Summary form only given. We have developed an apparatus for producing BEC that allows for very high confinements with very low power. Our system is based on the use of an iron core electromagnet. This allows us to achieve BEC in high bias fields, or with very high aspect ratios. The latest developments of our electromagnet design should allow us to realize quasi-1D or 1D condensates. We used different evaporation techniques (3-RF-knives, hyperfine transition, sympathetic cooling) to overcome the interruption of evaporative cooling in high bias fields for the F=2, m=2 ground state. This allows for multiple independent condensates that can be studied with an output RF coupler. We realized an atom laser for atoms initially in F=1, m=-1 and coupled it into a magnetic atomic cavity by transferring the atoms into the F=2, m=0 state (a trapping state at our bias field). The patterns observed in such a cavity result from the beat note between several cavity modes and are a signature of the high coherence of the initial atom layer.
Summary form only given. We have developed an apparatus for producing BEC that allows for very high confinements with very low power. Our system is based on the use of an iron core electromagnet. This allows us to achieve BEC in high bias fields, or with very high aspect ratios. The latest developments of our electromagnet design should allow us to realize quasi-1D or 1D condensates. We used different evaporation techniques (3-RF-knives, hyperfine transition, sympathetic cooling) to overcome the interruption of evaporative cooling in high bias fields for the F=2, m=2 ground state. This allows for multiple independent condensates that can be studied with an output RF coupler. We realized an atom laser for atoms initially in F=1, m=-1 and coupled it into a magnetic atomic cavity by transferring the atoms into the F=2, m=0 state (a trapping state at our bias field). The patterns observed in such a cavity result from the beat note between several cavity modes and are a signature of the high coherence of the initial atom layer.
Summary form only given. Bose-Einstein condensates (BEC) are generally produced by evaporative cooling of laser cooled atomic samples in magnetic traps. Though magnetic traps are indispensable for the production of a BEC, they pose restrictions on the possible studies with a BEC. Previous experiments of our group have demonstrated that it is possible to trap a BEC in the circular focus of a far-detuned infrared laser beam. This first realization of an optical dipole trap (ODT) for BEC was used to prepare and investigate spinor condensates of Na atoms in the F=1 hyperfine manifold. However, the initial peak density in this ODT after loading from the magnetic trap reached 10/sup 15/ atoms/cm/sup 3/, leading to rapid losses due to three-body collisions. To realize an ODT capable of storing large condensates for a long time, we have used a laser beam with an elliptical beam profile. The optical trap is loaded by superimposing the light field onto the magnetic trap and then slowly turning off the magnetic fields. The transfer efficiency is close to 100%, and thus more than 10/sup 7/ Bose-condensed atoms can be loaded into the ODT.
In a Bose-Einstein Condensate (BEC), due to extremely low temperatures, wave functions of all particles in the system overlap and form a single macroscopic wavefunction. This brings quantum mechanical effects to the macroscopic scale and allows us to better understand known quantum mechanical laws and effects, as well as develop new ones. In addition to being of fundamental scientific interest, BEC can serve in practical applications, such as quantum metrology, atomic interferometry, and quantum information and communication. Here we describe our approach for producing BECs in 87Rb. To create atomic flux towards our science chamber, a 2-dimensional magneto-optical trap (2D-MOT) with push beam is used. The initial atomic cloud is formed in 15s by 3D-MOT and consists of 1e9 atoms at 500uK. After the MOT, atoms are cooled with optical molasses to 50uK and transferred to a quadrupole magnetic trap, where radio-frequency (RF) induced evaporation is performed, which lowers temperature to 10uK. After RF evaporation, the atomic cloud is transferred to a crossed beams optical dipole trap (ODT). During evaporation in the ODT, the temperature is reduced below the critical temperature Tc=286nK, where condensation starts, and eventually reaches 40nK. As a result, a quasi-pure BEC with 1e5 87Rb atoms is formed. The complete sequence from the MOT loading to the BEC formation takes about 30s. Observations of the inversion of the aspect ratio of the cloud during free expansion and a bimodal velocity distribution prove quantum degeneracy. Presented in this thesis are the necessary background for understanding the experimental steps, a description of the schemes and technical details of our setup, and a characterizations of all the experimental steps.
We have developed a compact partially ferromagnetic electromagnet to produce an Ioffe-Pritchard trap for neutral atoms. Our structure permits strong magnetic confinement with low power consumption. Compared to the previous iron-core electromagnet [B. Desruelle, V. Boyer, P. Bouyer, G. Birkl, M. Lécrivain, F. Alves, C. Westbrook, and A. Aspect, Eur. Phys. J. D 1, 255 (1998)], it allows for easy compensation of remnant fields and very high stability, along with cost-effective realization and compactness. We describe and characterize our apparatus and demonstrate trapping and cooling of Rb87 atoms to quantum degeneracy. Pure Bose-Einstein condensates containing 106 atoms are routinely realized on a half-minute cycle. In addition we test the stability of the magnetic trap by producing atom lasers.
In 1925, Einstein predicted the condensation of bosons into the ground state of the system for low (but finite) temperatures. Several phenomena, including superfluidity and superconductivity have been associated with Bose-Einstein condensation, but these systems interact strongly with their environment and pure Bose-Einstein condensation could not be established. It took 70 years, in which time the laser was discovered, and laser cooling techniques to manipulate atoms in a dilute atomic gas, before Bose-Einstein condensation in dilute atomic gases could be demonstrated in 1995. In the first condensation experiments, BECs were created in a magnetic trap. Since in a magnetic trap not all mF states of the atom can be trapped simultaneously, thereby limiting the number of experiments that can be done, other ways of trapping and generating BECs were sought and found. In 2001, the first all-optical BEC was made, where the dipole force was used to trap atoms in the crossing of two far red detuned laser beams. In an optical dipole trap not only atoms in different internal states can be trapped, but also different atomic species simultaneously. In this thesis, the formation of an all-optical Bose-Einstein condensate with rubidium atoms is presented. Conventional all-optical BECs are usually created in high power CO2 laser dipole traps, or have complicated laser cooling schemes and complex dipole trap setups. In our simple and straightforward setup, we load rubidium atoms from a magneto-optical trap into a crossed optical dipole trap created by a single frequency Yb:YAG laser with a wavelength at 1030 nm. The small wavelength allows for a small diffraction limit, and permits us to use standard optical materials, thus making the experimental setup cost effective. Other attempts to achieve Bose-Einstein condensation in a multi-mode (frequency) fiber laser at 1064 nm failed, because the atom loss was quite high. It is assumed that the multi-mode character of the fiber laser induces Raman transitions in rubidium atoms, thereby heating them. We can trap about ∼ 5E7 atoms in a single beam dipole trap out of ∼ 5E9 atoms trapped in theMOT, and ∼ 350,000 atoms can be trapped in a crossed beam dipole trap due to the smaller trap volume. 70% of the atoms in the dipole trap is optically pumped into one mF state. Quantum degeneracy is reached by evaporatively cooling the atoms in the crossed dipole trap by ramping down the laser power with three linear ramps. We can independently change the power of each beam by an AOM. This allows us to use one beam as an atom waveguide for future experiments. After evaporation, we typically have about 10,000 atoms at a temperature below the critical temperature. We have proved Bose-Einstein condensation by using the anisotropic expansion of a quantum degenerate gas trapped in an anisotropic potential. The aspect ratio of our atom cloud changed during a time of flight from 0.7 to 1.2 in 10 ms, thus proving that we have reached quantum degeneracy. We have about 5,000 condensed atoms in our optical dipole trap at a temperature less than 100 nK. The remaining atoms are thermal. Bose-Einstein condensation is obtained within 8 s, and we can repeat the experiment every 30 s. It should be mentioned that the Bose-Einstein experiment was moved from the ”Leibniz Universität Hannover” to the ”Technische Universität Darmstadt”, and had to be completely rebuilt. All-optical Bose-Einstein condensation was reached within one year after the move. Our Bose-Einstein condensation setup presents an ideal starting point for using our condensates in combination with miniaturized atom optical setups based on our novel microfabricated optical elements. With our microlenses, we can create a number of possible dipole trap configurations, such as the dipole trap array or the cylindrical microlens array. Using microlenses in miniaturized atom optical setups opens a completely new field of coherent atom optics. Also because the tight confinement of the microtraps allows us to load a 3D BEC, a 1D BEC, or a Tonks-Girardeau gas in the micropotentials depending on the density.
The long term aim of the work is to study non-equilibrium and symmetry-breaking phenomena for a Bose-Einstein condensate in time-dependent optical traps. The work presented in this thesis is mostly devoted to the design, construction and testing of the apparatus, in which condensation was successfully achieved. The first part of this thesis describes the design and construction of a hybrid setup for the production of a Bose-Einstein condensate (BEC) of 87 Rb in the |F = 2, m F = +2 > state. The vacuum system is composed of a first chamber, where a low-velocity intense source (LVIS) of atoms is produced to provide a pre-cooled atomic beam to the science chamber, where the magneto-optical trap (MOT) is produced, trapping more than 3 x 10 8 atoms at a temperature of roughly 400 μK. Forced radio- frequency evaporation is performed in a quadrupole magnetic trap and the atoms are transferred to a hybrid far-detuned optical trap in a crossed-beams configuration; evaporation in the optical potential leads to reliable production of a BEC every 50 s, composed of 10^5 atoms at a temperature of 10-30 nK. To ensure fine control on the optical potential depth and high intensity and pointing stability, a stabilisation system has been developed and characterised. The second part of this thesis describes the realisation of a 1D optical lattice, produced by two phase-locked laser beams emitting at 780 nm, with a red detuning of approximately 3.5 GHz, in counter-propagating configuration. Oscillating forces obtained by phase-modulating the optical potential are applied.
Summary form only given. Recently, we have created a Bose condensate of /sup 87/Rb atoms directly in an optical trap formed by tightly focused laser beams. Following initial loading from a laser cooled gas, evaporative cooling through the BEC transition is achieved by simply lowering the depth of the optical trap. Our success is due in part to a high initial phase space density realized in the loading of our optical dipole trap and in part to the tight confinement of the atoms that permits rapid evaporative cooling to the BEC transition in 2 s.