Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

physica status solidi (a)

Generation of high quality random numbers via an all-silicon-based approach

Zahra Bisadi, Alessio Meneghetti, Alessandro Tomasi, A. Tengattini, Giorgio Fontana, Georg Pucker, Paolo Bettotti, Massimiliano Sala, Lorenzo Pavesi

Published Aug 1, 2016• 6 citations
Publisher

Abstract

A quantum random number generator (QRNG) based on a silicon nanocrystals (Si-NCs) light emitting device (LED) coupled with a silicon single photon avalanche photodiode (Si-SPAD) is presented. A simple setup is used for the generation of random bits. The modeled approach assures a negligible bias on datasets of 100 Mbits length. The raw data pass all the statistical tests in the National Institute of Standards and Technology (NIST) suite without any post-processing operations. The bit-rate of 0.6 Mbps is achieved. The information-theoretically provable randomness extractor of Toeplitz-hashing function is applied to longer datasets (1 Gbits) to extract the randomness, to minimize the bias, and consequently pass all the NIST tests. Stabilizing the temperature, resetting the applied current to the LED, or a feedback system can also be used as parameter control solutions to generate good quality, long datasets of random numbers suitable for cryptographic applications.

DOI
10.1002/pssa.201600298

Related papers

A robust approach to the generation of high-quality random numbers

Zahra Bisadi, Giorgio Fontana, Enrico Moser +2 more

A random number generation approach comprising a silicon nanocrystals LED (Si-NCs LED), silicon single photon avalanche photodiode (Si SPAD) and a field-programmable gate array (FPGA) is introduced. The Si-NCs LED is the source of entropy with photon emission in the visible range detectable by silicon detectors allowing the fabrication of an all-silicon-based device. The proposed quantum random number generator (QRNG) is robust against variations of the internal and external parameters such as aging of the components, changing temperature, the ambient interferences and the silicon detector artifacts. The raw data show high quality of randomness and passed all the statistical tests in National Institute of Standards and Technology (NIST) tests suite without the application of a post-processing algorithm. The efficiency of random number generation is 4-bits per detected photon.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Oct 24, 2016•1 citation

Quantum random number generator based on silicon nanocrystals LED

Zahra Bisadi, Alessio Meneghetti, Giorgio Fontana +3 more

We present a post-processing free quantum random number generator (QRNG) based on silicon nanocrystals (Si-NCs) LEDs as a source of randomness. The relatively simple setup for data extraction, a negligible bias measured from the datasets and applying no post-processing operations to the raw data are the main advantages of this QRNG . The obtained bit sequences pass all the NIST tests and the highest bit-rate achieved is 0.6 Mbps.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Jun 1, 2015•7 citations

Compact Quantum Random Number Generator with Silicon Nanocrystals Light Emitting Device Coupled to a Silicon Photomultiplier

Zahra Bisadi, Fabio Acerbi, Giorgio Fontana +4 more

A small-sized photonic quantum random number generator, easy to be implemented in small electronic devices for secure data encryption and other applications, is highly demanding nowadays. Here, we propose a compact configuration with Silicon nanocrystals large area light emitting device (LED) coupled to a Silicon photomultiplier to generate random numbers. The random number generation methodology is based on the photon arrival time and is robust against the non-idealities of the detector and the source of quantum entropy. The raw data show high quality of randomness and pass all the statistical tests in national institute of standards and technology tests (NIST) suite without a post-processing algorithm. The highest bit rate is 0.5 Mbps with the efficiency of 4 bits per detected photon.

Frontiers in Physics•Feb 14, 2018•14 citations

Robust Quantum Random Number Generation With Silicon Nanocrystals Light Source

Zahra Bisadi, Giorgio Fontana, Enrico Moser +2 more

A robust quantum random number generation methodology has been developed and tested. The physical setup is based on a silicon nanocrystals light source coupled with a Si single photon avalanche diode driving a fully synchronous digital logic in a field-programmable gate array. After detailed analyses of the source and the detector, methods have been developed to make the nonidealities of the system and their consequent drawbacks decoupled from the quality of the generated random numbers. All the statistical tests in the national institute of standards and technology tests suite and the TestU01 Alphabit battery are consistently passed without a postprocessing operation on the raw data and without any feedback action on the photon source or any other parameter of the system. The maximum demonstrated bit-rate reaches 1.68 Mb/s, with an efficiency of 4 bits per detected photon. The modeling proves that the system is not influenced by variations of the internal and external parameters, such as the aging of the components and changing temperature.

Journal of Lightwave Technology•Jan 23, 2017•14 citations

Green InGaN LED-based quantum random number generation compatible with silicon avalanche photodiodes

Ivan Kotov, Heming Lin, Wenqing Niu +4 more

Random number generation is a fundamental task for modern cryptography, secure communications, and stochastic computing. Quantum random number generators (QRNGs) provide inherently unpredictable data derived from quantum physical processes and therefore offer stronger security guarantees than classical approaches. However, some optical QRNGs rely on blue light-emitting diodes (LEDs), which suffer from reduced spectral matching with commonly used silicon avalanche photodiodes (APDs). This mismatch restricts the achievable signal-to-noise ratio (SNR) and limits the extractable quantum entropy. Here, we demonstrate a spontaneous emission-based QRNG employing a green InGaN LED coupled to a silicon APD. The improved spectral overlap between the emitted light and the APD responsivity results in a significantly higher SNR than with previously reported blue LEDs operating at similar electrical power levels. The measured signal is first filtered with a high-pass filter to suppress low-frequency noise, then randomness is extracted using the SHAKE256 hash function. A detailed statistical and spectral analysis is performed to evaluate the extractable entropy of the generated data. A physically reasonable estimation yields a quantum entropy generation rate of 2.78 Gbit/s. These results establish longer-wavelength nitride-based LEDs as a more suitable entropy source for QRNG systems, using inexpensive and widely available silicon photodiodes.

Optics Express•Apr 6, 2026•1 citation

Monolithic Quantum Random Number Generator Containing Si-LED, SPAD and Analog Processing

Horst Zimmermann, David Bugl, Bernhard Goll +3 more

This work describes a monolithically integrated photonic quantum random number generator (QRNG) in$0.35 \mu ~\mathrm{m}$CMOS. This QRNG consists of a light-emitting diode inside a deep N-well, a ring single-photon avalanche diode (SPAD), a fast cascoded active quenching and resetting circuit, and an analog evaluation circuit determining whether the random bit is a “0” or “1”. The random bits are created by comparison of two consecutive time intervals between photon detections using charging and discharging a capacitor with a constant current as well as a comparator. The time intervals can be in the range from 10 ns to$10 \mu ~\mathrm{s}$. With$\pm 3.3 ~\mathrm{V}$supply voltage, the power consumption of the complete circuits is between 1.1 mW and 4.55 mW depending on the LED emission and detection rate of the SPAD. After XOR-hashing, the NIST tests were passed.

IEEE International Symposium on Design and Diagnostics of Electronic Circuits & Systems (DDECS)•Apr 27, 2026•0 citations
A quantum random number generator (QRNG) based on a silicon nanocrystals (Si-NCs) light emitting device (LED) coupled with a silicon single photon avalanche photodiode (Si-SPAD) is presented. A simple setup is used for the generation of random bits. The modeled approach assures a negligible bias on datasets of 100 Mbits length. The raw data pass all the statistical tests in the National Institute of Standards and Technology (NIST) suite without any post-processing operations. The bit-rate of 0.6 Mbps is achieved. The information-theoretically provable randomness extractor of Toeplitz-hashing function is applied to longer datasets (1 Gbits) to extract the randomness, to minimize the bias, and consequently pass all the NIST tests. Stabilizing the temperature, resetting the applied current to the LED, or a feedback system can also be used as parameter control solutions to generate good quality, long datasets of random numbers suitable for cryptographic applications.
A random number generation approach comprising a silicon nanocrystals LED (Si-NCs LED), silicon single photon avalanche photodiode (Si SPAD) and a field-programmable gate array (FPGA) is introduced. The Si-NCs LED is the source of entropy with photon emission in the visible range detectable by silicon detectors allowing the fabrication of an all-silicon-based device. The proposed quantum random number generator (QRNG) is robust against variations of the internal and external parameters such as aging of the components, changing temperature, the ambient interferences and the silicon detector artifacts. The raw data show high quality of randomness and passed all the statistical tests in National Institute of Standards and Technology (NIST) tests suite without the application of a post-processing algorithm. The efficiency of random number generation is 4-bits per detected photon.
A small-sized photonic quantum random number generator, easy to be implemented in small electronic devices for secure data encryption and other applications, is highly demanding nowadays. Here, we propose a compact configuration with Silicon nanocrystals large area light emitting device (LED) coupled to a Silicon photomultiplier to generate random numbers. The random number generation methodology is based on the photon arrival time and is robust against the non-idealities of the detector and the source of quantum entropy. The raw data show high quality of randomness and pass all the statistical tests in national institute of standards and technology tests (NIST) suite without a post-processing algorithm. The highest bit rate is 0.5 Mbps with the efficiency of 4 bits per detected photon.
A robust quantum random number generation methodology has been developed and tested. The physical setup is based on a silicon nanocrystals light source coupled with a Si single photon avalanche diode driving a fully synchronous digital logic in a field-programmable gate array. After detailed analyses of the source and the detector, methods have been developed to make the nonidealities of the system and their consequent drawbacks decoupled from the quality of the generated random numbers. All the statistical tests in the national institute of standards and technology tests suite and the TestU01 Alphabit battery are consistently passed without a postprocessing operation on the raw data and without any feedback action on the photon source or any other parameter of the system. The maximum demonstrated bit-rate reaches 1.68 Mb/s, with an efficiency of 4 bits per detected photon. The modeling proves that the system is not influenced by variations of the internal and external parameters, such as the aging of the components and changing temperature.
Random number generation is a fundamental task for modern cryptography, secure communications, and stochastic computing. Quantum random number generators (QRNGs) provide inherently unpredictable data derived from quantum physical processes and therefore offer stronger security guarantees than classical approaches. However, some optical QRNGs rely on blue light-emitting diodes (LEDs), which suffer from reduced spectral matching with commonly used silicon avalanche photodiodes (APDs). This mismatch restricts the achievable signal-to-noise ratio (SNR) and limits the extractable quantum entropy. Here, we demonstrate a spontaneous emission-based QRNG employing a green InGaN LED coupled to a silicon APD. The improved spectral overlap between the emitted light and the APD responsivity results in a significantly higher SNR than with previously reported blue LEDs operating at similar electrical power levels. The measured signal is first filtered with a high-pass filter to suppress low-frequency noise, then randomness is extracted using the SHAKE256 hash function. A detailed statistical and spectral analysis is performed to evaluate the extractable entropy of the generated data. A physically reasonable estimation yields a quantum entropy generation rate of 2.78 Gbit/s. These results establish longer-wavelength nitride-based LEDs as a more suitable entropy source for QRNG systems, using inexpensive and widely available silicon photodiodes.
This work describes a monolithically integrated photonic quantum random number generator (QRNG) in0.35μ m0.35 \mu ~\mathrm{m}0.35μ mCMOS. This QRNG consists of a light-emitting diode inside a deep N-well, a ring single-photon avalanche diode (SPAD), a fast cascoded active quenching and resetting circuit, and an analog evaluation circuit determining whether the random bit is a “0” or “1”. The random bits are created by comparison of two consecutive time intervals between photon detections using charging and discharging a capacitor with a constant current as well as a comparator. The time intervals can be in the range from 10 ns to10μ s10 \mu ~\mathrm{s}10μ s. With±3.3 V\pm 3.3 ~\mathrm{V}±3.3 Vsupply voltage, the power consumption of the complete circuits is between 1.1 mW and 4.55 mW depending on the LED emission and detection rate of the SPAD. After XOR-hashing, the NIST tests were passed.