Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Communications Letters

Nonbinary Quasi-Regular QC-LDPC Codes Derived From Cycle Codes

Wojciech Sułek

Published Jun 23, 2016• 7 citations
Publisher

Abstract

Nonbinary ultra sparse codes, particularly regular cycle codes, are known to approach Shannon-limit performance as the Galois field GF(q) order is sufficiently large. Good cycle codes can result from a class of algebraically defined graphs called cages. Meanwhile, when smaller q is desirable, the cycle codes are outperformed by quasi-regular codes. In this letter, we propose a code construction method that takes a cage as a starting point and then progressively inserts a few additional edges into the graph. The edge insertion is terminated as soon as the code performance stops improving. Our simulation results show that the obtained quasi-regular codes outperform cyclic codes for fields up to GF(64) and its performance is slightly better than the quasi-regular improved-Progressive Edge Growth-based codes. The proposed algorithm preserves the block-circulant structure of the initial cage-based graph; therefore, it can be used for structured or quasi-cyclic codes design.

DOI
10.1109/lcomm.2016.2584069

Related papers

Quasi-Cyclic Low-Density Parity-Check Codes Based on Progressive Cycle Growth Algorithm

Yuanhua Liu, Meiling Zhang, Niu Xin-Liang

Short cycles in the Tanner graph of a given LDPC code has negative effect on the performance of iterative decoding. To improve the performance, we presented an approach for constructing Quasi-Cyclic Low-Density Parity-Check (QC-LDPC) codes whose associated Tanner graph has large girth and a small amount of short cycles. Each column block of the parity check matrix was designed by adding circulant permutation sub-matrices one after another, provided the current parity check matrix has minimal number of short cycles. The condition for the proposed QC-LDPC codes to have girth at least 6 was also analyzed. Regular and irregular QC-LDPC codes with various lengths and rates can be constructed. Simulations show that the proposed QC-LDPC codes have less short cycles and better performance than existing progressive edge growth based QC-LDPC codes.

International Conference on Instrumentation and Measurement, Computer, Communication and Control (IMCCC)•Jul 1, 2016•1 citation

The design of structured LDPC codes with algorithmic graph construction

Wojciech Sułek

Low-Density Parity-Check (LDPC) codes are among the most effective modern error-correcting codes due to their excellent correction performance and highly parallel decoding scheme. Moreover, the nonbinary extension of such codes further increases performance in the short-block regime. In this paper, we review the key elements for the construction of implementation-oriented binary and nonbinary codes. These Quasi-Cyclic LDPC (QC-LDPC) codes additionally feature efficient encoder and decoder implementation frameworks. We then present a versatile algorithm for the construction of both binary and nonbinary QC-LDPC codes that have low encoding complexity and an optimized corresponding graph structure. Our algorithm uses a progressive edge growth algorithm, modified for QC-LDPC graph construction, and then performs an iterative global search for optimized cyclic shift values within the QC-LDPC circulants. Strong error correction performance is achieved by minimizing the number of short cycles, and cycles with low external connectivity, within the code graph. We validate this approach via error rate simulations of a transmission system model featuring an LDPC coder-decoder, digital modulation, and additive white Gaussian noise channels. The obtained numerical results validate the effectiveness of the proposed construction algorithm, with a number of constructed codes exhibiting either similar or superior performance to industry standard binary codes and selected nonbinary codes from the literature.

Bulletin of the Polish Academy of Sciences Technical Sciences•May 30, 2022•0 citations

An improved algorithm for constructing QC-LDPC codes based on the PEG algorithm

Zhiyong Fan, Weibo Zhang, Xingcheng Liu +1 more

The Progressive edge-growth (PEG) algorithm was proven to be a simple and effective approach in designing Low-density parity-check (LDPC) codes. However, the Tanner graph constructed with the PEG algorithm is non-structured, which leads to random distributions of the positions of 1's in the corresponding parity-check matrix. In this paper, an improved algorithm based on the PEG algorithm for constructing quasi-cyclic (QC) LDPC codes is proposed. The proposed algorithm can eliminate short cycles efficiently and gain low error-floors. What is more important, the proposed QC-LDPC codes construction method is hardware-friendly because of its quasi-cyclic structure. Our simulation results demonstrate that the codes constructed with the proposed algorithm has better performance than the PEG algorithm over the additive white Gaussian noise (AWGN) channel and Rayleigh flat fading channel.

International Conference on Communications and Networking in China (ChinaCom)•Aug 1, 2009•5 citations

Quasi-cyclic LDPC codes based on D and Q matrices through progressive edge growth

Wei Zhan, Guangxi Zhu, Li Peng +1 more

We propose a general method for constructing regular and irregular quasi-cyclic LDPC codes based on the modified PEG (progressive edge growth) graph. The idea of permutation vector is introduced. Through permutation vectors, the QC-LDPC codes based on arbitrary circulant permutation matrices, which are not limited to identity matrix, Q-matrix or D-matrix, can be generated with flexible parameters such as block length, code rate, degree distribution. Simulation results demonstrate that QC-LDPC codes using the new PEG algorithm show an error correction performance comparable to the random LDPC codes based on the traditional PEG algorithm. In addition, the PEG QC-LDPC codes have more hardware-friendly parity check matrices than the random PEG LDPC codes and can fulfill linear-time encoding. The QC-LDPC codes based on D-matrix and Q-matrix are more suitable to be used in QC-LDPC codes than identity matrix because they outperform that of identity matrix by 0.1-0.2 dB in the new PEG algorithm.

International Symposium on Intelligent Signal Processing and Communication Systems (ISPACS)•Jan 1, 2007•8 citations

A class of good quasi-cyclic low-density parity check codes based on progressive edge growth graph

Zongwang Li, B. V. K. Vijaya Kumar

We present a new class of quasi-cyclic low density parity check (QC-LDPC) codes, whose quasi-cyclic nature makes them attractive for implementation. Both regular and irregular QC-LDPC codes are designed by modifying the progressive edge growth (PEG) graph with a quasi-cyclic constraint. Simulations show that these QC-LDPC codes offer hardware-friendly parity check matrices and have as good error correction performance as random LDPC codes and other good QC-LDPC codes. In addition, the proposed QC-LDPC codes offer a much more flexible set of parameters compared to the traditional designs.

Asilomar Conference on Signals, Systems and Computers (ACSSC)•Mar 31, 2005•141 citations

Construction of Structured Nonbinary Low-Density Parity-Check Codes

Wojciech Sułek

Low Density Parity Check (LDPC) codes over nonbinary Galois Fields GF(q) are a generalization of the industrial standard binary LDPC codes for forward error correction in communication and information systems.The nonbinary codes can achieve significantly better performance for short and moderate block lengths.A lot of works concerning "good" LDPC codes parity check matrix construction has been published so far.However, it is well known that efficient partially parallel hardware decoder architectures are allowed only for codes with blockwise partitioned structure of the parity check matrix, called structured codes.In this paper we present a versatile algorithm for construction of codes that are both nonbinary and structured.The proposed algorithm aims at optimizing the code graph (Tanner graph) by reducing the existence of small cycles with low external connectivity, while at the same time selecting appropriate nonzero coefficients from the Galois Field under interest.The algorithm can be used for code construction of any field order, block length and code rate.

International Journal of e-Education e-Business e-Management and e-Learning•Jan 1, 2013•0 citations
Nonbinary ultra sparse codes, particularly regular cycle codes, are known to approach Shannon-limit performance as the Galois field GF(q) order is sufficiently large. Good cycle codes can result from a class of algebraically defined graphs called cages. Meanwhile, when smaller q is desirable, the cycle codes are outperformed by quasi-regular codes. In this letter, we propose a code construction method that takes a cage as a starting point and then progressively inserts a few additional edges into the graph. The edge insertion is terminated as soon as the code performance stops improving. Our simulation results show that the obtained quasi-regular codes outperform cyclic codes for fields up to GF(64) and its performance is slightly better than the quasi-regular improved-Progressive Edge Growth-based codes. The proposed algorithm preserves the block-circulant structure of the initial cage-based graph; therefore, it can be used for structured or quasi-cyclic codes design.
Short cycles in the Tanner graph of a given LDPC code has negative effect on the performance of iterative decoding. To improve the performance, we presented an approach for constructing Quasi-Cyclic Low-Density Parity-Check (QC-LDPC) codes whose associated Tanner graph has large girth and a small amount of short cycles. Each column block of the parity check matrix was designed by adding circulant permutation sub-matrices one after another, provided the current parity check matrix has minimal number of short cycles. The condition for the proposed QC-LDPC codes to have girth at least 6 was also analyzed. Regular and irregular QC-LDPC codes with various lengths and rates can be constructed. Simulations show that the proposed QC-LDPC codes have less short cycles and better performance than existing progressive edge growth based QC-LDPC codes.
Low-Density Parity-Check (LDPC) codes are among the most effective modern error-correcting codes due to their excellent correction performance and highly parallel decoding scheme. Moreover, the nonbinary extension of such codes further increases performance in the short-block regime. In this paper, we review the key elements for the construction of implementation-oriented binary and nonbinary codes. These Quasi-Cyclic LDPC (QC-LDPC) codes additionally feature efficient encoder and decoder implementation frameworks. We then present a versatile algorithm for the construction of both binary and nonbinary QC-LDPC codes that have low encoding complexity and an optimized corresponding graph structure. Our algorithm uses a progressive edge growth algorithm, modified for QC-LDPC graph construction, and then performs an iterative global search for optimized cyclic shift values within the QC-LDPC circulants. Strong error correction performance is achieved by minimizing the number of short cycles, and cycles with low external connectivity, within the code graph. We validate this approach via error rate simulations of a transmission system model featuring an LDPC coder-decoder, digital modulation, and additive white Gaussian noise channels. The obtained numerical results validate the effectiveness of the proposed construction algorithm, with a number of constructed codes exhibiting either similar or superior performance to industry standard binary codes and selected nonbinary codes from the literature.
The Progressive edge-growth (PEG) algorithm was proven to be a simple and effective approach in designing Low-density parity-check (LDPC) codes. However, the Tanner graph constructed with the PEG algorithm is non-structured, which leads to random distributions of the positions of 1's in the corresponding parity-check matrix. In this paper, an improved algorithm based on the PEG algorithm for constructing quasi-cyclic (QC) LDPC codes is proposed. The proposed algorithm can eliminate short cycles efficiently and gain low error-floors. What is more important, the proposed QC-LDPC codes construction method is hardware-friendly because of its quasi-cyclic structure. Our simulation results demonstrate that the codes constructed with the proposed algorithm has better performance than the PEG algorithm over the additive white Gaussian noise (AWGN) channel and Rayleigh flat fading channel.
We propose a general method for constructing regular and irregular quasi-cyclic LDPC codes based on the modified PEG (progressive edge growth) graph. The idea of permutation vector is introduced. Through permutation vectors, the QC-LDPC codes based on arbitrary circulant permutation matrices, which are not limited to identity matrix, Q-matrix or D-matrix, can be generated with flexible parameters such as block length, code rate, degree distribution. Simulation results demonstrate that QC-LDPC codes using the new PEG algorithm show an error correction performance comparable to the random LDPC codes based on the traditional PEG algorithm. In addition, the PEG QC-LDPC codes have more hardware-friendly parity check matrices than the random PEG LDPC codes and can fulfill linear-time encoding. The QC-LDPC codes based on D-matrix and Q-matrix are more suitable to be used in QC-LDPC codes than identity matrix because they outperform that of identity matrix by 0.1-0.2 dB in the new PEG algorithm.
We present a new class of quasi-cyclic low density parity check (QC-LDPC) codes, whose quasi-cyclic nature makes them attractive for implementation. Both regular and irregular QC-LDPC codes are designed by modifying the progressive edge growth (PEG) graph with a quasi-cyclic constraint. Simulations show that these QC-LDPC codes offer hardware-friendly parity check matrices and have as good error correction performance as random LDPC codes and other good QC-LDPC codes. In addition, the proposed QC-LDPC codes offer a much more flexible set of parameters compared to the traditional designs.
Low Density Parity Check (LDPC) codes over nonbinary Galois Fields GF(q) are a generalization of the industrial standard binary LDPC codes for forward error correction in communication and information systems.The nonbinary codes can achieve significantly better performance for short and moderate block lengths.A lot of works concerning "good" LDPC codes parity check matrix construction has been published so far.However, it is well known that efficient partially parallel hardware decoder architectures are allowed only for codes with blockwise partitioned structure of the parity check matrix, called structured codes.In this paper we present a versatile algorithm for construction of codes that are both nonbinary and structured.The proposed algorithm aims at optimizing the code graph (Tanner graph) by reducing the existence of small cycles with low external connectivity, while at the same time selecting appropriate nonzero coefficients from the Galois Field under interest.The algorithm can be used for code construction of any field order, block length and code rate.