Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IET Communications

Destination‐based cooperative jamming in untrusted amplify‐and‐forward relay networks: resource allocation and performance study

Ali Kuhestani, Abbas Mohammadi

Published Dec 1, 2015• 23 citations
Publisher

Abstract

In this study, the authors study the problem of secure transmission in two‐hop amplify‐and‐forward systems with an untrusted relay. To prevent the untrusted relay from intercepting the source message and to achieve positive secrecy rate, the destination‐based cooperative jamming technique is used. In this method, the destination sends an intended jamming signal to the relay. This jamming signal helps protecting the source message from being captured reliably at the untrusted relay, while the destination cancels itself intended jamming signal. The optimal power allocation (OPA) strategy is considered for the proposed system. They observe that the objective function is a quasi‐concave function at high signal‐to‐noise‐ratio regimes. Based on this OPA strategy, in the first step, the outage probability of the system is investigated. It is investigated for three cases. In the two cases, either of the source or the destination node is equipped with large‐scale antennas, and in the third case, both of them are equipped with large‐scale antenna arrays. In all the cases, the closed‐form expressions are derived. In the second step, they investigate the ergodic secrecy rate and present the closed‐form solutions for all the mentioned cases. Finally, simulation results indicate the accuracy of the derived equations.

DOI
10.1049/iet-com.2015.0078

Related papers

Performance Study of Untrusted Relay Network Utilizing Cooperative Jammer

Ali Kuhestani, Abbas Mohammadi, Mohammad Javad Emadi

Abstract—In this paper, the problem of secure transmission in two-hop amplify-and-forward (AF) systems with an untrusted relay is investigated. To prevent the untrusted relay from intercepting the source message and to achieve positive secrecy rate, the destination-based cooperative jamming (DBCJ) technique is used. In this method the destination sends an intended jamming signal to the relay. This jamming signal helps protecting the source message from being captured reliably at the untrusted relay, while the destination cancels itself intended jamming signal. The optimal power allocation (OPA) technique is considered for the presented system. It is observed that the objective function is a quasiconcave function at high signal-to-noise-ratio (SNR) regimes. Based on this OPA technique, we study the ergodic secrecy rate (ESR) and the secrecy outage probability (SOP) of the system when the source and relay are equipped with a single antenna while the destination is equipped with largescale antenna arrays (LSA). Using the achieved closed-form expressions, one can evaluate the performance of the secure system easily and fast and also, they provide significant insight for system design. Finally, simulation results indicate the accuracy of the derived expressions.

AUT Journal of Electrical Engineering•Nov 21, 2016•0 citations

Joint optimal power allocation and relay selection to establish secure transmission in uplink transmission of untrusted relays network

Ali Kuhestani, Abbas Mohammadi, Meysam Masoudi

In this paper, the authors deal with secure transmission in two‐hop amplify‐and‐forward network with untrusted relays. To prevent the untrusted relays from intercepting the source message and to achieve positive secrecy rate, the destination‐based cooperative jamming technique is used. The authors propose joint secure best relay selection (BRS) and optimal power allocation (OPA) for uplink transmission of a cellular network when the base station is equipped with very large‐scale antenna arrays. Then, the common performance metrics such as ergodic secrecy rate (ESR) and secrecy outage probability are evaluated for the optimised network. Moreover, the diversity order and diversity‐multiplexing tradeoff of the system are examined. The authors obtain that the diversity order of joint BRS and OPA scenario is equal to number of relays. Finally, some numerical and simulation results are presented to validate the theoretical analysis and to show the advantages offered by the presented systems. They reveal interesting results that, by increasing number of untrusted relay nodes, the system performance improves. For example, for target ESR 2 bits/s/Hz and ten untrusted relay nodes, the optimised network saves about 5 dB for uplink transmission, in comparison with the system applying the BRS and equal power allocation.

IET Networks•Mar 1, 2016•12 citations

Optimal Power Allocation by Imperfect Hardware Analysis in Untrusted Relaying Networks

Ali Kuhestani, Abbas Mohammadi, Kai‐Kit Wong +3 more

By taking a variety of realistic hardware imperfections into consideration, we propose an optimal power allocation (OPA) strategy to maximize the instantaneous secrecy rate of a cooperative wireless network comprised of a source, a destination, and an untrusted amplify-and-forward relay. We assume that either the source or the destination is equipped with a large-scale multiple antennas' system, while the rest are equipped with a single antenna. To prevent the untrusted relay from intercepting the source message, the destination sends an intended jamming noise to the relay, which is referred to as destination-based cooperative jamming. Given this system model, novel closed-form expressions are presented in the high signal-to-noise ratio regime for the ergodic secrecy rate and the secrecy outage probability. We further improve the secrecy performance of the system by optimizing the associated hardware design. The results reveal that by beneficially distributing the tolerable hardware imperfections across the transmission and reception radio-frequency front ends of each node, the system's secrecy rate may be improved. The engineering insight is that equally sharing the total imperfections at the relay between the transmitter and the receiver provides the best secrecy performance. Numerical results illustrate that the proposed OPA together with the most appropriate hardware design significantly increases the secrecy rate.

arXiv:1709.01334•IEEE Transactions on Wireless Communications•Apr 10, 2018•43 citations

Optimal power allocation to improve secrecy performance of non‐regenerative cooperative systems using an untrusted relay

Ali Kuhestani, Abbas Mohammadi, Moslem Noori

To protect data communication from eavesdropper nodes, different techniques have been developed to improve the physical‐layer security (PLS) of communications systems. Destination‐based cooperative signalling (DBCS) is one of such techniques where the destination sends an intended artificial noise to the untrusted listeners helping to protect the source message from being captured reliably at eavesdroppers. In this study, the authors investigate the application of DBCS to improve the PLS, and as a consequence the secrecy performance of a two‐hop amplify‐and‐forward cooperative system with an untrusted relay. To get the best performance out of DBCS, the transmit power of the source's signal as well as the artificial noise should be carefully adjusted. To address this, they have introduced the optimal power allocation to maximise the secrecy rate of the system under a sum‐power constraint at the network nodes. For a system with large‐scale antenna arrays at the base station, then then find the closed‐form solution for the secrecy outage probability and the ergodic secrecy rate of the optimised system for both uplink and downlink. The presented simulation results validate the authors’ theoretical analysis and reveal that the proposed DBCS with optimal power allocation significantly improves the secrecy performance of the system.

IET Communications•Mar 14, 2016•16 citations

Joint optimal power allocation, cooperative beamforming, and jammer selection design to secure untrusted relaying network

Majid Moradikia, Saeed Mashdour, Ali Jamshidi

Abstract A half‐duplex relaying network provides 2 opportunities for passive eavesdroppers (Eves) and 1 opportunity for untrusted relays to intercept the information. In this paper, we aim to enhance the physical layer security of a cooperative network where a single‐antenna source intends to communicate with a single‐antenna destination in the presence of a group of untrusted relays and a passive eavesdropper. The objective is to protect the data confidentially while concurrently relying on the untrusted relays as potential Eves to improve both the security and reliability of the network. To realize this objective, we design a joint cooperative beamforming and cooperative jamming strategy. With the aim of maximizing the instantaneous secrecy rate, an optimal power allocation (OPA) scheme is proposed where the transmission powers of both jammer and source are optimized simultaneously under the total power budget constraint. To further improve the secrecy rate, a jammer selection strategy is also proposed where cooperative jamming is performed by the destination or one of the idle relays. For the proposed scheme, a closed‐form expression of beamformer vector is derived by solving a generalized eigenvalue problem. Finally, for the OPA problem, it is possible to be neither convex nor concave. In this regard, all possible cases are investigated to determine the OPA factor accurately. Numerical results illustrate that the proposed joint OPA–cooperative beamforming scheme, together with the most appropriate jammer selection strategy, significantly increases the secrecy rate.

Transactions on Emerging Telecommunications Technologies•Jan 18, 2018•12 citations

On the Jamming Power Allocation for Secure Amplify-and-Forward Relaying via Cooperative Jamming

Ki‐Hong Park, Tian Wang, Mohamed‐Slim Alouini

In this paper, we investigate secure communications in two-hop wireless relaying networks with one eavesdropper. To prevent the eavesdropper from intercepting the source message, the destination sends an intended jamming noise to the relay, which is referred to as cooperative jamming. This jamming noise helps protecting the source message from being captured reliably at the eavesdropper, while the destination cancels its self-intended noise. According to the channel information available at the destination, we derive three jamming power allocation strategies to minimize the outage probability of the secrecy rate. In addition, we derive analytic results quantifying the jamming power consumption of the proposed allocation methods.

IEEE Journal on Selected Areas in Communications•Aug 23, 2013•148 citations
In this study, the authors study the problem of secure transmission in two‐hop amplify‐and‐forward systems with an untrusted relay. To prevent the untrusted relay from intercepting the source message and to achieve positive secrecy rate, the destination‐based cooperative jamming technique is used. In this method, the destination sends an intended jamming signal to the relay. This jamming signal helps protecting the source message from being captured reliably at the untrusted relay, while the destination cancels itself intended jamming signal. The optimal power allocation (OPA) strategy is considered for the proposed system. They observe that the objective function is a quasi‐concave function at high signal‐to‐noise‐ratio regimes. Based on this OPA strategy, in the first step, the outage probability of the system is investigated. It is investigated for three cases. In the two cases, either of the source or the destination node is equipped with large‐scale antennas, and in the third case, both of them are equipped with large‐scale antenna arrays. In all the cases, the closed‐form expressions are derived. In the second step, they investigate the ergodic secrecy rate and present the closed‐form solutions for all the mentioned cases. Finally, simulation results indicate the accuracy of the derived equations.
Abstract—In this paper, the problem of secure transmission in two-hop amplify-and-forward (AF) systems with an untrusted relay is investigated. To prevent the untrusted relay from intercepting the source message and to achieve positive secrecy rate, the destination-based cooperative jamming (DBCJ) technique is used. In this method the destination sends an intended jamming signal to the relay. This jamming signal helps protecting the source message from being captured reliably at the untrusted relay, while the destination cancels itself intended jamming signal. The optimal power allocation (OPA) technique is considered for the presented system. It is observed that the objective function is a quasiconcave function at high signal-to-noise-ratio (SNR) regimes. Based on this OPA technique, we study the ergodic secrecy rate (ESR) and the secrecy outage probability (SOP) of the system when the source and relay are equipped with a single antenna while the destination is equipped with largescale antenna arrays (LSA). Using the achieved closed-form expressions, one can evaluate the performance of the secure system easily and fast and also, they provide significant insight for system design. Finally, simulation results indicate the accuracy of the derived expressions.
In this paper, the authors deal with secure transmission in two‐hop amplify‐and‐forward network with untrusted relays. To prevent the untrusted relays from intercepting the source message and to achieve positive secrecy rate, the destination‐based cooperative jamming technique is used. The authors propose joint secure best relay selection (BRS) and optimal power allocation (OPA) for uplink transmission of a cellular network when the base station is equipped with very large‐scale antenna arrays. Then, the common performance metrics such as ergodic secrecy rate (ESR) and secrecy outage probability are evaluated for the optimised network. Moreover, the diversity order and diversity‐multiplexing tradeoff of the system are examined. The authors obtain that the diversity order of joint BRS and OPA scenario is equal to number of relays. Finally, some numerical and simulation results are presented to validate the theoretical analysis and to show the advantages offered by the presented systems. They reveal interesting results that, by increasing number of untrusted relay nodes, the system performance improves. For example, for target ESR 2 bits/s/Hz and ten untrusted relay nodes, the optimised network saves about 5 dB for uplink transmission, in comparison with the system applying the BRS and equal power allocation.
By taking a variety of realistic hardware imperfections into consideration, we propose an optimal power allocation (OPA) strategy to maximize the instantaneous secrecy rate of a cooperative wireless network comprised of a source, a destination, and an untrusted amplify-and-forward relay. We assume that either the source or the destination is equipped with a large-scale multiple antennas' system, while the rest are equipped with a single antenna. To prevent the untrusted relay from intercepting the source message, the destination sends an intended jamming noise to the relay, which is referred to as destination-based cooperative jamming. Given this system model, novel closed-form expressions are presented in the high signal-to-noise ratio regime for the ergodic secrecy rate and the secrecy outage probability. We further improve the secrecy performance of the system by optimizing the associated hardware design. The results reveal that by beneficially distributing the tolerable hardware imperfections across the transmission and reception radio-frequency front ends of each node, the system's secrecy rate may be improved. The engineering insight is that equally sharing the total imperfections at the relay between the transmitter and the receiver provides the best secrecy performance. Numerical results illustrate that the proposed OPA together with the most appropriate hardware design significantly increases the secrecy rate.
To protect data communication from eavesdropper nodes, different techniques have been developed to improve the physical‐layer security (PLS) of communications systems. Destination‐based cooperative signalling (DBCS) is one of such techniques where the destination sends an intended artificial noise to the untrusted listeners helping to protect the source message from being captured reliably at eavesdroppers. In this study, the authors investigate the application of DBCS to improve the PLS, and as a consequence the secrecy performance of a two‐hop amplify‐and‐forward cooperative system with an untrusted relay. To get the best performance out of DBCS, the transmit power of the source's signal as well as the artificial noise should be carefully adjusted. To address this, they have introduced the optimal power allocation to maximise the secrecy rate of the system under a sum‐power constraint at the network nodes. For a system with large‐scale antenna arrays at the base station, then then find the closed‐form solution for the secrecy outage probability and the ergodic secrecy rate of the optimised system for both uplink and downlink. The presented simulation results validate the authors’ theoretical analysis and reveal that the proposed DBCS with optimal power allocation significantly improves the secrecy performance of the system.
Abstract A half‐duplex relaying network provides 2 opportunities for passive eavesdroppers (Eves) and 1 opportunity for untrusted relays to intercept the information. In this paper, we aim to enhance the physical layer security of a cooperative network where a single‐antenna source intends to communicate with a single‐antenna destination in the presence of a group of untrusted relays and a passive eavesdropper. The objective is to protect the data confidentially while concurrently relying on the untrusted relays as potential Eves to improve both the security and reliability of the network. To realize this objective, we design a joint cooperative beamforming and cooperative jamming strategy. With the aim of maximizing the instantaneous secrecy rate, an optimal power allocation (OPA) scheme is proposed where the transmission powers of both jammer and source are optimized simultaneously under the total power budget constraint. To further improve the secrecy rate, a jammer selection strategy is also proposed where cooperative jamming is performed by the destination or one of the idle relays. For the proposed scheme, a closed‐form expression of beamformer vector is derived by solving a generalized eigenvalue problem. Finally, for the OPA problem, it is possible to be neither convex nor concave. In this regard, all possible cases are investigated to determine the OPA factor accurately. Numerical results illustrate that the proposed joint OPA–cooperative beamforming scheme, together with the most appropriate jammer selection strategy, significantly increases the secrecy rate.
In this paper, we investigate secure communications in two-hop wireless relaying networks with one eavesdropper. To prevent the eavesdropper from intercepting the source message, the destination sends an intended jamming noise to the relay, which is referred to as cooperative jamming. This jamming noise helps protecting the source message from being captured reliably at the eavesdropper, while the destination cancels its self-intended noise. According to the channel information available at the destination, we derive three jamming power allocation strategies to minimize the outage probability of the secrecy rate. In addition, we derive analytic results quantifying the jamming power consumption of the proposed allocation methods.