We propose a quantum absorption refrigerator driven by photons. The model uses a four-level system as its working substance and couples simultaneously to hot, cold, and solar heat reservoirs. Explicit expressions for the cooling power Q̇(c) and coefficient of performance (COP) η(COP) are derived, with the purpose of revealing and optimizing the performance of the device. Our model runs most efficiently under the tight coupling condition, and it is consistent with the third law of thermodynamics in the limit T→0.
We propose a quantum absorption refrigerator driven by photons. The model uses a four-level system as its working substance and couples simultaneously to hot, cold, and solar heat reservoirs. Explicit expressions for the cooling power Q̇(c) and coefficient of performance (COP) η(COP) are derived, with the purpose of revealing and optimizing the performance of the device. Our model runs most efficiently under the tight coupling condition, and it is consistent with the third law of thermodynamics in the limit T→0.
A quantum absorption refrigerator driven by noise is studied with the purpose of determining the limitations of cooling to absolute zero. The model consists of a working medium coupled simultaneously to hot, cold, and noise baths. Explicit expressions for the cooling power are obtained for Gaussian and Poisson white noise. The quantum model is consistent with the first and second laws of thermodynamics. The third law is quantified; the cooling power J(c) vanishes as J(c) ∝ T(c)(α), when T(c)→0, where α=d+1 for dissipation by emission and absorption of quanta described by a linear coupling to a thermal bosonic field, where d is the dimension of the bath.
Absorption refrigerators transfer thermal energy from a cold reservoir to a hot reservoir using input energy from a third, so-called work reservoir. We examine the operation of quantum absorption refrigerators when coherences between eigenstates survive in the steady state limit. In our model, the working medium comprises a discrete, four-level system. Several studies on related setups have demonstrated the performance-enhancing potential of steady-state eigenbasis quantum coherences. By contrast, in our model such coherences generally quench the cooling current in the refrigerator, while minimally affecting the coefficient of performance (cooling efficiency). We rationalize the behavior of the four-level refrigerator by studying three-level model systems for energy transport and refrigeration. Our calculations further illuminate the shortcomings of secular quantum master equations and the necessity of employing dynamical equations of motion that retain couplings between population and coherences.
The study of nanoscopic thermal devices attracts an increasing attention, not only because of their key role in understanding the emergence of thermodynamics from quantum theory, but also for the potential use of quantum-mechanical thermal cycles, especially refrigerators, in quantum technologies. This thesis, is devoted to the performance optimization of autonomous (heat-driven) refrigerators. For a quantum refrigerator, one has a full microscopic description of the simple system serving as a working medium, and of its interaction with the external heat baths. This enables a consistent `finite-time? thermodynamic analysis, not relying on any phenomenological assumptions about the leading sources of irreversibility, and allows to establish arguably general performance bounds, essential to benchmark the operation of realistic devices. In particular, tight and model-independent upper bounds for the coefficient of performance at maximum power, are derived here for a class of strongly coupled refrigerators, and seen to hold more generally for other types of heat and power-driven cycles. Remarkably, these ultimate limitations only depend on the particulars of the system-baths interaction at the interface with the object to be cooled. Strategies might be then defined so as to saturate those limits: It is shown how the working medium of the refrigerator may be, for instance, scaled up into a parallel multi-stage configuration, resembling that of macroscopic multi-effect absorption chillers, as a means to increase its cooling power. Similarly, by applying reservoir engineering techniques on selected transitions between the energy states of the working medium, one can mimic exploitable non-equilibrium fluctuations in the baths, capable of boosting the overall power and COP beyond what would be otherwise allowed by the second law of thermodynamics. In this way, heat-driven chillers could be set to compete on a equal footing with the best power-driven refrigerators.
The rate of temperature decrease of a cooled quantum bath is studied as its temperature is reduced to absolute zero. The third law of thermodynamics is then quantified dynamically by evaluating the characteristic exponent ζ of the cooling process dT(t)/dt∼-T^{ζ} when approaching absolute zero, T→0. A continuous model of a quantum refrigerator is employed consisting of a working medium composed either by two coupled harmonic oscillators or two coupled two-level systems. The refrigerator is a nonlinear device merging three currents from three heat baths: a cold bath to be cooled, a hot bath as an entropy sink, and a driving bath which is the source of cooling power. A heat-driven refrigerator (absorption refrigerator) is compared to a power-driven refrigerator. When optimized, both cases lead to the same exponent ζ, showing a lack of dependence on the form of the working medium and the characteristics of the drivers. The characteristic exponent is therefore determined by the properties of the cold reservoir and its interaction with the system. Two generic heat bath models are considered: a bath composed of harmonic oscillators and a bath composed of ideal Bose/Fermi gas. The restrictions on the interaction Hamiltonian imposed by the third law are discussed. In the Appendices, the theory of periodically driven open systems and its implication for thermodynamics are outlined.
We study the optimal performance of a three-level quantum refrigerator using two different objective functions: cooling power and χ function. For both cases, we obtain general expressions for the coefficient of performance (COP) and derive its well-known lower and upper bounds for the limiting cases when the ratio of system-bath coupling constants at the hot and cold contacts approaches infinity and zero, respectively. We also show that the cooling power can be maximized with respect to one control frequency, while χ function can be maximized globally with respect to two control frequencies. Additionally, we show that in the low-temperature regime, our model of refrigerator can be mapped to Feynman's ratchet and pawl model, a classical mesoscopic heat engine. In the parameter regime where both cooling power and χ function can be maximized, we compare the cooling power of the quantum refrigerator at maximum χ function with the maximum cooling power.
Quantum thermodynamics supplies a consistent description of quantum heat engines and refrigerators up to a single few-level system coupled to the environment. Once the environment is split into three (a hot, cold, and work reservoir), a heat engine can operate. The device converts the positive gain into power, with the gain obtained from population inversion between the components of the device. Reversing the operation transforms the device into a quantum refrigerator. The quantum tricycle, a device connected by three external leads to three heat reservoirs, is used as a template for engines and refrigerators. The equation of motion for the heat currents and power can be derived from first principles. Only a global description of the coupling of the device to the reservoirs is consistent with the first and second laws of thermodynamics. Optimization of the devices leads to a balanced set of parameters in which the couplings to the three reservoirs are of the same order and the external driving field is in resonance. When analyzing refrigerators, one needs to devote special attention to a dynamical version of the third law of thermodynamics. Bounds on the rate of cooling when Tc→0 are obtained by optimizing the cooling current. All refrigerators as Tc→0 show universal behavior. The dynamical version of the third law imposes restrictions on the scaling as Tc→0 of the relaxation rate γc and heat capacity cV of the cold bath.