We present a Quantum Key Distribution system comprising a hand held transmitter device (Alice) and a fixed terminal (Bob). The devices are highly asymmetrical with as much functionality as possible placed into the Bob terminal (a 4u 19in. rack) which is much less restricted on its size. The small size (80x50x10mm) and relatively low complexity will allow the hand held Alice to be cheaply mass produced and therefore widely available. A potential use for this technology would be as a method to allow the general public to benefit from a wider metropolitan or national QKD network by establishing key with trusted network nodes. The Alice device optics comprise 4 pulsed 300um LEDs behind polarizers to produce the photon states for the BB84 protocol. Light from the LEDs is combined and spatially filtered using a single mode fibre, the output of which is collimated by a lens at the optical output of the device. The device is currently controlled via USB by a PC or mobile phone. The Bob terminal is split into two modules; broadly categorized as “optical” and “processing”. The optical module contains beam splitters for state discrimination and photon detection. The processing module contains a PC, wireless router, time-tagging electronics and power supply. The modular approach allows for a flexible platform for different QKD experiments, for example change of wavelength or protocol would involve switching out only the optical module. This work forms part of the Quantum Communications hub and was carried out with EPSRC funding (Quantum Communications Hub, grant no. EP/M013472/1).
We present a Quantum Key Distribution system comprising a hand held transmitter device (Alice) and a fixed terminal (Bob). The devices are highly asymmetrical with as much functionality as possible placed into the Bob terminal (a 4u 19in. rack) which is much less restricted on its size. The small size (80x50x10mm) and relatively low complexity will allow the hand held Alice to be cheaply mass produced and therefore widely available. A potential use for this technology would be as a method to allow the general public to benefit from a wider metropolitan or national QKD network by establishing key with trusted network nodes. The Alice device optics comprise 4 pulsed 300um LEDs behind polarizers to produce the photon states for the BB84 protocol. Light from the LEDs is combined and spatially filtered using a single mode fibre, the output of which is collimated by a lens at the optical output of the device. The device is currently controlled via USB by a PC or mobile phone. The Bob terminal is split into two modules; broadly categorized as “optical” and “processing”. The optical module contains beam splitters for state discrimination and photon detection. The processing module contains a PC, wireless router, time-tagging electronics and power supply. The modular approach allows for a flexible platform for different QKD experiments, for example change of wavelength or protocol would involve switching out only the optical module. This work forms part of the Quantum Communications hub and was carried out with EPSRC funding (Quantum Communications Hub, grant no. EP/M013472/1).
Unlike currently implemented encryption schemes, Quantum Key Distribution provides a secure way of generating and distributing a key among two parties. Although a multitude of research platforms has been developed, the integration of QKD units within classical communication systems remains a tremendous challenge. The recently achieved maturity of integrated photonic technologies could be exploited to create miniature QKD add-ons that could extend the primary function of various existing systems such as mobile devices or optical stations. In this work we report on an integrated optics module enabling secure short-distance communication for, e.g., quantum access schemes. Using BB84-like protocols, Alice's mobile low-cost device can exchange secure key and information everywhere within a trusted node network. The new optics platform (35×20×8mm) compatible with current smartphone's technology generates NIR faint polarised laser pulses with 100MHz repetition rate. Fully automated beam tracking and live basis-alignment on Bob's side ensure user-friendly operation with a quantum link efficiency as high as 50% stable over a few seconds.
Mastering the generation, propagation and detection of electro-magnetic waves has enabled a technological breakthrough that has changed our entire society. World-wide communication through the telephone and the internet has become an integral part of our daily-life, which is expected to grow even further with the emergence of the internet of things. While secure communication was of concern mostly for governmental and financial institutions, digital security has now caught the attention of the general public. The weaknesses of cur- rent encryption protocols, such as the existence of back-doors or the predicted breakdown of popular algorithms such as RSA, reveal the need for alternative encryption schemes ensuring unconditional security on all types of devices. Quantum Key Distribution (QKD) has emerged as a powerful option to ensure a private communication between two users. Based on the laws of quantum mechanics, this class of protocols offers the possibility to detect the presence of a third party trying to intercept the key during its distribution, and even to quantify the amount of leaked information. While most research projects focus on long distance applications, little attention has been devoted to short distance schemes such as wireless payment, network access and authentication, which could highly benefit from QKD-enhanced security. This thesis focuses on the development of a miniature QKD sender add-on that could be embedded either in mobile devices or in existing optical communication platforms, thus allowing for a secure key exchange with a shared dedicated receiver over a free- space link. The proposed optics architecture (35 × 20 × 8 mm 3 ) is optimised for BB84-like protocols and uses an array of four Vertical-Cavity Surface-Emitting Lasers with highly similar properties to generate 40 ps long near-infrared faint coherent pulses at 100 MHz repetition rate. Under strong modulation, the polarisation of the pulses is not well defined and enables an external control of each diode’s emission by a wire-grid polariser. The four beams are spatially overlapped in a polarisation-insensitive femtosecond laser written waveguide array, and combined with a red beacon laser using an external beamsplitter to ensure a stable, synchronised optical link with the receiver. The complete module is compatible with current smartphone technology, allowing to run the classical post-processing over WLAN in the future. First tests with a free-space receiver indicate an average error ratio of 3.3 % and an asymptotic secure key rate of 54 kHz under static alignment. For the first time, a secure key exchange between a mobile platform held by a user and a receiver equipped with a dynamic alignment system could be demonstrated with an error ratio of 4.1 % and a secure key rate of 31 Hz. The further optimisation of the experimental parameters and the implementation of a decoy protocol will enhance the key generation rate as well as the general security of the system. The results of this thesis pave the way towards unprecedented security in wireless optical networks, as examplified for the communication between a mobile device and a dedicated receiver.
A Quantum Key Distribution system has been demonstrated with a focus on applicability of the technology to a consumer use model.The optical devices were split into a large, expensive "Quantum ATM" (the Bob terminal) and a small, cheap handheld section (the Alice device).Work was initially done to integrate the devices into a realistic demonstration system which was exhibited at several international conferences.Following this success, the devices constituent parts were isolated and improved upon.Work on the Alice device focused upon proposing a new scheme for light collimation and then investigating a method to enact this.In the Bob device the progress was directed towards a more effective single photon detection system utilizing active quenching.An asymptotic secure key rate of 20kb/s was obtained at a bit error rate (BER) of 4% corresponding to a daylight operation scenario.A docking scheme was enacted to simplify the alignment of the optical channel which was shown to be repeatable over at least 50 cycles.The system was also shown to be stable over an extended period of time.
In this work we introduce a complete Quantum Key Distribution device that implements a decoy-state protocol [1].Qubits are coded in the polarization state of weak optical pulses, produced by infrared LEDs [2].The link between Transmission (Alice) and Reception (Bob) stages is open air, which is the preferred channel to eventually through low-orbit satellites establish quantum communications.Both terminals are placed on different rooms, separated by approximately 8 meters.In order to compensate misalignments produced by small mechanic displacements or atmospheric thermal gradients, the system implements a closed-loop for automatic alignment based on a counter-propagating laser, a servo-actuated mirror and a CMOS image sensor.The apparatus runs in an autonomous way, and in the above described conditions it is able to generate raw cryptographic key at a rate of 185 bits/s, with a QBER of 6.15%.
Quantum key distribution (QKD) is a technology that allows two users to communicate with theoretically perfect security using standard optical fibres. This is possible by transmitting the key on single photons, meaning a measurement by an eavesdropper disturbs the system in a way observable to the legitimate parties. The technology has advanced since the first protocol proposed in 1984, to the stage where there are now many protocols that can be experimentally implemented. These protocols have allowed secure keys to be generated over distances greater than 400 km and with secure key rates over 10 Mbit/s. In a metropolitan QKD network, it would be desirable for as many users to be connected as possible. Unfortunately, each protocol comes with different requirements on the transmitter and receiver. Even within a single protocol, different clock rates can require individualised transmitter and receiver hardware. This prohibits users from communicating with all receivers, unless they have complex transmitters with hardware for many protocols. This thesis develops a transmitter for practical QKD that is able to adapt to a number of different protocols with no changes to the hardware. The transmitter works using optical injection locking, where a pulse preparation laser adopts the phase of a phase preparation laser. Controlling the phase and intensity of the pulses in this way removes the side channel ordinarily present with direct modulation, in that the phase, intensity and frequency simultaneously change in response to an applied current. The cavity-enhanced electro-optic effect allows for the first demonstration of sub-volt half-wave phase modulation at high clock rates. The transmitter successfully demonstrates phase encoding, intensity encoding and on-demand phase randomisation. This allows for the experimental realisation and direct comparison of different QKD protocols, including one that has never before been implemented due to experimental complexity. A stable intensity modulator is also developed, based on a Sagnac interferometer. This removes a side channel in QKD systems and integrates well with the directly-modulated quantum transmitter. This development also means that the transmitter can implement all current two-party QKD protocols based on weak coherent pulses. The transmitter has the potential to become the standard transmitter for future quantum communication networks due to its stability, versatility and power efficiency. The design could also be demonstrated on a photonic chip, making it compact enough to fit in small transmitter units.
To enable practical real-time quantum key distribution (QKD) over free-space links, such as for satellite-to-ground secure communications, the encoding rate of the system should be sufficiently high to distribute long keys (>106bits) in a short period of time (< 300 seconds) [1]. Here, we report an optical assembly and driving electronics designed to form a low-size}, weight and power (SWaP) QKD transmitter, which can operate at gigahertz clock rates. The QKD transmitter employs multiple vertical cavity surface emission lasers (VCSELs), which provide a low power and high polarization extinction ratio (PER) source of weak coherent pulses of light. These light pulses are combined using an intrinsically stable optical combining module utilising polarization-maintaining fiber. In the experiments presented we employ discrete variable QKD via the decoy-state BB84 protocol to achieve high secure key rates over large channel losses [2]. We characterise the source using a free-space polarization decoder over short free-space links within the laboratory and explore the performance of the system with commercially available single photon detectors. Fig. 1 Plot showing the effect of varying the channel loss over the free-space link. We show the measured quantum bit error rate (blue circles), sifting rate (green triangles) and secure key rate (red squares) alongside the rates simulated using the measured system parameters (solid lines). We characterise the system up to ~38 db of channel loss, revealing positive key rates at relatively high channel loss.