Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

A novel magneto optical trap for integrated atom chips

Joseph Rushton

Published Jul 1, 2015• 2 citations
OpenAlex

Abstract

This thesis describes the design and construction of a new magneto optical trap that is suitable for use in integrated atom chips and other vacuum systems in which optical access is limited to a single window. The trap design relies on the switching of optical and magnetic fields and can operate at frequencies at least within the region of 1 kHz to 60 kHz. The design does not need patterned surfaces in order to generate the necessary beam geometry, requiring only the use of a single, standard mirror. Early temperature measurements have indicated that the trap may be capable of sub-Doppler cooling, and that it is able to capture on the order of 1.7 x 106 atoms in a capture volume of 0.18 cm3.

Related papers

A dynamic magneto-optical trap for atom chips

Jo Rushton, Ritayan Roy, James Bateman +1 more

We describe a dynamic magneto-optical trap (MOT) suitable for the use with vacuum systems in which optical access is limited to a single window. This technique facilitates the long-standing desire of producing integrated atom chips, many of which are likely to have severely restricted optical access compared with conventional vacuum chambers. This 'switching-MOT' relies on the synchronized pulsing of optical and magnetic fields at audio frequencies. The trap's beam geometry is obtained using a planar mirror surface, and does not require a patterned substrate or bulky optics inside the vacuum chamber. Central to the design is a novel magnetic field geometry that requires no external quadrupole or bias coils which leads toward a very compact system. We have implemented the trap for 85 Rb and shown that it is capable of capturing 2 million atoms and directly cooling below the Doppler temperature.

arXiv:1607.08662•New Journal of Physics•Nov 9, 2016•5 citations

A misaligned magneto-optical trap to enable miniaturized atom chip systems

Ritayan Roy, Jo Rushton, Andrei Dragomir +2 more

Abstract We describe the application of displaced, or misaligned, beams in a mirror-based magneto-optical trap (MOT) to enable portable and miniaturized atom chip experiments where optical access is limited to a single window. Two different geometries of beam displacement are investigated: a variation on the well-known ‘vortex-MOT’, and the other a novel ‘hybrid-MOT’ combining Zeeman-shifted and purely optical scattering force components. The beam geometry is obtained similar to the mirror-MOT, using a planar mirror surface but with a different magnetic field geometry more suited to planar systems. Using these techniques, we have trapped around 6 × 106 and 26 × 106 atoms of 85Rb in the vortex-MOT and hybrid-MOT respectively. For the vortex-MOT the atoms are directly cooled well below the Doppler temperature without any additional sub-Doppler cooling stage, whereas the temperature of the hybrid-MOT has been measured slightly above the Doppler temperature limit. In both cases the attained lower temperature ensures the quantum behaviour of the trapped atoms required for the applications of portable quantum sensors and many others.

arXiv:1802.05525•Scientific Reports•Jun 28, 2018•3 citations

Towards an integrated atom chip

G. Lewis

The field of atom chips is a relatively new area of research which is rapidly becoming of great interest to the scientific community. It started out as a small branch of cold atom physics which has quickly grown into a multidisciplinary\nsubject. It now encompasses topics from fundamental atomic and quantum theory, optics and laser science, to the engineering of ultra sensitive sensors.\n\nIn this thesis the first steps are taken towards a truly integrated atom chip device for real world applications. Multiple devices are presented that allow the trapping, cooling, manipulation and counting of atoms. Each device presents a new component required for the integration and miniaturisation of atom chips\ninto a single device, capable of being used as a sensor.\n\nInitially, a wire trap was created capable of trapping and splitting a cloud of BoseEinstein condensate (BEC) for use in atom interferometry. Using this chip a BEC has been successfully created, trapped and coherent splitting of this cloud has been achieved.\n\nSubsequently, the integration and simplification of the initial trapping process was approached. In all the experiments to date, atoms are initially collected from a warm vapour by a magneto-optical trap (MOT). This thesis presents a new approach in which microscopic pyramidal MOTs’ are integrated into the chip itself. This greatly reduces the number of optical components and helps to simplify the process significantly.\n\nAlso presented is a method for creating a planar-concave micro-cavity capable of single atom detection. One such cavity consists of a concave mirror fabricated in silicon and the planar tip of an optical fibre. The performance of the resonators\nis highly dependent on the surface roughness and shape profile of the concave mirrors therefore a detailed study into the fabrication technique and its effects on these parameters was undertaken. Using such cavities single atom detection has been shown to be possible. These cavities have also been sccessfully integrated into an atom wire guide.\n\nFinally a co-sputtered amorphous silicon/titanium (a-Si/Ti) nanocomposite material was created and studied for its use as a novel structural material. This material is potentially suitable for integrated circuitry (IC)/Micro-electromechanical-\nsystems (MEMS) integration. The material’s electrical and\nstructural properties were investigated and initial results suggest that a-Si/Ti has the potential to be a compelling structural material for future IC/MEMS integration.\n\nTo build all of these devices, a full range of standard microfabrication techniques was necessary as well as some non standard processes that required considerable process development such as the electrochemical deposition.\n\nThis thesis presents a tool box of fabrication techniques for creating various components capable of different tasks that can be integrated into a single device. Each component has been successfully demonstrated in laboratory conditions. This represents a significant step toward a real world atom chip device.

•Mar 1, 2009•0 citations

Magneto-optical traps on a chip using micro-fabricated gratings

C. C. Nshii, Matthieu Vangeleyn, Joseph P. Cotter +7 more

We have made magneto-optical traps (MOTs) on a chip which is able to cool and trap ~108atoms directly from a ~1cm3thermal background of87Rb. Diffraction gratings are used to manipulate the light from a single input beam to create the beams required for a MOT [1,2]. The gratings are etched into the surface of a silicon or GaAs wafer by either electron beam, or photo-lithography making them simple to fabricate and integrate into other atom chip architectures. We have developed a variety of gratings for utilisation both inside and outside a vacuum chamber - facilitating their incorporation into both new and existing devices. Unlike previously integrated cold atom sources on a chip [3,4] the atoms now sit above the surface where they can be easily imaged, manipulated and transferred into other on-chip potentials.

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)•May 1, 2013•0 citations

A Magneto-optical Trap Below a Dielectric Coated Mirror Surface

Hoon Yu, Lim Lee, Kyung Hyun Lee +1 more

A Magneto-Optical Trap (MOT) for $^{87}Rb$ atoms near the surface of a dielectric coated mirror at the top of a small $20{\times}25{\times}40\;mm^3$ cell has been observed. Two beams of $3.3\;mW/cm^2$ were used for optical cooling and an anti-Helmholtz magnetic field with a spatial gradient of 9.1 G/cm was used for magnetic trapping. The thickness of the mirror coated on a cover glass was less than $100{\mu}m$ . The mirror covered the top of a cell and the atom-chip was located outside the vacuum in order to exploit the long life time of the mirror and easy operation of the chip. The trapping position was found 5 mm beneath the mirror surface. The number of trapped atoms was roughly $3{\times}10^7$ atoms and the temperature was approximately a few tens mK. In this paper, we describe the construction of the mirror-MOT in detail.

Journal of the Optical Society of Korea•Jun 25, 2009•9 citations

Hexapole-compensated magneto-optical trap on a mesoscopic atom chip

S. Jöllenbeck, J. Mahnke, R. Randoll +3 more

Magneto-optical traps on atom chips are usually restricted to small atomic samples due to a limited capture volume caused primarily by distorted field configurations. Here we present a magneto-optical trap based on a millimeter-sized wire structure which generates a magnetic field with minimized distortions. Together with the loading from a high-flux two-dimensional magneto-optical trap, we achieve a loading rate of $8.4\ifmmode\times\else\texttimes\fi{}{10}^{10}$ atoms/s and maximum number of $8.7\ifmmode\times\else\texttimes\fi{}{10}^{9}$ captured atoms. The wire structure is placed outside of the vacuum to enable a further adaptation to new scientific objectives. Since all magnetic fields are applied locally without the need for external bias fields, the presented setup will facilitate parallel generation of Bose-Einstein condensates on a conveyor belt with a cycle rate above $1$ Hz.

arXiv:1012.4321•Physical Review A•Apr 11, 2011•25 citations
This thesis describes the design and construction of a new magneto optical trap that is suitable for use in integrated atom chips and other vacuum systems in which optical access is limited to a single window. The trap design relies on the switching of optical and magnetic fields and can operate at frequencies at least within the region of 1 kHz to 60 kHz. The design does not need patterned surfaces in order to generate the necessary beam geometry, requiring only the use of a single, standard mirror. Early temperature measurements have indicated that the trap may be capable of sub-Doppler cooling, and that it is able to capture on the order of 1.7 x 106 atoms in a capture volume of 0.18 cm3.
We describe a dynamic magneto-optical trap (MOT) suitable for the use with vacuum systems in which optical access is limited to a single window. This technique facilitates the long-standing desire of producing integrated atom chips, many of which are likely to have severely restricted optical access compared with conventional vacuum chambers. This 'switching-MOT' relies on the synchronized pulsing of optical and magnetic fields at audio frequencies. The trap's beam geometry is obtained using a planar mirror surface, and does not require a patterned substrate or bulky optics inside the vacuum chamber. Central to the design is a novel magnetic field geometry that requires no external quadrupole or bias coils which leads toward a very compact system. We have implemented the trap for 85 Rb and shown that it is capable of capturing 2 million atoms and directly cooling below the Doppler temperature.
Abstract We describe the application of displaced, or misaligned, beams in a mirror-based magneto-optical trap (MOT) to enable portable and miniaturized atom chip experiments where optical access is limited to a single window. Two different geometries of beam displacement are investigated: a variation on the well-known ‘vortex-MOT’, and the other a novel ‘hybrid-MOT’ combining Zeeman-shifted and purely optical scattering force components. The beam geometry is obtained similar to the mirror-MOT, using a planar mirror surface but with a different magnetic field geometry more suited to planar systems. Using these techniques, we have trapped around 6 × 106 and 26 × 106 atoms of 85Rb in the vortex-MOT and hybrid-MOT respectively. For the vortex-MOT the atoms are directly cooled well below the Doppler temperature without any additional sub-Doppler cooling stage, whereas the temperature of the hybrid-MOT has been measured slightly above the Doppler temperature limit. In both cases the attained lower temperature ensures the quantum behaviour of the trapped atoms required for the applications of portable quantum sensors and many others.
The field of atom chips is a relatively new area of research which is rapidly becoming of great interest to the scientific community. It started out as a small branch of cold atom physics which has quickly grown into a multidisciplinary\nsubject. It now encompasses topics from fundamental atomic and quantum theory, optics and laser science, to the engineering of ultra sensitive sensors.\n\nIn this thesis the first steps are taken towards a truly integrated atom chip device for real world applications. Multiple devices are presented that allow the trapping, cooling, manipulation and counting of atoms. Each device presents a new component required for the integration and miniaturisation of atom chips\ninto a single device, capable of being used as a sensor.\n\nInitially, a wire trap was created capable of trapping and splitting a cloud of BoseEinstein condensate (BEC) for use in atom interferometry. Using this chip a BEC has been successfully created, trapped and coherent splitting of this cloud has been achieved.\n\nSubsequently, the integration and simplification of the initial trapping process was approached. In all the experiments to date, atoms are initially collected from a warm vapour by a magneto-optical trap (MOT). This thesis presents a new approach in which microscopic pyramidal MOTs’ are integrated into the chip itself. This greatly reduces the number of optical components and helps to simplify the process significantly.\n\nAlso presented is a method for creating a planar-concave micro-cavity capable of single atom detection. One such cavity consists of a concave mirror fabricated in silicon and the planar tip of an optical fibre. The performance of the resonators\nis highly dependent on the surface roughness and shape profile of the concave mirrors therefore a detailed study into the fabrication technique and its effects on these parameters was undertaken. Using such cavities single atom detection has been shown to be possible. These cavities have also been sccessfully integrated into an atom wire guide.\n\nFinally a co-sputtered amorphous silicon/titanium (a-Si/Ti) nanocomposite material was created and studied for its use as a novel structural material. This material is potentially suitable for integrated circuitry (IC)/Micro-electromechanical-\nsystems (MEMS) integration. The material’s electrical and\nstructural properties were investigated and initial results suggest that a-Si/Ti has the potential to be a compelling structural material for future IC/MEMS integration.\n\nTo build all of these devices, a full range of standard microfabrication techniques was necessary as well as some non standard processes that required considerable process development such as the electrochemical deposition.\n\nThis thesis presents a tool box of fabrication techniques for creating various components capable of different tasks that can be integrated into a single device. Each component has been successfully demonstrated in laboratory conditions. This represents a significant step toward a real world atom chip device.
We have made magneto-optical traps (MOTs) on a chip which is able to cool and trap ~108atoms directly from a ~1cm3thermal background of87Rb. Diffraction gratings are used to manipulate the light from a single input beam to create the beams required for a MOT [1,2]. The gratings are etched into the surface of a silicon or GaAs wafer by either electron beam, or photo-lithography making them simple to fabricate and integrate into other atom chip architectures. We have developed a variety of gratings for utilisation both inside and outside a vacuum chamber - facilitating their incorporation into both new and existing devices. Unlike previously integrated cold atom sources on a chip [3,4] the atoms now sit above the surface where they can be easily imaged, manipulated and transferred into other on-chip potentials.
A Magneto-Optical Trap (MOT) for 87Rb^{87}Rb87Rb atoms near the surface of a dielectric coated mirror at the top of a small 20×25×40  mm320{\times}25{\times}40\;mm^320×25×40mm3 cell has been observed. Two beams of 3.3  mW/cm23.3\;mW/cm^23.3mW/cm2 were used for optical cooling and an anti-Helmholtz magnetic field with a spatial gradient of 9.1 G/cm was used for magnetic trapping. The thickness of the mirror coated on a cover glass was less than 100μm100{\mu}m100μm . The mirror covered the top of a cell and the atom-chip was located outside the vacuum in order to exploit the long life time of the mirror and easy operation of the chip. The trapping position was found 5 mm beneath the mirror surface. The number of trapped atoms was roughly 3×1073{\times}10^73×107 atoms and the temperature was approximately a few tens mK. In this paper, we describe the construction of the mirror-MOT in detail.
Magneto-optical traps on atom chips are usually restricted to small atomic samples due to a limited capture volume caused primarily by distorted field configurations. Here we present a magneto-optical trap based on a millimeter-sized wire structure which generates a magnetic field with minimized distortions. Together with the loading from a high-flux two-dimensional magneto-optical trap, we achieve a loading rate of $8.4\ifmmode\times\else\texttimes\fi{}{10}^{10}$ atoms/s and maximum number of $8.7\ifmmode\times\else\texttimes\fi{}{10}^{9}$ captured atoms. The wire structure is placed outside of the vacuum to enable a further adaptation to new scientific objectives. Since all magnetic fields are applied locally without the need for external bias fields, the presented setup will facilitate parallel generation of Bose-Einstein condensates on a conveyor belt with a cycle rate above 111 Hz.