Rubidium MOT and Experimental Procedures

H. Münz, Ivan Mistrík, Hanspeter Helm

Marcin Witkowski, Sławomir Bilicki, Bartłomiej Nagórny +5 more

We present an experimental set-up of two species mercury-rubidium magneto-optical trap (MOT). The preliminary studies of interactions in mercury MOT and mercury-rubidium MOT are presented. In bosons with the s2 configuration the clock transition 1S0-3P0 is strictly forbidden. The commonly used method to overcome this problem is to induce a coupling with 3P0 state with a state which is optically accessible. In the mercury-rubidium MOT, the presence of cold Rb atoms might be used to tune the probability of the 1S0-3P0 clock transition in mercury.

Jay E. Sharping

Huzifa Mohammed Ahamed Mohammed Elnour

ENGLISH ABSTRACT: A Magneto Optical Trap (MOT) is a configuration formed by three orthogonal pairs of counterpropagating circularly polarized laser beams and a magnetic field gradient. A MOT is used to cool, capture and trap large numbers of atoms in vacuum at very low temperature in K range. In this thesis the development of an experimental setup for realising a MOT of 87Rb atoms is presented. The atomic structure of Rb and the theoretical background of laser cooling and magneto optical trapping was reviewed. The influence of rubidium background pressure in the vacuum system, the laser beam size and the power and frequency on the number of the trapped atoms were studied in literature. The trapping and repumping lasers were characterised experimentally. Six circularly polarised trapping beams with equal power were formed and properly aligned to intersect at the center of the trapping cell. Two optical setups were designed and exploited to investigate and optimise the trapping beam polarisation. The repumping laser beam was successfully aligned and colinearly combined into all the trapping beams. Three different experimental setups for saturated absorption spectroscopy were developed. Saturated absorption spectra showing the hyperfine structure of both 85Rb and 87Rb isotopes were measured and are discussed. Using two saturated absorption spectroscopy setups, the frequencies of both lasers were successfully locked to the trapping and repumping transitions of 87Rb respectively. A rectangular trapping cell was designed and attached to the vacuum system. A pressure of about 10­¯7 mbar was achieved. The magnetic field coils were characterised and affixed on both sides of the cell in an anti-Helmholtz configuration. Setups for imaging and quantification of the 87Rb atoms in the MOT were designed. Finally, the procedures for demonstrating a MOT are presented. In conclusion, the current status of the project is reported, with recommendations for the future work.

L. N. Goeller

Magnus A. Haw, N. Evetts, Will Gunton +3 more

We study the dependence of the particle loading rate of a rubidium vapor cell magneto-optic trap (MOT). Using a trap depth determination of the MOT that relies on measurements of loss rates during optical excitation of colliding atoms to a repulsive molecular state, we experimentally determine the MOT escape velocity and show that the loading rate scales with escape velocity to the fourth power, or, equivalently, with the square of the trap depth. We also demonstrate that the loading rate is directly proportional to the background rubidium density. We thus experimentally confirm the loading rate model used in the literature since the invention of the MOT. In addition to confirming this long-standing conjecture, we show that the loading rate dependence can be used to reliably infer the trap depth and to tune the relative depth of a MOT (i.e., capture and escape velocities) when the background density is held fixed. The measurements have allowed an experimental determination of the relationship between capture and escape velocities in our MOTs of vc=1.29(0.12)ve.