Accurate control and addressability of quantum devices will come with the promise of improvement in a wide variety of theoretical and applied fields, such as chemistry, condensed matter physics, theoretical computer science, foundational physics, communications, metrology and others. Decoherence of quantum states and the loss of quantum systems have adverse effects and deter a satisfactory usage of quantum devices. This is the main problem to be overcome, which is the goal of quantum fault tolerance. In this thesis we present a series of works that contribute to some of the fields mentioned above, in the direction of fighting decoherence and loss. These works fall in two categories: on one hand, we looked at computer architectures which can be used to combat errors, using techniques of quantum error correcting codes. In a first project we found decoherence and loss probability thresholds below which quantum computing is provably possible. We assumed a very particular error model tailored specially to quantum dots as single photon sources and linear optics. Subsequently we looked at the problem of loss, both of heralded and unheralded, and devised some ways to fight it. The framework under which this work was done was used to develop theory which is currently being tested in a quantum optics experimental group and will be reported in an article later this year. On the other hand, we studied how the error probability can be reduced at the physical level, thanks exclusively to the properties of the system in which information is stored, as opposed to making use of quantum codes. We looked at a particular superconducting circuit, which is potentially very well protected against some types of decoherence. In particular, we observed that the interaction with the environment become weaker for certain values of the circuit external parameters.
Accurate control and addressability of quantum devices will come with the promise of improvement in a wide variety of theoretical and applied fields, such as chemistry, condensed matter physics, theoretical computer science, foundational physics, communications, metrology and others. Decoherence of quantum states and the loss of quantum systems have adverse effects and deter a satisfactory usage of quantum devices. This is the main problem to be overcome, which is the goal of quantum fault tolerance. In this thesis we present a series of works that contribute to some of the fields mentioned above, in the direction of fighting decoherence and loss. These works fall in two categories: on one hand, we looked at computer architectures which can be used to combat errors, using techniques of quantum error correcting codes. In a first project we found decoherence and loss probability thresholds below which quantum computing is provably possible. We assumed a very particular error model tailored specially to quantum dots as single photon sources and linear optics. Subsequently we looked at the problem of loss, both of heralded and unheralded, and devised some ways to fight it. The framework under which this work was done was used to develop theory which is currently being tested in a quantum optics experimental group and will be reported in an article later this year. On the other hand, we studied how the error probability can be reduced at the physical level, thanks exclusively to the properties of the system in which information is stored, as opposed to making use of quantum codes. We looked at a particular superconducting circuit, which is potentially very well protected against some types of decoherence. In particular, we observed that the interaction with the environment become weaker for certain values of the circuit external parameters.
This thesis is concerned with certain theoretical problems that arise naturally in the context of fault-tolerant quantum computation. Fault-tolerance can be defined as the art of building reliable devices from unreliable components, and is of particular importance for quantum computers that aim to precisely control the dynamics of extremely sensitive quantum systems. A model of quantum computation is a specification of the basic building blocks by which a quantum computation is implemented. The best known model is the quantum circuit model, where computations are implemented by means of unitary quantum gates that are applied to two-level quantum systems known as qubits. In a physical implementation of a quantum circuit, the gates and qubits will inevitably be affected by noise. Fault-tolerant quantum circuits are designed to be resilient against the effects of this noise, provided that it is not too strong. Fault-tolerance in the quantum circuit model is well developed thanks to the theory of quantum error-correcting codes. These codes allow for the correction of small numbers of errors introduced by a variety of noise processes. In a fault-tolerant quantum circuit, qubits are replaced with encoded qubits, and quantum gates with encoded gates that are immediately followed by special quantum circuits for error correction. Provided the rate at which errors occur is below a constant threshold value, the accumulation of errors can be checked so that the correct output of the computation correctly determined. The threshold acts as both a measure of how good the design of a quantum circuit is, and also as a target for experimenters aiming to implement quantum circuits. Much current research in quantum computation is aimed at designing quantum circuits that increase the noise threshold, hopefully to the point where it becomes within the reach of experimenters. A fault-tolerant encoded quantum gate must limit the propagation of errors so that the code’s corrective capabilities are not overwhelmed. It is not so easy to design encoded gates that satisfy this property, and to date only a finite handful of such gates are known. In a faulttolerant quantum circuit, all quantum gates must be decomposed or compiled in terms of those that may be implemented fault-tolerantly. In the first part of this thesis, we present two results that may be applied to this problem of gate compilation. The first is a generic method based on the Solovay-Kitaev theorem that may be applied to all quantum gates, but is most effective for those that act on single qubits. We present the Solovay-Kitaev theorem in its simples known form as an algorithm, together with novel constructions that can be used to implement it. Following this we give a two specialized methods for two-qubit gate decomposition, based on the Cartan decomposition of the Lie group SU(4). The cluster-state model of computation is an alternative to the quantum circuit model, and makes use of quantum measurements and highly entangled cluster-states to implement a quantum computation. The fault-tolerant techniques developed for quantum circuits are not immediately applicable in this model, so in order for it to be a realistic candidate for performing computations we prove that such techniques are possible. In the second part of the thesis we prove that constant fault-tolerance thresholds may be achieved in the cluster-state model, and in particular in an adaption to an optical implementation. Following this we design a complete error correction scheme for optical cluster-state computation, and numerically determine the threshold of this model in the face of the dominant noise models likely to affect such an implementation.
Quantum computation has the potential to solve certain mathematical and physical problems faster than a classical computer. However, one of the key challenges to realizing a quantum computing device is controlling systematic errors and maintaining the coherence of the quantum state. In addition, once a scalable quantum computer is built, we must be able to fault-tolerantly communicate a quantum algorithm to the physical device. In this dissertation, we take several significant steps towards the realization of a quantum computer. We develop a framework for use with any proposed technology to map a quantum algorithm into fault-tolerant machine instructions. Within this framework, we combat errors and decoherence by introducing quantum error correction and fault tolerance into a quantum circuit. We analyze specific fault-tolerant circuitry on two general architectures, nonlocal and nearest-neighbor, to determine failure thresholds of the physical circuit components. These failure thresholds allow physicists to evaluate technology proposals. Our goal is to provide design tools, failure thresholds, and fault-tolerant constructions to combat the faultiness of quantum computation.
Quantumcomputation is the modern version of Schrödinger’s cat experiment. It is backed up in principle by the theory and thinking about it can make people equally uncomfortable and excited. Besides, its practical realization seems so extremely challenging that some people even doubt it is possible. On the other hand, we are nowadays much closer to realizing quantum computation and in addition, it has much more implications than Schrödinger’s original cat experiment. One of the major difficulties in realizing quantum computation is the inevitable presence of noise in realistic quantum devices which makes the direct realization of quantum computers impossible. In order to protect quantum information and quantum processes against noise, quantum error correction and fault-tolerance have been devised. Although the gap between experiments and the requirements of fault-tolerance is still daunting, the field of quantum error correction and fault-tolerance extends and influences architectural decisions from the hardware to the ideal quantum programs that we want to run. That is why it has the potential to make or break the practicality of quantum computation and a lot of research effort goes into this field. In this thesis we investigate and improve several aspects of fault-tolerant schemes and quantum error correction. We implement an experiment which validates on a small device the usefulness of fault-tolerance for quantum computation. We investigate the advantages of harnessing quantum continuous degrees of freedom present in the lab to protect discrete quantum information in a scalable way. We establish a framework to analyze the fault-tolerant properties of code deformation techniques which are versatile techniques to process quantum information protected by an error correcting code. We also present some novel code deformation techniques with the potential to increase reliability. Finally we define a new class of quantum error correcting codes, quantum pin codes, with built in capabilities for fault-tolerant quantum gates. We give some practical constructions and show some protocols with interesting parameters. The roads towards universal and fault-tolerant quantum computation are still steep but research efforts are pushing in the right directions.
Quantum computing exists at the intersection of mathematics, physics, chemistry, and engineering; the main goal of quantum computing is the creation of devices and algorithms which use the properties of quantum mechanics to store, manipulate and measure information. There exist many families of algorithms, which, using non-classical logical operations, can outperform traditional, classical algorithms in terms of memory and processing requirements. In addition, quantum computing devices are fundamentally smaller than classical processors and memory elements; since the physical models governing their performance are applicable on all scales, as opposed to classical logic elements, whose underlying principles rely on the macroscopic nature of the device in question. \n \nQuantum algorithms, for the most part, are predicated on a theory of resources. It is often assumed that quantum computers can be placed in a precise fiducial state prior to computation, and that logical operations are perfect, inducing no error on the system which they affect. These assumptions greatly simplify algorithmic design, but are fundamentally unrealistic. In order to justify their use, it is necessary to develop a framework for using a large number of imperfect devices to simulate the action of a perfect device, with some acceptable probability of failure. This is the study of fault-tolerant quantum computing. In order to pursue this study effectively, it is necessary to understand the fundamental nature of generic quantum states and operations, as well as the means by which one can correct quantum errors. Additionally, it is important to attempt to minimize the use of computational resources in achieving error reduction and fault-tolerant computing. \n \nThis thesis is concerned with three projects related to the use of error-prone quantum systems to transmit and manipulate information. The first of these is concerned with the use of imperfectly-prepared states in error-correction routines. Using optimal quantum error correction, we are able to deduce a method of partially protecting encoded quantum information against preparation errors prior to encoding, using no additional qubits. The second of these projects details the search for entangled states which can be used to transmit classical information over quantum channels at a rate superior to classical states. The third of these projects concerns the transcoding of data from one quantum code into another using few ancillary resources. The descriptions of these projects are preceded by a brief introduction to representations of quantum states and channels, for completeness. \n \nThree techniques of general interest are presented in appendices. The first is an introduction to, and a minor advance in the development of optimal error correction codes. The second is a more efficient means of calculating the action of a quantum channel on a given state, given that the channel acts non-trivially only on a subsystem, rather than the entire system. Finally, we include documentation on a software package developed to aid the search for quantum transcoding operations.
Quantum computing promises to revolutionize several scientific and technological domains through fundamentally new ways of processing information. Among its most compelling applications is digital quantum simulation, where quantum computers are used to replicate the behavior of other quantum systems. This could enable the study of problems that are otherwise intractable on classical computers, transforming fields such as quantum chemistry, condensed matter physics, and materials science. Despite this potential, realizations of practical quantum advantage for relevant problems are hindered by imperfections of current devices. This also affects quantum hardware based on superconducting circuits which is among the most advanced and scalable platforms. The envisaged long-term solution of fault-tolerant quantum computers that correct their own errors remains out of reach mainly due to the associated qubit number overhead. As a result, the field has developed strategies that combine quantum and classical resources, exploit hardware-native operations, and employ error mitigation techniques to extract meaningful results from noisy data. This doctoral thesis contributes to this broader effort by exploring methods for advancing quantum simulation across the full computational stack, including hardware-level innovations, refined techniques for noise modeling and error mitigation, and algorithmic improvements enabled by efficient measurement processing.
Quantum computing is an exciting field that promises great improvements to our ability to solve certain intractable classes of problem. Implementing a quantum computer will require a physical system in which quantum effects are strongly evident. Many different physical systems have been proposed for this task, including ion traps, quantum dots, neutral atoms and photons. This thesis focuses on optical implementations of a quantum computer, and specifically on single-photon designs, as opposed to those utilising coherent states. Photonic systems have shown a great deal of promise for quantum computing tasks since it was shown by Knill, Laflamme and Milburn (KLM) that scalable efficient quantum computing could be performed using only linear optical elements and measurement. This was made viable through the use of error-correcting codes. The work in this thesis covers the use of error-correcting codes in single-photon linear optics quantum computing (LOQC). The central feature of these schemes is the parity code introduced by KLM and used to overcome the gate errors that are inherent in this type of LOQC. First is a discussion of an improved scheme that incorporates the fusion gates used in Browne and Rudolph's cluster state proposal in order to simplify the encoding and gate procedures. This results in high-probability gates with a resource usage comparable to the cluster state schemes. The remainder of the thesis examines the application of further error correcting codes to handle other errors that may arise in any practical implementation of an optical quantum computer. The most significant type of error in any optical system is photon loss, and hence an extension of the parity code is presented that allows loss errors to be detected and corrected. Procedures for performing universal quantum computation whilst employing this encoding are also described. These enable the establishment of loss thresholds for parity-state based LOQC, revealing this code is capable of handling up to 10\% loss in all elements during general computation, or 17\% if it is used solely as an active memory. Although loss is the most common type of optical error, other types of error will also become an issue when attempting to produce large quantum computing systems. An analysis of the error thresholds and resource usage which can be expected when applying a general error correcting code such as the Steane code to this type of LOQC system is also presented. The error thresholds and resource requirements established are greater than those found for cat state optical quantum computing, but fall below those calculated for cluster states. However, the resource requirements of the scheme are significantly smaller than the cluster state requirements for an equivalent circuit. Finally, a new experiment is proposed, achievable with today's technology, for testing the loss-tolerant encoding described earlier. Expansions of the experiment that would demonstrate tolerance of actual experimental error are also discussed.