It is a characteristic of wisdom not to do desperate things. Henry David Thoreau Summary The essence of a mean-field method is to replace an interacting many-body problem with a set of independent-particle problems having an effective potential. It can be chosen either as an approximation for effects of interactions in an average sense or as an auxiliary system that can reproduce selected properties of an interacting system. The effective potential can have an explicit dependence on an order parameter for a system with a broken symmetry such as a ferro- or antiferromagnet. Mean-field techniques are vital parts of many-body theory: the starting points for practical many-body calculations and often the basis for interpreting the results. This chapter provides a summary of the Hartree–Fock approximation, the Weiss mean field, and density functional theory that have significant roles in the methods described in this book. Mean-field methods denote approaches in which the interacting many-body system is treated as a set of non-interacting particles in a self-consistent field that takes into account some effects of interactions in some way. In the literature such methods are often called “one-electron”; however, in this book we use “non-interacting” or “independent-particle” to refer to mean-field concepts and approaches. We reserve the terms “one-electron” or “one-body” to denote quantities that involve quantum mechanical operators acting independently on each body in a many-body system. Mean-field approaches are relevant for the study of interacting, correlated electrons because they lead to approximate formulations that can be solved more easily than more sophisticated approaches; when judiciously chosen, mean-field solutions can yield useful, physically meaningful results, and they can provide the basis and conceptual structure for investigating the effects of correlation. The particles that are the “bodies” in a many-body theory can be the original particles with their bare masses and interactions, or, most often, they may be the solutions of a set of mean-field equations chosen to facilitate the solution of the many-body problem. A large part of many-body theory in condensed matter involves the choice of the most appropriate independent particles. Hence, it is essential to define clearly the particles that are created and annihilated by the operators and in which the many-body theory is formulated.
It is a characteristic of wisdom not to do desperate things. Henry David Thoreau Summary The essence of a mean-field method is to replace an interacting many-body problem with a set of independent-particle problems having an effective potential. It can be chosen either as an approximation for effects of interactions in an average sense or as an auxiliary system that can reproduce selected properties of an interacting system. The effective potential can have an explicit dependence on an order parameter for a system with a broken symmetry such as a ferro- or antiferromagnet. Mean-field techniques are vital parts of many-body theory: the starting points for practical many-body calculations and often the basis for interpreting the results. This chapter provides a summary of the Hartree–Fock approximation, the Weiss mean field, and density functional theory that have significant roles in the methods described in this book. Mean-field methods denote approaches in which the interacting many-body system is treated as a set of non-interacting particles in a self-consistent field that takes into account some effects of interactions in some way. In the literature such methods are often called “one-electron”; however, in this book we use “non-interacting” or “independent-particle” to refer to mean-field concepts and approaches. We reserve the terms “one-electron” or “one-body” to denote quantities that involve quantum mechanical operators acting independently on each body in a many-body system. Mean-field approaches are relevant for the study of interacting, correlated electrons because they lead to approximate formulations that can be solved more easily than more sophisticated approaches; when judiciously chosen, mean-field solutions can yield useful, physically meaningful results, and they can provide the basis and conceptual structure for investigating the effects of correlation. The particles that are the “bodies” in a many-body theory can be the original particles with their bare masses and interactions, or, most often, they may be the solutions of a set of mean-field equations chosen to facilitate the solution of the many-body problem. A large part of many-body theory in condensed matter involves the choice of the most appropriate independent particles. Hence, it is essential to define clearly the particles that are created and annihilated by the operators and in which the many-body theory is formulated.
The calculation of a wavefunction took about two afternoons, and five wavefunctions were calculated in the whole …. Wigner and Seitz, 1933 Summary In order to explain many important properties of materials and phenomena, it is necessary to go beyond independent-particle approximations and directly account for many-body effects that result from electronic interaction. The many-body problem is a major scientific challenge, but there has been great progress resulting from theoretical developments and advances in computation. This chapter is a short introduction to the interacting-electron problem, with some of the history that has led up to the concepts and methods described in this book. The many-body interacting-electron problem ranks among the most fascinating and fruitful areas of research in physics and chemistry. It has a rich history, starting from the early days of quantum mechanics and continuing with new intellectual challenges and opportunities. The vitality of electronic structure theory arises in large part from the close connection with experiment and applications. It is spurred on by new discoveries and advances in techniques that probe the behavior of electrons in depth. In turn, theoretical concepts and calculations can now make predictions that suggest new experiments, as well as provide quantitative information that is difficult or not yet possible to measure experimentally. This book is concerned with the effects of interactions between electrons beyond independent-particle approximations. Some phenomena cannot be explained by any independent-electron method, such as broadening and lifetime of excited states and two-particle bound states (excitons) that are crucial for optical properties of materials. There are many other examples, such as the van derWaals interaction between neutral molecules that arises from the dipole–induced dipole interaction. This force, which is entirely due to correlation between electrons, is an essential mechanism determining the functions of biological systems. Other properties, such as thermodynamically stable magnetic phases, would not exist if there were no interactions between electrons; even though mean-field approximations can describe average effects, they do not account for fluctuations around the average. Ground-state properties, such as the equilibrium structures of molecules and solids, can be described by density functional theory (DFT) and the Kohn–Sham independent-particle equations. However, present approximations are often not sufficient, and for many properties the equations, when used in a straightforward way, do not give a proper description, even in principle.
Think globally, act locally. Summary Dynamical mean-field theory is designed to treat systems with local effective interactions that are strong compared with the independent-particle terms that lead to delocalized band-like states. Interactions are taken into account by a many-body calculation for an auxiliary system, a site embedded in a dynamical mean field, that is chosen to best represent the coupling to the rest of the crystal. The methods are constructed to be exact in three limits: interacting electrons on isolated sites, a lattice with no interactions, and the limit of infinite dimensions d → ∞ where mean-field theory is exact. This chapter is devoted to the general formulation, the single-site approximation where the calculation of the self-energy is mapped onto a self-consistent quantum impurity problem, and instructive examples for the Hubbard model on a d → ∞ Bethe lattice. Further developments and applications are the topics of Chs. 17–21. One of the most rewarding features of condensed matter theory is the ability to address difficult problems from different points of view. The preceding Chs. 9–15 present an approach based on perturbation expansions in the Coulomb interaction. In particular, the GW approximation for the self-energy has proven to be extremely successful in describing electronic spectra of many materials, as described in Ch. 13. The methods can be applied to the ordered states of materials with d and f states, for example, ferromagnetic Ni and anti-ferromagnetic NiO, as described in Secs. 13.4 and 20.7. However, the GW and related approximations have difficulties in treating cases with degenerate or nearly degenerate states and low-energy excitations. Present-day methods do not describe phenomena like the fluctuations of local moments in a ferromagnetic material above the Curie temperature or the insulating character of NiO in the paramagnetic phase; more generally, they have difficulty describing strong correlation. The topic of this chapter and Chs. 17–21 is dynamical mean-field theory, which is also a Green's function method in which the key quantity is the self-energy. However, it is designed to treat strong interactions for electrons in localized atomic-like states, such as the d and f states in transition metals, lanthanide and actinide elements and compounds.
This thesis is about the derivation of effective mean field equations and their next-order corrections starting from nonrelativistic many-body quantum theory. Mean field equations provide an approximate ansatz for the description of interacting many-particle systems. In this ansatz the interaction between the particles is replaced by a self-consistent external potential leading to an effective one-body description of the many-particle system. Next-order corrections provide an approximation which goes one step further and tries to capture also subleading effects that are not resolved by the mean field ansatz. We present mathematical proofs for the validity of such effective theories for different models that are motivated, e.g., from the theory of ultracold atoms (the bosonic Hartree equation and the corresponding Bogoliubov theory) and from plasma physics (the motion of a tracer particle through a degenerate and dense electron gas). Starting from a many-body Schrödinger equation, our goal is to show that the solutions converge in a particular limit to the solutions to an effective mean field equation and its next-order corrections. After a short introduction and a summary in Chapter one, we present the main part of this work in three self-contained chapters. In Chapter two we analyze the dynamics of a large number N of nonrelativistic bosons in the weak coupling limit, i.e., for a coupling constant g_N=1/N. It is well known that in the limit of infinite particle number, the Hartree equation emerges as an effective one-particle theory of the Bose gas. This is closely related to the remarkable physical phenomenon of Bose-Einstein condensation at low temperature, namely that the majority of particles in a Bose gas occupies the same copy of a single one-particle quantum state. Our emphasis lies in the description of the few particles that fluctuate around the Bose-Einstein condensate. We show convergence of the fully interacting dynamics to an auxiliary time evolution in the norm of the N-particle space. This result allows us to prove several other assertions. Among other things, it is used to derive the Hartree equation with optimal speed of convergence 1/N for initial states that are close to ground states of interacting systems and also to prove convergence of the N-particle solution towards a time evolution obtained from the Bogoliubov Hamiltonian on Fock space. Chapter three is about the low energy properties of the weakly interacting homogeneous Bose gas. Here, we derive a novel estimate for low energy eigenfunctions stating that the probability for finding l particles out of their total number N not in the condensate is exponentially small in the number l. Using this bound, we then prove that the ground state wave function of the microscopic model satisfies certain quasifree type properties. The exponential decay is moreover used to provide an alternative proof for the validity of Bogoliubov's approximation for the low-lying energy eigenvalues. Bogoliubov theory states that the excitation energies of the Bose gas are given by excitations of free quasiparticles obeying an effective energy-momentum dispersion relation which is linear for small momentum. The linearity of the effective dispersion relation is an essential ingredient for the explanation of the superfluid character of the Bose gas. In Chapter four we study the time evolution of a single particle coupled through a pair potential to a dense and homogeneous ideal Fermi gas in two spatial dimensions. This type of model is well known in plasma physics where it is used to describe the energy loss of ions moving through a dense and degenerate electron gas. We analyze the model for a coupling parameter g=1 and prove closeness of the time evolution to an effective dynamics for large densities of the gas and for long time scales of the order of some power of the density. The effective dynamics is generated by the free Hamiltonian with a large but constant energy shift. To leading order, this energy shift is given by the spatially homogeneous mean field potential produced by the gas particles, whereas at next-to-leading order, one has to consider an additional correction to the mean field energy which is due to so-called recollision processes.
The mean-field approximation based on effective interactions or density functionals plays a pivotal role in the description of finite quantum many-body systems that are too large to be treated by ab initio methods. Some examples are strongly interacting medium and heavy mass atomic nuclei and mesoscopic condensed matter systems. In this approach, the linear Schrodinger equation for the exact many-body wave function is mapped onto a non-linear density-dependent one-body potential problem. This approximation, not only provides computationally very simple solutions even for systems with many particles, but due to the non-linearity, it also allows for obtaining solutions that break essential symmetries of the system, often connected with phase transitions. In this way, additional correlations are subsumed in the system. However, the mean-field approach suffers from the drawback that the corresponding wave functions do not have sharp quantum numbers and, therefore, many results cannot be compared directly with experimental data. In this article, we discuss general group-theory techniques to restore the broken symmetries, and provide detailed expressions on the restoration of translational, rotational, spin, isospin, parity and gauge symmetries, where the latter corresponds to the restoration of the particle number. In order to avoid the numerical complexity of exact projection techniques, various approximation methods available in the literature are examined. Applications of the projection methods are presented for simple nuclear models, realistic calculations in relatively small configuration spaces, nuclear energy density functional theory, as well as in other mesoscopic systems. We also discuss applications of projection techniques to quantum statistics in order to treat the averaging over restricted ensembles with fixed quantum numbers. Further, unresolved problems in the application of the symmetry restoration methods to the energy density functional theories are highlighted in the present work.
Real knowledge is to know the extent of one's ignorance. Confucius, 500 BCE Summary The topic of this chapter is a small selection of the vast array of experimentally observed phenomena chosen to exemplify crucial roles played by the electron– electron interaction. Examples in the present chapter bring out the effects of correlation in ground and excited states as well as in thermal equilibrium. These raise challenges for theory and quantitative many-body methods in treating interacting electrons, the topics of the following chapters. The title of this book is Interacting Electrons . Of course, there are no non-interacting electrons: in any system with more than one electron, the electron–electron interaction affects the energy and leads to correlation between the electrons. All first-principles theories deal with the electron–electron interaction in some way, but often they treat the electrons as independent fermions in a static mean-field potential that contains interaction effects approximately. As described in Ch. 4, the Hartree–Fock method is a variational approximation with a wavefunction for fermions that are uncorrelated, except for the requirement of antisymmetry. The Kohn–Sham approach to DFT defines an auxiliary system of independent fermions that is chosen to reproduce the ground-state density. It is exact in principle and remarkably successful in practice. However, many properties such as excitation energies are not supposed to be taken directly from the Kohn–Sham equations, even in principle. Various other methods attempt to incorporate some effect of correlation in the choice of the potential. This chapter is designed to highlight a few examples of experimentally observed phenomena that demonstrate qualitative consequences of electron–electron interactions beyond independent-particle approximations. Some examples illustrate effects that cannot be accounted for in any theory where electrons are considered as independent particles. Others are direct experimental measurements of correlation functions that would vanish if the electrons were independent. In yet other cases, a phenomenon can be explained in terms of independent particles in some effective potential, but it is deeply unsatisfying if one has to invent a different potential for every case, even for different properties in the same material. A satisfactory theory ultimately requires us to confront the problem of interacting, correlated electrons.
To avoid confusion, it is necessary to be quite explicit about what is assumed and what is to be proved. A. Klein, Phys. Rev. 121, 950 (1961) Summary The topic of this chapter is functionals that provide a concise formulation for thermodynamic quantities and Green's function methods in interacting many-body systems. Building upon the instructive examples of density functional theory and the Hartree– Fock approximation, functionals of the Green's function are developed to provide a framework for practical methods used extensively in many-body perturbation theory (Chs. 9–15), dynamical mean-field theory (Chs. 16–20), and their combination in Ch. 21. Functional concepts give a firm foundation for those methods, for example, they give the conditions for approximations to obey conservation laws. Additional background and specific aspects are in App. H. Many physical quantities can be expressed as functionals , i.e., they depend on an entire function.1 For example, in the quantum variational method to determine a wavefunction, the total energy of a system of many electrons is a functional of a many-body trial wavefunction ( r 1 , r 2 , …): it is the expectation value of the hamiltonian. At the variational minimum, assuming the trial wavefunction is completely flexible, one finds the many-body Schrödinger equation for the ground state. Many of the properties we are interested in are, formally, simple functionals of the ground- or excited-state wavefunctions. In the search for feasible ways to calculate properties such as excitation spectra, we are led to different types of functional. The idea is to deal only with a physical, measurable quantity Q of interest and a variational functional E [ Q ] of this quantity. The variational character of E allows one to derive equations that determine Q 0 , the value of Q for the system in a desired state, typically the ground state or equilibrium state at T ≠ 0. Other properties should be different functionals F m [ Q ] that can then be evaluated at Q = Q 0 . This strategy is outlined in Fig. 8.1. To appreciate the power of such approaches, one can consider the impact of density functional theory, which is formulated as a functional of the density n ( r ) of electrons; it is defined for a range of densities and the variational minimum for the energy functional E [ n ] leads to equations to determine the actual ground-state density n 0 ( r ) and total energy E 0 .