Cold atoms in optical lattices are an ideal test bed to explore ratchet physics. This is largely due to the extreme tunability of optical lattice systems, which allows one to precisely control the shape of the potential and of any applied force, as well as to vary at will the level of dissipation. Since the very first demonstration of directed motion in a cold atom system by Mennerat-Robilliard et al. (1999), a number of experimental investigations with cold atoms in optical lattices have explored different aspects of the physics of ratchets. Here, the focus is first on the experiments in the classical regime which explored the relationship between symmetry and transport in a.c. driven ratchets. Experiments in the full quantum Hamiltonian regime are then described, and the unique features of such a regime highlighted. Ratchets in dissipative optical lattices Dissipative optical lattices Optical lattices are periodic potentials for atoms created by the interference of two or more laser fields.The detuning between the laser fields and the nearest atomic transition will emerge as a key parameter to describe the light–atom interaction. It is thus important to distinguish two very different situations: the case of fardetuned laser fields, and the case of near-resonant laser fields. For far-detuned laser fields, a purely conservative potential is produced. As will be discussed in the following sections, far-detuned optical lattices are ideal to model Hamiltonian systems. In the case of near-resonant laser fields, the interaction between the laser and the atoms may lead, under appropriate conditions, to dissipative dynamics. That is, for an appropriately arranged set of near-resonant optical lattices, a dissipative optical lattice, is produced, where the set of laser fields produce at once the periodic potential acting on the atoms and the cooling mechanism, which decreases their kinetic energy and lead to the trapping of the atoms at the bottom of potential wells. The principles behind the cooling mechanism, termed Sisyphus cooling for reasons which will become apparent in the following discussion, can be captured by considering the minimal configuration of a one-dimensional optical lattice and a J g = 1 / 2 → J e = 3 / 2 atomic transition. This is the simplest configuration in which Sisyphus cooling takes place.
Cold atoms in optical lattices are an ideal test bed to explore ratchet physics. This is largely due to the extreme tunability of optical lattice systems, which allows one to precisely control the shape of the potential and of any applied force, as well as to vary at will the level of dissipation. Since the very first demonstration of directed motion in a cold atom system by Mennerat-Robilliard et al. (1999), a number of experimental investigations with cold atoms in optical lattices have explored different aspects of the physics of ratchets. Here, the focus is first on the experiments in the classical regime which explored the relationship between symmetry and transport in a.c. driven ratchets. Experiments in the full quantum Hamiltonian regime are then described, and the unique features of such a regime highlighted. Ratchets in dissipative optical lattices Dissipative optical lattices Optical lattices are periodic potentials for atoms created by the interference of two or more laser fields.The detuning between the laser fields and the nearest atomic transition will emerge as a key parameter to describe the light–atom interaction. It is thus important to distinguish two very different situations: the case of fardetuned laser fields, and the case of near-resonant laser fields. For far-detuned laser fields, a purely conservative potential is produced. As will be discussed in the following sections, far-detuned optical lattices are ideal to model Hamiltonian systems. In the case of near-resonant laser fields, the interaction between the laser and the atoms may lead, under appropriate conditions, to dissipative dynamics. That is, for an appropriately arranged set of near-resonant optical lattices, a dissipative optical lattice, is produced, where the set of laser fields produce at once the periodic potential acting on the atoms and the cooling mechanism, which decreases their kinetic energy and lead to the trapping of the atoms at the bottom of potential wells. The principles behind the cooling mechanism, termed Sisyphus cooling for reasons which will become apparent in the following discussion, can be captured by considering the minimal configuration of a one-dimensional optical lattice and a J g = 1 / 2 → J e = 3 / 2 atomic transition. This is the simplest configuration in which Sisyphus cooling takes place.
This thesis describes the development and presents the results of a series of experiments on the ratchet effect with laser-cooled caesium atoms in a twodimensional dissipative optical lattice. The ratchet effect describes the directed motion of atoms that are undergoing an unbiased (time-average equal to zero) driving force, which can be realised experimentally using cold atoms in a driven optical lattice. The thesis describes the experimental set-up and methods used to cool and trap atoms in a two-dimensional optical lattice using well-known laser-cooling techniques, as well as the computer software used to control the experiment. It then goes on to present the results of ratchet experiments with cold atoms in the two-dimensional driven optical lattice. Using specific forms of the driving force – namely the biharmonic and splitbiharmonic driving – the atoms undergo directed transport even though the driving forces time-average to zero, corresponding to a manifestation of the ratchet effect. The ratchet transport of the atoms is characterised for various parameters of the driving force. The transport for quasiperiodic driving forces is considered by examining the velocity resonance as a function of relative frequency, and it is shown that the finite duration of the driving becomes a relevant parameter for determining the transport behaviour. An analysis of the structure of the velocity resonance is provided. The results of this work establish that quasiperiodic behaviour can only be guaranteed for long driving times and for those irrational numbers that have poor rational approximations. The final chapter presents the work performed at the National Physical Laboratory on the rubidium atomic fountain in order to measure the rubidium-87 ground-state hyperfine splitting frequency. This work led to a publication [57] and subsequent redefinition [7] of the official value based on those measurements.
In this thesis, detailed experimental studies and numerical simulations are presented of laser cooling mechanisms in dissipative optical lattices and results of the first realized three dimensional Brownian motor in optical lattices. A dissipative optical lattice is a periodic light shift potential, created in the interference patterns of laser beams. In this, atoms can be both cooled and trapped, and the most important relaxation mechanism is generally considered to be “Sisyphus cooling”. However, careful experimental and theoretical investigations indicate the presence of other cooling processes as well. This is studied by varying different parameters such as irradiance and frequency of the lattice light. The time evolution of atoms in optical lattices show strong evidence of a bimodal velocity distribution, where a population transfer between one mode containing “hot” atoms and one mode containing “cold” atoms is evident. The normal diffusion of atoms in optical lattices is characterized by isotrop random fluctuations and exhibit the nature of Brownian motion. We have realized a technique where this motion is rectified and controlled. This is done in a three dimensional double optical lattice. This Brownian motor has control properties for both its speed and its direction in three dimensions. Our three dimensional double optical lattice is created by using laser light, exploiting two transitions, in the D2 line of cesium. Two three dimensional optical lattices are spatially overlapped; each optical lattice traps atoms in one of two hyperfine ground states. The controllability comes about by inducing phase shifts in the lattice laser beams, which displace the lattices relative to each other. This type of highly controlled Brownian motor is of fundamental interest since Brownian motion is present in almost all systems and for the role they play in protein motors and the function of living cells, and for the potential applications in nanotechnology. Brownian motors of this kind also open the way to possible studies of quantum Brownian motors and quantum resonances that are predicted for atomic ratchets. Optical lattices, and especially double optical lattices, have also been suggested as a platform for quantum state manipulations due to the good isolation from environment and ambient effects. Most of the work in this thesis is a first step towards the implementation of quantum manipulation schemes in a double optical lattice.
Ratchets are devices that operate away from thermal equilibrium and can rectify zero-mean perturbations to achieve directed transport. We implement a ratchet system by using cold atoms in a driven optical lattice. This ratchet system can be precisely controlled experimentally, by adjusting either the driving parameters or the characteristics of the optical lattice. Directed transport in our ratchet is caused by rectification of either the driving force or fluctuations. We demonstrate under which conditions these types of rectification occur. Rectification of the driving force is a deterministic process, while rectification of fluctuations implies that the atoms act as Brownian motors. We show that resonant activation is the underlying mechanism of operation of these Brownian motors. The ratchet transport is controlled by symmetries of the system. The temporal symmetry of the system is normally broken by a time- asymmetric driving force. Here we show that for a system with symmetric driving and a symmetric potential, directed transport can also be caused by dissipation-induced breaking of time-reversal symmetry. This happens in the limit of small driving amplitude and large dissipation. We also study quasiperiodic driving of a cold atom ratchet and examine the relationship between symmetries and transport in this case. When mapping the route to quasiperiodicity we find a characteristic peak spectrum with transport occurring for certain ratios of frequencies. We characterize these peaks spectroscopically, and conclude that their shape is determined by the duration of driving. Finally, we investigate the coherency of transport with quasiperiodic driving and find large coherencies for certain driving parameters.
A complete laser cooling setup was built, with focus on threedimensional near-resonant optical lattices for cesium. These consist of regularly ordered micropotentials, created by the interference of four laser beams. One key feature of optical lattices is an inherent ”Sisyphus cooling” process. It efficiently extracts kinetic energy from the atoms, leading to equilibrium temperatures of a few µK. The corresponding kinetic energy is lower than the depth of the potential wells, so that atoms can be trapped. We performed detailed studies of the cooling processes in optical lattices by using the time-of-flight and absorption-imaging techniques. We investigated the dependence of the equilibrium temperature on the optical lattice parameters, such as detuning, optical potential and lattice geometry. The presence of neighbouring transitions in the cesium hyperfine level structure was used to break symmetries in order to identify, which role “red” and “blue” transitions play in the cooling. We also examined the limits for the cooling process in optical lattices, and the possible difference in steady-state velocity distributions for different directions. Moreover, in collaboration with ´Ecole Normale Sup´erieure in Paris, numerical simulations were performed in order to get more insight in the cooling dynamics of optical lattices. Optical lattices can keep atoms almost perfectly isolated from the environment and have therefore been suggested as a platform for a host of possible experiments aimed at coherent quantum manipulations, such as spin-squeezing and the implementation of quantum logic-gates. We developed a novel way to trap two different cesium ground states in two distinct, interpenetrating optical lattices, and to change the distance between sites of one lattice relative to sites of the other lattice. This is a first step towards the implementation of quantum simulation schemes in optical lattices.
Brownian motors, or ratchets, are devices which "rectify" Brownian motion, i.e. they can generate a current of particles out of unbiased fluctuations. The ratchet effect is a very general phenomenon which applies to a wide range of physical systems, and indeed ratchets have been realized with a variety of solid state devices, with optical trap setups as well as with synthetic molecules and granular gases. The present article reviews recent experimental realizations of ac driven ratchets with cold atoms in driven optical lattices. This is quite an unusual system for a Brownian motor as there is no a real thermal bath, and both the periodic potential for the atoms and the fluctuations are determined by laser fields. Such a system allowed us to realize experimentally rocking and gating ratchets, and to precisely investigate the relationship between symmetry and transport in these ratchets, both for the case of periodic and quasiperiodic driving.
This thesis includes both experimental and theoretical investigations of fluctuation-induced transport phenomena, presented in a series of nine papers, by studies of the dynamics of cold atoms in dissipative optical lattices. With standard laser cooling techniques about 108 cesium atoms are accumulated, cooled to a few μK, and transferred into a dissipative optical lattice. An optical lattice is a periodic light-shift potential, and in dissipative optical lattice the light field is sufficiently close to resonance for incoherent light scattering to be of importance. This provides the system with a diffusive force, but also with a friction through laser cooling mechanisms. In the dissipative optical lattices the friction and the diffusive force will eventually reach a steady state. At steady state, the thermal energy is low enough, compared to the potential depth, for the atoms to be localized close to the potential minima, but high enough for the atoms to occasionally make inter-well flights. This leads to a Brownian motion of the atoms in the optical lattices. In the normal case these random walks average to zero, leading to a symmetric, isotropic diffusion of the atoms. If the optical lattices are tilted, the symmetry is broken and the diffusion will be biased. This leads to a fluctuation-induced drift of the atoms. In this thesis an investigation of such drifts, for an optical lattice tilted by the gravitational force, is presented. We show that even though the tilt over a potential period is small compared to the potential depth, it clearly affect the dynamics of the atoms, and despite the complex details of the system it can, to a good approximation, be described by the Langevin equation formalism for a particle in a periodic potential. The linear drifts give evidence of stop-and-go dynamics where the atoms escape the potential wells and travel over one or more wells before being recaptured. Brownian motors open the possibility of creating fluctuation-induced drifts in the absence of bias forces, if two requirements are fulfilled: the symmetry has to be broken and the system has to be brought out of thermal equilibrium. By utilizing two distinguishable optical lattices, with a relative spatial phase and unequal transfer rates between them, these requirements can be fulfilled. In this thesis, such a Brownian motor is realized, and drifts in arbitrary directions in 3D are demonstrated. We also demonstrate a real-time steering of the transport as well as drifts along pre-designed paths. Moreover, we present measurements and discussions of performance characteristics of the motor, and we show that the required asymmetry can be obtained in multiple ways.