We propose an inner space perturbation theory (isPT) to replace the expensive iterative diagonalization in the standard density matrix renormalization group theory (DMRG). The retained reduced density matrix eigenstates are partitioned into the active and secondary space. The first-order wave function and the second- and third-order energies are easily computed by using one step Davidson iteration. Our formulation has several advantages including (i) keeping a balance between the efficiency and accuracy, (ii) capturing more entanglement with the same amount of computational time, (iii) recovery of the standard DMRG when all the basis states belong to the active space. Numerical examples for the polyacenes and periacene show that the efficiency gain is considerable and the accuracy loss due to the perturbation treatment is very small, when half of the total basis states belong to the active space. Moreover, the perturbation calculations converge in all our numerical examples.
We propose an inner space perturbation theory (isPT) to replace the expensive iterative diagonalization in the standard density matrix renormalization group theory (DMRG). The retained reduced density matrix eigenstates are partitioned into the active and secondary space. The first-order wave function and the second- and third-order energies are easily computed by using one step Davidson iteration. Our formulation has several advantages including (i) keeping a balance between the efficiency and accuracy, (ii) capturing more entanglement with the same amount of computational time, (iii) recovery of the standard DMRG when all the basis states belong to the active space. Numerical examples for the polyacenes and periacene show that the efficiency gain is considerable and the accuracy loss due to the perturbation treatment is very small, when half of the total basis states belong to the active space. Moreover, the perturbation calculations converge in all our numerical examples.
We describe a low cost alternative to the standard variational DMRG (density matrix renormalization group) algorithm that is analogous to the combination of the selected configuration interaction plus perturbation theory (SCI+PT). We denote the resulting method p-DMRG (perturbative DMRG) to distinguish it from the standard variational DMRG. p-DMRG is expected to be useful for systems with very large active spaces, for which variational DMRG becomes too expensive. Similar to SCI+PT, in p-DMRG, a zeroth-order wave function is first obtained by a standard DMRG calculation but with a small bond dimension. Then, the residual correlation is recovered by a second-order perturbative treatment. We discuss the choice of partitioning for perturbation theory, which is crucial for its accuracy and robustness. To circumvent the problem of a large bond dimension in the first-order wave function, we use a sum of matrix product states to expand the first-order wave function, yielding substantial savings in computational cost and memory. We also propose extrapolation schemes to reduce the errors in the zeroth- and first-order wave functions. Numerical results for Cr 2 with a (28e, 76o) active space and 1,3-butadiene with an (22e, 82o) active space reveal that p-DMRG provides ground state energies of a similar quality to variational DMRG with very large bond dimensions but at a significantly lower computational cost. This suggests that p-DMRG will be an efficient tool for benchmark studies in the future.
The density matrix renormalization group (DMRG) is one of the most powerful numerical methods available for many-body systems. It has been applied to solve many physical problems, including the calculation of ground states and dynamical properties. In this work, we develop a perturbation theory of the DMRG (PT-DMRG) to greatly increase its accuracy in an extremely simple and efficient way. Using the canonical matrix product state (MPS) representation for the ground state of the considered system, a set of orthogonal basis functions $\left\{|{\ensuremath{\psi}}_{i}\ensuremath{\rangle}\right\}$ is introduced to describe the perturbations to the ground state obtained by the conventional DMRG. The Schmidt numbers of the MPS that are beyond the bond dimension cutoff are used to define these perturbation terms. The perturbed Hamiltonian is then defined as ${\stackrel{\ifmmode \tilde{}\else \~{}\fi{}}{H}}_{ij}=\ensuremath{\langle}{\ensuremath{\psi}}_{i}|\stackrel{\ifmmode \hat{}\else \^{}\fi{}}{H}|{\ensuremath{\psi}}_{j}\ensuremath{\rangle}$; its ground state permits us to calculate physical observables with a considerably improved accuracy compared to the original DMRG results. We benchmark the second-order perturbation theory with the help of a one-dimensional Ising chain in a transverse field and the Heisenberg chain, where the precision of the DMRG is shown to be improved O(10) times. Furthermore, for moderate L the errors of the DMRG and PT-DMRG both scale linearly with ${L}^{\ensuremath{-}1}$ (with L being the length of the chain). The linear relation between the dimension cutoff of the DMRG and that of the PT-DMRG at the same precision shows a considerable improvement in efficiency, especially for large dimension cutoffs. In the thermodynamic limit we show that the errors of the PT-DMRG scale with $\sqrt{{L}^{\ensuremath{-}1}}$. Our work suggests an effective way to define the tangent space of the ground-state MPS, which may shed light on the properties beyond the ground state. This second-order PT-DMRG can be readily generalized to higher orders, as well as applied to models in higher dimensions.
We report an extension of our previous development that incorporated quantum-chemical density matrix renormalization group (DMRG) into the complete active space second-order perturbation theory (CASPT2) [Y. Kurashige and T. Yanai, J. Chem. Phys. 135, 094104 (2011)]. In the previous study, the combined theory, referred to as DMRG-CASPT2, was built upon the use of pseudo-canonical molecular orbitals (PCMOs) for one-electron basis. Within the PCMO basis, the construction of the four-particle reduced density matrix (4-RDM) using DMRG can be greatly facilitated because of simplicity in the multiplication of 4-RDM and diagonal Fock matrix in the CASPT2 equation. In this work, we develop an approach to use more suited orbital basis in DMRG-CASPT2 calculations, e.g., localized molecular orbitals, in order to extend the domain of applicability. Because the multiplication of 4-RDM and generalized Fock matrix is no longer simple in general orbitals, an approximation is made to it using the cumulant reconstruction neglecting higher-particle cumulants. Also, we present the details of the algorithm to compute 3-RDM of the DMRG wavefunction as an extension of the 2-RDM algorithm of Zgid et al. [J. Chem. Phys. 128, 144115 (2008)] and Chan et al. [J. Chem. Phys. 128, 144117 (2008)]. The performance of the extended DMRG-CASPT2 approach was examined for large-scale multireference systems, such as low-lying excited states of long-chain polyenes and isomerization potential of {[Cu(NH3)3]2O2}(2+).
We present two efficient and intruder-free methods for treating dynamic correlation on top of general multiconfiguration reference wave functions — including such as obtained by the density matrix renormalization group (DMRG) with large active spaces. The new methods are the second order variant of the recently proposed multireference linearized coupled cluster method (MRLCC) [Sharma, S.; Alavi, A. J. Chem. Phys. 2015, 143, 102815] and of N-electron valence perturbation theory (NEVPT2), with expected accuracies similar to MRCI+Q and (at least) CASPT2, respectively. Great efficiency gains are realized by representing the first order wave function with a combination of internal contraction (IC) and matrix product state perturbation theory (MPSPT). With this combination, only third order reduced density matrices (RDMs) are required. Thus, we obviate the need for calculating (or estimating) RDMs of fourth or higher order; these had so far posed a severe bottleneck for dynamic correlation treatments involving the large active spaces accessible to DMRG. Using several benchmark systems, including first and second row containing small molecules, Cr 2, pentacene, and oxo-Mn(Salen), we show that active spaces containing at least 30 orbitals can be treated using this method. On a single node, MRLCC2 and NEVPT2 calculations can be performed with over 550 and 1100 virtual orbitals, respectively. We also critically examine the errors incurred due to the three sources of errors introduced in the present implementation – calculating second order instead of third order energy corrections, use of internal contraction, and approximations made in the reference wave function due to DMRG.
We present a second-order perturbation theory based on a density matrix renormalization group self-consistent field (DMRG-SCF) reference function. The method reproduces the solution of the complete active space with second-order perturbation theory (CASPT2) when the DMRG reference function is represented by a sufficiently large number of renormalized many-body basis, thereby being named DMRG-CASPT2 method. The DMRG-SCF is able to describe non-dynamical correlation with large active space that is insurmountable to the conventional CASSCF method, while the second-order perturbation theory provides an efficient description of dynamical correlation effects. The capability of our implementation is demonstrated for an application to the potential energy curve of the chromium dimer, which is one of the most demanding multireference systems that require best electronic structure treatment for non-dynamical and dynamical correlation as well as large basis sets. The DMRG-CASPT2/cc-pwCV5Z calculations were performed with a large (3d double-shell) active space consisting of 28 orbitals. Our approach using large-size DMRG reference addressed the problems of why the dissociation energy is largely overestimated by CASPT2 with the small active space consisting of 12 orbitals (3d4s), and also is oversensitive to the choice of the zeroth-order Hamiltonian.
The complete active space second order perturbation theory (CASPT2) can be extended to larger active spaces by using the density matrix renormalization group (DMRG) as solver. Two variants are commonly used: the costly DMRG-CASPT2 with exact 4-particle reduced density matrix (4-RDM) and the cheaper DMRG-cu(4)-CASPT2 in which the 4-cumulant is discarded. To assess the accuracy and limitations of the latter variant DMRG-cu(4)-CASPT2 we study the spin state energetics of iron porphyrin Fe(P) and its model compound FeL2, a model for the active center of NiFe hydrogenase, and manganese-oxo porphyrin MnO(P)(+); a series of excited states of chromium hexacarbonyl Cr(CO)6; and the interconversion of two Cu2O2(2+) isomers. Our results clearly show that PT2 on top of DMRG is essential in order to obtain quantitative results for transition metal complexes. Good results were obtained with DMRG-cu(4)-CASPT2 as compared to full CASPT2 and DMRG-CASPT2 in calculations with small- and medium-sized active spaces. In calculations with large-sized active spaces (∼30 active orbitals), the performance of DMRG-cu(4)-CASPT2 is less impressive due to the errors originating from both the finite number of renormalized states m and the 4-RDM approximation.