How to estimate the randomness of the measurement outcomes generated by a given device is an important issue in quantum information theory. Recently, Brunner et al. [Phys. Rev. Lett. 112 (2014) 140407] proposed a prepare-and-measure quantum random number generation scenario with device-independent assumption, which indicates a method to test the randomness of bit strings according to the generation process rather than the results. Based on this protocol, we implement a quantum random number generator with an intrinsic stable phase-encoded quantum key distribution system. The system has been continuously running for more than 200 h, a stable witness W with the average value of 0.9752 and a standard deviation of 0.0024 are obtained. More than 1 G random bits are generated and the results pass all items of NIST test suite.
How to estimate the randomness of the measurement outcomes generated by a given device is an important issue in quantum information theory. Recently, Brunner et al. [Phys. Rev. Lett. 112 (2014) 140407] proposed a prepare-and-measure quantum random number generation scenario with device-independent assumption, which indicates a method to test the randomness of bit strings according to the generation process rather than the results. Based on this protocol, we implement a quantum random number generator with an intrinsic stable phase-encoded quantum key distribution system. The system has been continuously running for more than 200 h, a stable witness W with the average value of 0.9752 and a standard deviation of 0.0024 are obtained. More than 1 G random bits are generated and the results pass all items of NIST test suite.
How to generate genuine quantum randomness from untrusted devices is an important problem in quantum information processing. Inspired by previous work on a self-testing quantum random number generator [T. Lunghi et al., Phys. Rev. Lett. 114, 150501 (2015)], we present a method to generate quantum randomness from a prepare-and-measure scenario with independent devices. In existing protocols, the quantum randomness depends only on a witness value (e.g., Clauser-Horne-Shimony-Holt value), which is calculated with the observed probabilities. Differently, here all the observed probabilities are directly used to calculate the min-entropy in our method. Through numerical simulation, we find that the min-entropy of our proposed scheme is higher than that in the previous work when a typical untrusted Bennett-Brassard 1984 (BB84) setup is used. Consequently, thanks to the proposed method, more genuine quantum random numbers may be obtained than before.
Quantum random number generation attracts considerable attention, since its randomness inherently originates in quantum mechanics, but not mathematical assumptions. Randomness certification, e.g. entropy estimation, becomes a key issue in the context of quantum random number generation protocol. We study a self-testing protocol based on dimension witness, with the assumption of independent devices. It addresses the random number extraction problem in a practical prepare-and-measure scenario with uncharacterized devices. However, the lower bound of min-entropy as a function of dimension witness is not tight in existing works. We present a tighter bound of analytic form, by introducing the Lagrangian multiplier method to closely analyze the optimization problem on average guessing probability. Through simulation, it turns out that a significantly higher random number generation rate can be achieved in practice.
Randomness is a very important resource for cryptography, algorithms, and scientific simulations. Since all classical processes are considered to be intrinsically deterministic, we must build quantum random number generators which utilize quantum processes to generate true randomness. Quantum random number generators have been realized in different quantum systems, including quantum optical systems, and trapped ions. Here we present a proof-of-concept random number generator based on a nuclear spin system for the first time. The state preparation and measurements are performed with high-fidelity operations in our system. The entropy of randomness in the experimental data is quantified by two dimension witness certification protocols, which require no detailed models to describe the experimental devices but only some general assumptions, such as the limited dimensionality and the independence of the experimental devices.
The generation of random numbers is a task of paramount importance in modern science. A central problem for both classical and quantum randomness generation is to estimate the entropy of the data generated by a given device. Here we present a protocol for self-testing quantum random number generation, in which the user can monitor the entropy in real time. Based on a few general assumptions, our protocol guarantees continuous generation of high quality randomness, without the need for a detailed characterization of the devices. Using a fully optical setup, we implement our protocol and illustrate its self-testing capacity. Our work thus provides a practical approach to quantum randomness generation in a scenario of trusted but error-prone devices.
We present a scheme for a self-testing quantum random number generator. Compared to the fully device-independent model, our scheme requires an extra natural assumption, namely that the mean energy per signal is bounded. The scheme is self-testing, as it allows the user to verify in real-time the correct functioning of the setup, hence guaranteeing the continuous generation of certified random bits. Based on a prepare-and-measure setup, our scheme is practical, and we implement it using only off-the-shelf optical components. The randomness generation rate is 1.25 Mbits/s, comparable to commercial solutions. Overall, we believe that this scheme achieves a promising trade-off between the required assumptions, ease-of-implementation and performance.
We introduce a scheme for a self-testing quantum random-number generator and demonstrate it experimentally. Compared to the fully device-independent model, our scheme requires an extra natural assumption, namely, that the mean number of photons of the signal optical modes is bounded. The scheme is self-testing, as it allows the user to verify in real time the correct functioning of the setup, hence guaranteeing the continuous generation of certified random bits. The scheme is based on a prepare-and-measure setup, which we implement in a proof-of-principle experiment using only off-the-shelf optical components. The randomness generation rate is 1.25 Mbits/s, comparable to commercial solutions. Overall, we believe that this scheme achieves a promising trade-off between the required assumptions, ease of implementation and performance.