Classical statistical mechanics tries to derive the macroscopic properties of matter starting from the mechanical laws that rule the behaviour of single particles. To describe equilibrium states, only observables accounting for correlations among states are considered, and only systems consisting of a large number of particles are taken into account. The observables are described by continuous functions on phase space, and the states are represented by linear assignments of a number to each observable. Within the framework of the canonical ensemble, one deals with mechanical systems in thermal equilibrium with a thermal reservoir, and the equilibrium state is reached as a result of the interaction with the external world. The external world may be really external, or equally well, the unrecognized internal degrees of freedom, like in the calculation of viscosity or thermal conductivity. If really only the external world is the cause we may expect some surface dependence while an internal unrecognized degree of freedom would have a volume effect, unless the interactions are long range. The microcanonical ensemble is instead introduced to study isolated mechanical systems, and the equilibrium is viewed as a temporal average, rather than as a limit. Attention is then focused on partition functions, the theorem of equipartition of energy and an elementary theory of specific heats. In the second part, the Planck derivation of the law of black-body radiation is analysed, presenting in chronological order the Kirchhoff theorem, the Stefan law, the Wien displacement law, the Rayleigh–Jeans formula and the Planck hypothesis. Further topics discussed are the Einstein and Debye quantum models for specific heats of solids. These topics prepare the ground for the introduction of quantum statistical mechanics. The third part is, in fact, devoted to the analysis of identical particles in quantum mechanics.
Classical statistical mechanics tries to derive the macroscopic properties of matter starting from the mechanical laws that rule the behaviour of single particles. To describe equilibrium states, only observables accounting for correlations among states are considered, and only systems consisting of a large number of particles are taken into account. The observables are described by continuous functions on phase space, and the states are represented by linear assignments of a number to each observable. Within the framework of the canonical ensemble, one deals with mechanical systems in thermal equilibrium with a thermal reservoir, and the equilibrium state is reached as a result of the interaction with the external world. The external world may be really external, or equally well, the unrecognized internal degrees of freedom, like in the calculation of viscosity or thermal conductivity. If really only the external world is the cause we may expect some surface dependence while an internal unrecognized degree of freedom would have a volume effect, unless the interactions are long range. The microcanonical ensemble is instead introduced to study isolated mechanical systems, and the equilibrium is viewed as a temporal average, rather than as a limit. Attention is then focused on partition functions, the theorem of equipartition of energy and an elementary theory of specific heats. In the second part, the Planck derivation of the law of black-body radiation is analysed, presenting in chronological order the Kirchhoff theorem, the Stefan law, the Wien displacement law, the Rayleigh–Jeans formula and the Planck hypothesis. Further topics discussed are the Einstein and Debye quantum models for specific heats of solids. These topics prepare the ground for the introduction of quantum statistical mechanics. The third part is, in fact, devoted to the analysis of identical particles in quantum mechanics.
Thermodynamics is used to describe the bulk properties of matter in or near equilibrium. Many scientists, notably Boyle, Carnot, Clausius, Gay-Lussac, Gibbs, Joule, Kelvin, and Rumford, contributed to the development of the field over three centuries. Quantities such as mass, pressure, energy, and so on are readily defined and measured. Classical statistical mechanics attempts to understand thermodynamics by the application of classical mechanics to the microscopic particles making up the system. Great progress in this field was made by physicists like Boltzmann and Maxwell. Temperature, entropy, particle number, and chemical potential are thus understandable in terms of the microscopic nature of matter. Classical mechanics is inadequate in many circumstances however, and ultimately must be replaced by quantum mechanics. In fact, the ultraviolet catastrophe encountered by the application of classical mechanics and electromagnetism to blackbody radiation was one of the problems that led to the development of quantum theory. The development of quantum statistical mechanics was achieved by a number of twentieth century physicists, most notably Planck, Einstein, Fermi, and Bose. The purpose of this chapter is to give a mini-review of the basic concepts of quantum statistical mechanics as applied to noninteracting systems of particles. This will set the stage for the functional integral representation of the partition function, which is a cornerstone of modern relativistic quantum field theory and the quantum statistical mechanics of interacting particles and fields. Ensembles One normally encounters three types of ensemble in equilibrium statistical mechanics. The microcanonical ensemble is used to describe an isolated system that has a fixed energy E , a fixed particle number N , and a fixed volume V .
Introduction In our treatment of quantum mechanics we discussed the notion of the state of a given system. The state was specified by giving the eigenvalues of a maximal set of mutually commuting observables. This represented the most information we could have about a given system in principle. In practice, of course, we do not really have all of the necessary information about the eigenvalues available. No experimentalist sets out with the primary intention of obtaining results which correspond to a maximal set of mutually compatible observables for any macroscopic system, such as a gas. Even a very small volume of gas contains an enormous number of particles. The quantum mechanical state would require us to know a great deal of information about the internal states of the electrons and nuclei of the gas molecules. The experimentalist may only be concerned with gross properties such as the pressure, internal energy, or specific heat for example. Most of the detailed information about the detailed state of the system is neither observed, nor of direct interest. Instead we must content ourselves with a description of the average, or most likely, behaviour of the system in the probabilistic sense. The usual technique for doing this consists of the introduction of an ensemble, meaning a very large collection of systems whose measured macroscopic properties are the same as those for the system we are interested in, but whose unobserved properties can vary.
We explore some aspects of nonequilibrium statistical mechanics of classical and quantum systems. Two chapters are devoted to fluctuation theorems which were originally derived for classical systems. The main challenge in formulating them in quantum mechanics is the fact that fundamental quantities of interest, like work, are defined via the classical concept of a phase space trajectory. We utilize the decoherent histories conceptual framework, in which classical trajectories emerge in quantum mechanics as a result of coarse graining, and provide a first-principles analysis of the nonequilibrium work relation of Jarzynski and Crooks's fluctuation theorem for a quantum system interacting with a general environment based on the quantum Brownian motion (QBM) model. We indicate a parameter range at low temperatures where the theorems might fail in their original form. Fluctuation theorems of Jarzynski and Crooks for systems obeying classical Hamiltonian dynamics are derived under the assumption that the initial conditions are sampled from a canonical ensemble, even though the equilibrium state of an isolated system is typically associated with the microcanonical ensemble. We address this issue through an exact analysis of the classical Brownian motion model. We argue that a stronger form of ensemble equivalence than usually discussed in equilibrium statistical mechanics is required for these theorems to hold in the infinite environment limit irrespective of the ensemble used, and proceed to prove it for this model. An exact expression for the probability distribution of work is obtained for finite environments. Intuitively one expects a system to relax to an equilibrium state when brought into contact with a thermal environment. Yet it is important to have rigorous results that provide conditions for equilibration and characterize the equilibrium state. We consider the dynamics of open quantum systems using the Langevin and master equations and rigorously show that under fairly general conditions quantum systems interacting with a heat bath relax to the equilibrium state defined as the reduced thermal state of the system plus environment, even in the strong coupling regime. Our proof is valid to second-order in interaction strength for general systems and exact for the linear QBM model, for which we also show the equivalence of multi-time correlations. In the final chapter we give a sampling of our investigations into macroscopic quantum phenomena. We work out in detail a specific example of how and under what conditions the center of mass (CoM) coordinate of a macroscopic object emerges as the relevant degree of freedom. Interaction patterns are studied in terms of the couplings they induce between the CoM and relative coordinates of two macroscopic objects. We discuss the implications of these interaction patterns on macroscopic entanglement.
Recently, the possibility of investigating single molecule, or single spin observables, as well as the necessity of a better understanding of the mechanisms underlying quantum dynamics in order to obtain nanoscale devices and nanostructered materials suitable for quantum computing tasks, have revived the interest in foundational aspects of quantum statistical mechanics. This thesis aims to give a contribution to this field by re-considering the statistical characterization of a quantum system at the light of some paradigmatic changes in our understanding of quantum theory which have taken place in the last two decades. In particular the impressive development of quantum information theory has changed the perceptions of quantum entanglement: for a long time it has been considered a somewhat paradoxical property of the matter at the atomic scale, but now it is regarded as an essential and ubiquitous phenomenon whose consequences are affecting the very macroscopic world that we experience. Still the decoherence program has brought out the importance of considering a quantum system together with its environment in order to clarify some key aspects of quantum dynamics. Thus, we start from the idea that quantum correlations are ubiquitous and somewhat uncontrollable in systems with many degrees of freedom which are typically considered in statistical mechanics. As a consequence we assume the standpoint that quantum statistical mechanics has not to be based on the underlying idea of a collection of many, independent quantum systems but rather it has to emerge at the level of a global wavefunction (pure state) which describes the system as well as its environment as a whole. In order to investigate the consequences of these assumptions we study the equilibrium distribution of an isolated quantum system. This is defined, in analogy with the ergodic foundations of classical statistical mechanics, on the basis of the time evolution of the quantum state. Then, we study the emergence of thermodynamic properties in a quantum system by studying the probability distribution of some function of interests, as the entropy and the equilibrium state of a subsystem, on Ensembles of Pure States. Such a probability distribution is derived from the geometry of the Hilbert space, and the theoretical tools suitable for its characterization are developed. On the one hand we perform a numerical sampling of the ensemble distributions by employing Monte Carlo techniques, on the other hand simpler analytical approximation of the geometrical distributions are derived by means of a maximum entropy principle. Model systems composed of an ensemble of spins are chosen to illustrate the salient features which emerge from the developed theoretical framework: the main point is that the Ensemble Distributions of “thermodynamic observables” (entropy or equilibrium state of a subsystem) are sharply peaked around a typical value. From the analysis it emerges that each of the overwhelming majority of the wavefunctions which has appreciable weight in the considered ensemble, is characterized by the same value of the “macroscopic” functions. This is a striking evidence of the “typicality” of these properties. In the essence, our impossibility to know the state of the system in detail does not matter, just for the remarkable fact that almost all quantum states behave essentially in the same way. By virtue of this typicality the study of the behaviour of the typical values of the thermodynamic function become meaningful. Notably, under certain conditions, one recovers the results of standard statistical mechanics, that is, the equilibrium average of the state of a subsystem can be cast in the Boltzmann canonical form at the temperature given by the usual thermodynamical relation . In the second part of the thesis we consider the dynamical aspects of the equilibrium state of a subsystem interacting with its environment. The fluctuations around the equilibrium average critically depends on the entanglement between the system and the environment and on the form of the interaction Hamiltonian. The connection between the dynamics of the fluctuations of an observable at the equilibrium and the relaxation toward the equilibrium from a “non typical” initial value is also investigated with the aid of simple model systems. The study presented in this thesis was partly motivated by a critical analysis of the statistical methods available for the theoretical modelling of magnetic resonance experiments. One of these, the Stochastic Liouville Equation, has been employed in a work completed during the first year of my Ph.D. program in order to interpret some feature of a two dimensional electron spin resonance experiment, [Fresch B., Frezzato D., Moro G. J., Kothe G., Freed J. H.; J. Phys. Chem. B., 110, 24238, (2006)].
Review of quantum statistical mechanicsThermodynamics is used to describe the bulk properties of matter in or near equilibrium.Many scientists, notably Boyle, Carnot, Clausius, Gay-Lussac, Gibbs, Joule, Kelvin, and Rumford, contributed to the development of the field over three centuries.Quantities such as mass, pressure, energy, and so on are readily defined and measured.Classical statistical mechanics attempts to understand thermodynamics by the application of classical mechanics to the microscopic particles making up the system.Great progress in this field was made by physicists like Boltzmann and Maxwell.Temperature, entropy, particle number, and chemical potential are thus understandable in terms of the microscopic nature of matter.Classical mechanics is inadequate in many circumstances however, and ultimately must be replaced by quantum mechanics.In fact, the ultraviolet catastrophe encountered by the application of classical mechanics and electromagnetism to blackbody radiation was one of the problems that led to the development of quantum theory.The development of quantum statistical mechanics was achieved by a number of twentieth century physicists, most notably Planck, Einstein, Fermi, and Bose.The purpose of this chapter is to give a mini-review of the basic concepts of quantum statistical mechanics as applied to noninteracting systems of particles.This will set the stage for the functional integral representation of the partition function, which is a cornerstone of modern relativistic quantum field theory and the quantum statistical mechanics of interacting particles and fields. EnsemblesOne normally encounters three types of ensemble in equilibrium statistical mechanics.The microcanonical ensemble is used to describe an isolated system that has a fixed energy E, a fixed particle number N , and a fixed 1
Abstract Statistical mechanics is the art of predicting the behaviour of a system with a large number of degrees of freedom, given the laws governing its microscopic behaviour. It divides naturally into two parts. The first is the more fundamental. It tries to answer general questions concerning the behaviour of systems with many degrees of freedom, such as how order can arise from the apparent chaos of the microscopic behaviour, and how time-symmetric microscopic laws can give rise to the time asymmetry observed in the macroscopic world. The second part of statistical mechanics is concerned with using the results of this analysis to determine the behaviour of specific systems. This is what we will be doing in this book. Statistical mechanics will be used as a tool to study critical phenomena in particular systems.