental data also suggest that destructive Landau-Zener interference can effectively suppress dephasing effects in the optical lattice clock, paving the way for manipulating quantum states against various environmental effects in cold atomic systems.