Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Towards measuring quantum sound

Maria Ekström

Published Jan 1, 2016• 0 citations
OpenAlex

Abstract

One of the most fundamental phenomena occurring in nature is the interaction between single atoms and electromagnetic fields. This is studied in quantum optics to probe the quantum nature of the system. In appended Paper I, we demonstrated that an artificial atom can couple to propagating sound, which is the acoustic analogue of quantum optics. This thesis covers experiments where surface acoustic waves (SAWs) are used in superconducting circuits at gigahertz frequencies with the aim for quantum applications.Since SAWs are mechanical vibrations that propagate on the surface of solids and dissipate little power, they can propagate freely over long distances before and after they interact with the artificial atom. Their five order of magnitude slower speed and smaller wavelength than light at gigahertz frequencies, open up for exploring new regimes of quantum physics. In addition, the coupling between the artificial atom and the SAWs is promising for reaching ultrastrong coupling limits, which is hard in other types of systems. Many of the future applications are discussed in appended Paper II, together with a more detailed description of the theory and fabrication of the devices.Although the possibilities are many, a variety of potential experiments would benefit from higher conversion efficiency between electric signals and SAWs. Therefore, improvements of this conversion are studied in appended Paper III, making use of the many advances in classical SAW devices. More specifically, the conversion of unidirectional transducers (UDTs) on lithium niobate is studied and compared to symmetric interdigital transducers (IDTs). The results show that 99.4 % of the acoustic power can be focused in the desired direction and that the conversion between electric signals and SAWs is greatly improved by using UDTs, eliminating the largest contribution to loss of the IDTs. However, there is a trade-off between conversion efficiency and bandwidth. This knowledge allows us to better tailor potential quantum experiments based on SAWs, possibly towards measuring quantum sound.

Related papers

Quantum acoustics with propagating phonons

Maria Ekström

Surface acoustic waves (SAWs) are mechanical vibrations that propagate on the surface of solids while dissipating little power, consequently enabling them to propagate freely over long distances. The speed and wavelength of SAWs are reduced a five order of magnitude compared to when light is used as a carrier at gigahertz frequencies. The unique properties of SAWs combined with the possibility to let them interact with artificial atoms, discovered and shown for the very first time in appended Paper I of this thesis, open up for exploration of new regimes of quantum physics. The appended Paper II is a book chapter providing an overview of many of the new areas of research, as well as going into depth of the method and significance of the results ofthe appended Paper I.The essential interaction between artificial atoms and SAWs was further investigated by using Autler-Townes splitting to achieve fast control of the interactions. The appended Paper IV, shows a transmitted field extinction of 80 %, and provides proof of concept for a SAW router in the quantum regime. In addition, due to the artificial atom's highly frequency dependent coupling to SAWs, electromagnetically induced transparency (EIT) could be observed in the appended Paper V. Furthermore, the EIT region was distinguished from the Autler-Townes splitting region by a threshold in the applied power. The results produce parallel findings to quantum optics, but are perhaps best described as part of a different field, quantum acoustics.Among the many possible areas of research emerging as an outcome of this work, a variety of potential quantum experiments would benefit greatly from a higher conversion efficiency between electric signals and SAWs. Due to this, focus was put on improving this conversion efficiency by studying superconducting unidirectional transducers (UDTs), making use of advances in classical SAW devices. The appended Paper III shows that 99.4~\\% of the acoustic power can be focused in a desired direction and that the conversion between electric signals and SAWs is greatly improved by using UDTs, thereby eliminating the largest source of loss of symmetric inter-digital transducers. There is, however, a trade-off between conversion efficiency and bandwidth. This finding allows tailoring of quantum experiments based on SAWs that may pave the way towards measuring quantum sound.

•Jan 1, 2020•0 citations

Quantum acoustics with superconducting circuits

Gustav Andersson

The past 20 years has seen rapid developments in circuit quantum electrodynamics, where superconducting qubits and resonators are used to control and study quantum light-matter interaction at a fundamental level. The development of this field is strongly influenced by quantum information science and the prospect of realizing quantum computation, but also opens up opportunities for combinations of different physical systems and research areas. Superconducting circuits in the microwave domain offer a versatile platform for interfacing with other quantum systems thanks to strong nonlinearities and zero-point fluctuations, as well as flexibility in design and fabrication. Hybrid quantum systems based on circuit quantum electrodynamics could enable novel functionalities by exploiting the strengths of the individual components.This thesis covers experiments coupling superconducting circuits to surface acoustic waves (SAWs), mechanical waves propagating along the surface of a solid. Strong coupling can be engineered using the piezoelectric properties of GaAs substrates, and our experiments exploit this to investigate phenomena in quantum field-matter interaction. A key property of surface acoustic waves is the slow propagation speed, typically five orders of magnitude slower than light in vacuum, and the associated short wavelength. This enables the giant atom regime where the artificial atom in the form of a superconducting circuit is large compared to the wavelength of interacting SAW radiation, a condition which is difficult to realize in other systems. Experiments described in this thesis use these properties to demonstrate electromagnetically induced transparency for a mechanical mode, as well as non-Markovian interactions between an artificial giant atom and the SAW field. When the SAW field is confined to a resonant cavity, the short wavelength allows multimode spectra suitable for interacting with a frequency comb. We use a multimode SAW resonator to characterize the ensemble of microscopic two-level system defects with a two-tone spectroscopy approach. Finally, we introduce a hybrid superconducting-SAW resonator with applications in quantum information processing in mind. Experiments with this device demonstrate entanglement of SAW modes, and show promising results on the way to engineer cluster states for quantum computation in continuous variables.

•Jan 1, 2020•0 citations

Quantum Electro- and Acoustodynamics in Waveguides

Andreas Ask

The study of light-matter interaction in superconducting quantum circuits has seen remarkable progress over the last $20$ years. By engineering artificial atoms, novel quantum phenomena have been demonstrated, and old ideas have come into a new light. Beyond their application to basic science, the prospect of implementing large-scale quantum information processing with superconducting circuits has fueled a rapid development of surrounding technologies, with ever-increasing control over their behavior as a result. The field's success stems primarily from the flexible design and strong non-linearity of the artificial atom, whose coherent interaction with both electrical and mechanical degrees of freedom has opened many doors for science. This thesis deals with the interaction between artificial atoms and quantum fields in one-dimensional waveguides. The waveguide represents a one-dimensional environment for the atom, which we use to study the properties of open quantum systems. All quantum systems are, in fact, open, and interactions between the system and its environment lead inevitably to a loss of energy and quantum coherence. A continuous loss of information into the environment is called a Markovian process. The work contained in this thesis indicates that deviations from a Markovian process can be detected in the steady state of driven systems. This could simplify the detection of non-Markovianity in open quantum systems, as no information about the system's transient dynamics would be necessary.Specifically, this thesis considers both electromagnetic fields in microwave transmission lines and acoustic fields in the form of surface acoustic waves (SAWs) traveling on the surface of solids. The recent realization of artificial atoms interacting with acoustic waves has opened up a new research field called quantum acoustics. We have built a model of the interaction between atoms and SAWs that predicts the existence of a new regime where the atom forms its own cavity. Additionally, we have considered synthesizing electromagnetically induced transparency, a quantum optics phenomena in opaque media where the absorption of photons is canceled, in waveguides using multiple closely spaced two-level systems. Some of the work in this thesis represents experimental work done in collaboration. In the first experiment, we studied the routing of acoustic waves at the quantum level. In the other experiment, we demonstrated electromagnetically induced transparency by creating an effective $\\Lambda$ system using a giant artificial atom. This thesis reviews the numerical techniques used to model these experiments.

•Jan 1, 2021•0 citations

Surface acoustic wave unidirectional transducers for quantum applications

Maria K. Ekström, Thomas Aref, Johan E. Runeson +3 more

The conversion efficiency of electric microwave signals into surface acoustic waves in different types of superconducting transducers is studied with the aim of quantum applications. We compare delay lines containing either conventional symmetric transducers (IDTs) or unidirectional transducers (UDTs) at 2.3 GHz and 10 mK. The UDT delay lines improve the insertion loss with 4.7 dB and a directivity of 22 dB is found for each UDT, indicating that 99.4% of the acoustic power goes in the desired direction. The power lost in the undesired direction accounts for more than 90% of the total loss in IDT delay lines, but only ∼3% of the total loss in the floating electrode unidirectional transducer delay lines.

arXiv:1611.06018•Applied Physics Letters•Feb 13, 2017•60 citations

Circuit quantum acoustodynamics with surface acoustic waves

Riccardo Manenti, Anton Frisk Kockum, Andrew D. Patterson +5 more

Abstract The experimental investigation of quantum devices incorporating mechanical resonators has opened up new frontiers in the study of quantum mechanics at a macroscopic level. It has recently been shown that surface acoustic waves (SAWs) can be piezoelectrically coupled to superconducting qubits, and confined in high-quality Fabry–Perot cavities in the quantum regime. Here we present measurements of a device in which a superconducting qubit is coupled to a SAW cavity, realising a surface acoustic version of cavity quantum electrodynamics. We use measurements of the AC Stark shift between the two systems to determine the coupling strength, which is in agreement with a theoretical model. This quantum acoustodynamics architecture may be used to develop new quantum acoustic devices in which quantum information is stored in trapped on-chip acoustic wavepackets, and manipulated in ways that are impossible with purely electromagnetic signals, due to the 10 5 times slower mechanical waves.

arXiv:1703.04495•Nature Communications•Oct 11, 2017•337 citations

Cavity-free vacuum-Rabi splitting in circuit quantum acoustodynamics

Andreas Ask, Maria Ekström, Per Delsing +1 more

Artificial atoms coupled to surface acoustic waves (SAWs) have played a crucial role in the recent development of circuit quantum acoustodynamics. In this paper, we have investigated the interaction of an artificial atom and SAWs beyond the weak-coupling regime, focusing on the role of the interdigital transducer (IDT) that enables the coupling. We find a parameter regime in which the IDT acts as a cavity for the atom, rather than an antenna. In other words, the atom forms its own cavity. Similar to an atom coupled to an explicit cavity, this regime is characterized by vacuum-Rabi splitting, as the atom hybridizes with the phononic vacuum inside the IDT. This hybridization is possible because of the interdigitated coupling, which has a large spatial extension, and the slow propagation speed of SAWs. We work out a criterion for entering this regime from a model based on standard circuit-quantization techniques, taking only material parameters as inputs. Most notably, we find this regime hard to avoid for an atom on top of a strong piezoelectric material, such as lithium niobate (${\mathrm{LiNbO}}_{3}$). The SAW-coupled atom on top of ${\mathrm{LiNbO}}_{3}$ can thus be regarded as an atom-cavity-bath system. On weaker piezoelectric materials, the number of IDT electrodes needs to be large in order to reach this regime.

arXiv:1811.09421•Physical Review A•Jan 22, 2019•37 citations
One of the most fundamental phenomena occurring in nature is the interaction between single atoms and electromagnetic fields. This is studied in quantum optics to probe the quantum nature of the system. In appended Paper I, we demonstrated that an artificial atom can couple to propagating sound, which is the acoustic analogue of quantum optics. This thesis covers experiments where surface acoustic waves (SAWs) are used in superconducting circuits at gigahertz frequencies with the aim for quantum applications.Since SAWs are mechanical vibrations that propagate on the surface of solids and dissipate little power, they can propagate freely over long distances before and after they interact with the artificial atom. Their five order of magnitude slower speed and smaller wavelength than light at gigahertz frequencies, open up for exploring new regimes of quantum physics. In addition, the coupling between the artificial atom and the SAWs is promising for reaching ultrastrong coupling limits, which is hard in other types of systems. Many of the future applications are discussed in appended Paper II, together with a more detailed description of the theory and fabrication of the devices.Although the possibilities are many, a variety of potential experiments would benefit from higher conversion efficiency between electric signals and SAWs. Therefore, improvements of this conversion are studied in appended Paper III, making use of the many advances in classical SAW devices. More specifically, the conversion of unidirectional transducers (UDTs) on lithium niobate is studied and compared to symmetric interdigital transducers (IDTs). The results show that 99.4 % of the acoustic power can be focused in the desired direction and that the conversion between electric signals and SAWs is greatly improved by using UDTs, eliminating the largest contribution to loss of the IDTs. However, there is a trade-off between conversion efficiency and bandwidth. This knowledge allows us to better tailor potential quantum experiments based on SAWs, possibly towards measuring quantum sound.
Surface acoustic waves (SAWs) are mechanical vibrations that propagate on the surface of solids while dissipating little power, consequently enabling them to propagate freely over long distances. The speed and wavelength of SAWs are reduced a five order of magnitude compared to when light is used as a carrier at gigahertz frequencies. The unique properties of SAWs combined with the possibility to let them interact with artificial atoms, discovered and shown for the very first time in appended Paper I of this thesis, open up for exploration of new regimes of quantum physics. The appended Paper II is a book chapter providing an overview of many of the new areas of research, as well as going into depth of the method and significance of the results ofthe appended Paper I.The essential interaction between artificial atoms and SAWs was further investigated by using Autler-Townes splitting to achieve fast control of the interactions. The appended Paper IV, shows a transmitted field extinction of 80 %, and provides proof of concept for a SAW router in the quantum regime. In addition, due to the artificial atom's highly frequency dependent coupling to SAWs, electromagnetically induced transparency (EIT) could be observed in the appended Paper V. Furthermore, the EIT region was distinguished from the Autler-Townes splitting region by a threshold in the applied power. The results produce parallel findings to quantum optics, but are perhaps best described as part of a different field, quantum acoustics.Among the many possible areas of research emerging as an outcome of this work, a variety of potential quantum experiments would benefit greatly from a higher conversion efficiency between electric signals and SAWs. Due to this, focus was put on improving this conversion efficiency by studying superconducting unidirectional transducers (UDTs), making use of advances in classical SAW devices. The appended Paper III shows that 99.4~\\% of the acoustic power can be focused in a desired direction and that the conversion between electric signals and SAWs is greatly improved by using UDTs, thereby eliminating the largest source of loss of symmetric inter-digital transducers. There is, however, a trade-off between conversion efficiency and bandwidth. This finding allows tailoring of quantum experiments based on SAWs that may pave the way towards measuring quantum sound.
The past 20 years has seen rapid developments in circuit quantum electrodynamics, where superconducting qubits and resonators are used to control and study quantum light-matter interaction at a fundamental level. The development of this field is strongly influenced by quantum information science and the prospect of realizing quantum computation, but also opens up opportunities for combinations of different physical systems and research areas. Superconducting circuits in the microwave domain offer a versatile platform for interfacing with other quantum systems thanks to strong nonlinearities and zero-point fluctuations, as well as flexibility in design and fabrication. Hybrid quantum systems based on circuit quantum electrodynamics could enable novel functionalities by exploiting the strengths of the individual components.This thesis covers experiments coupling superconducting circuits to surface acoustic waves (SAWs), mechanical waves propagating along the surface of a solid. Strong coupling can be engineered using the piezoelectric properties of GaAs substrates, and our experiments exploit this to investigate phenomena in quantum field-matter interaction. A key property of surface acoustic waves is the slow propagation speed, typically five orders of magnitude slower than light in vacuum, and the associated short wavelength. This enables the giant atom regime where the artificial atom in the form of a superconducting circuit is large compared to the wavelength of interacting SAW radiation, a condition which is difficult to realize in other systems. Experiments described in this thesis use these properties to demonstrate electromagnetically induced transparency for a mechanical mode, as well as non-Markovian interactions between an artificial giant atom and the SAW field. When the SAW field is confined to a resonant cavity, the short wavelength allows multimode spectra suitable for interacting with a frequency comb. We use a multimode SAW resonator to characterize the ensemble of microscopic two-level system defects with a two-tone spectroscopy approach. Finally, we introduce a hybrid superconducting-SAW resonator with applications in quantum information processing in mind. Experiments with this device demonstrate entanglement of SAW modes, and show promising results on the way to engineer cluster states for quantum computation in continuous variables.
The study of light-matter interaction in superconducting quantum circuits has seen remarkable progress over the last 202020 years. By engineering artificial atoms, novel quantum phenomena have been demonstrated, and old ideas have come into a new light. Beyond their application to basic science, the prospect of implementing large-scale quantum information processing with superconducting circuits has fueled a rapid development of surrounding technologies, with ever-increasing control over their behavior as a result. The field's success stems primarily from the flexible design and strong non-linearity of the artificial atom, whose coherent interaction with both electrical and mechanical degrees of freedom has opened many doors for science. This thesis deals with the interaction between artificial atoms and quantum fields in one-dimensional waveguides. The waveguide represents a one-dimensional environment for the atom, which we use to study the properties of open quantum systems. All quantum systems are, in fact, open, and interactions between the system and its environment lead inevitably to a loss of energy and quantum coherence. A continuous loss of information into the environment is called a Markovian process. The work contained in this thesis indicates that deviations from a Markovian process can be detected in the steady state of driven systems. This could simplify the detection of non-Markovianity in open quantum systems, as no information about the system's transient dynamics would be necessary.Specifically, this thesis considers both electromagnetic fields in microwave transmission lines and acoustic fields in the form of surface acoustic waves (SAWs) traveling on the surface of solids. The recent realization of artificial atoms interacting with acoustic waves has opened up a new research field called quantum acoustics. We have built a model of the interaction between atoms and SAWs that predicts the existence of a new regime where the atom forms its own cavity. Additionally, we have considered synthesizing electromagnetically induced transparency, a quantum optics phenomena in opaque media where the absorption of photons is canceled, in waveguides using multiple closely spaced two-level systems. Some of the work in this thesis represents experimental work done in collaboration. In the first experiment, we studied the routing of acoustic waves at the quantum level. In the other experiment, we demonstrated electromagnetically induced transparency by creating an effective Lambda\\LambdaLambda system using a giant artificial atom. This thesis reviews the numerical techniques used to model these experiments.
The conversion efficiency of electric microwave signals into surface acoustic waves in different types of superconducting transducers is studied with the aim of quantum applications. We compare delay lines containing either conventional symmetric transducers (IDTs) or unidirectional transducers (UDTs) at 2.3 GHz and 10 mK. The UDT delay lines improve the insertion loss with 4.7 dB and a directivity of 22 dB is found for each UDT, indicating that 99.4% of the acoustic power goes in the desired direction. The power lost in the undesired direction accounts for more than 90% of the total loss in IDT delay lines, but only ∼3% of the total loss in the floating electrode unidirectional transducer delay lines.
Abstract The experimental investigation of quantum devices incorporating mechanical resonators has opened up new frontiers in the study of quantum mechanics at a macroscopic level. It has recently been shown that surface acoustic waves (SAWs) can be piezoelectrically coupled to superconducting qubits, and confined in high-quality Fabry–Perot cavities in the quantum regime. Here we present measurements of a device in which a superconducting qubit is coupled to a SAW cavity, realising a surface acoustic version of cavity quantum electrodynamics. We use measurements of the AC Stark shift between the two systems to determine the coupling strength, which is in agreement with a theoretical model. This quantum acoustodynamics architecture may be used to develop new quantum acoustic devices in which quantum information is stored in trapped on-chip acoustic wavepackets, and manipulated in ways that are impossible with purely electromagnetic signals, due to the 10 5 times slower mechanical waves.
Artificial atoms coupled to surface acoustic waves (SAWs) have played a crucial role in the recent development of circuit quantum acoustodynamics. In this paper, we have investigated the interaction of an artificial atom and SAWs beyond the weak-coupling regime, focusing on the role of the interdigital transducer (IDT) that enables the coupling. We find a parameter regime in which the IDT acts as a cavity for the atom, rather than an antenna. In other words, the atom forms its own cavity. Similar to an atom coupled to an explicit cavity, this regime is characterized by vacuum-Rabi splitting, as the atom hybridizes with the phononic vacuum inside the IDT. This hybridization is possible because of the interdigitated coupling, which has a large spatial extension, and the slow propagation speed of SAWs. We work out a criterion for entering this regime from a model based on standard circuit-quantization techniques, taking only material parameters as inputs. Most notably, we find this regime hard to avoid for an atom on top of a strong piezoelectric material, such as lithium niobate (LiNbO3{\mathrm{LiNbO}}_{3}LiNbO3​). The SAW-coupled atom on top of LiNbO3{\mathrm{LiNbO}}_{3}LiNbO3​ can thus be regarded as an atom-cavity-bath system. On weaker piezoelectric materials, the number of IDT electrodes needs to be large in order to reach this regime.