Control of time dependences of waveforms is important for the application of optical signals in the nonclassical state that are recorded in various quantum-memory devices. Matching of waveforms at the signal detectors is needed for measurements using optical mixing (homodyne detection), detection of entangled states, etc. Earlier results for cavity quantum memory on an ensemble of cold atoms show that the waveform of the strong control field can be changed in such a way that the profile of optical signal recorded and readout from a collective atomic spin is convenient for measurements. In the course of recording, the control field provides the suppression of the reflection loss of the input signal related to the destructive interference of the signal and local field at the coupling mirror (impedance matching). Using an example of memory reading, we show that impedance matching provides additional possibilities for variations in the control field and allows efficient generation of output quantum signals with predetermined waveforms convenient for experimental measurements.
Control of time dependences of waveforms is important for the application of optical signals in the nonclassical state that are recorded in various quantum-memory devices. Matching of waveforms at the signal detectors is needed for measurements using optical mixing (homodyne detection), detection of entangled states, etc. Earlier results for cavity quantum memory on an ensemble of cold atoms show that the waveform of the strong control field can be changed in such a way that the profile of optical signal recorded and readout from a collective atomic spin is convenient for measurements. In the course of recording, the control field provides the suppression of the reflection loss of the input signal related to the destructive interference of the signal and local field at the coupling mirror (impedance matching). Using an example of memory reading, we show that impedance matching provides additional possibilities for variations in the control field and allows efficient generation of output quantum signals with predetermined waveforms convenient for experimental measurements.
Abstract We investigate the non-stationary and relaxation phenomena in cavity-assisted quantum memories for light. As a storage medium we consider an ensemble of cold atoms with standard Lambda-scheme of working levels. Some theoretical aspects of the problem were treated previously by many authors, and recent experiments stimulate more deep insight into the ultimate ability and limitations of the device. Since quantum memories can be used not only for the storage of quantum information, but also for a substantial manipulation of ensembles of quantum states, the speed of such manipulation and hence the ability to write and retrieve the signals of relatively short duration becomes important. In our research we do not apply the so-called bad cavity limit, and consider the memory operation of the signals whose duration is not much larger than the cavity field lifetime, accounting also for the finite lifetime of atomic coherence. In our paper we present an effective approach that makes it possible to find the non-stationary amplitude and phase behavior of strong classical control field, that matches the desirable time profile of both the envelope and the phase of the retrieved quantized signal. The phase properties of the retrieved quantized signals are of importance for the detection and manipulation of squeezing, entanglement, etc by means of optical mixing and homodyning.
We present a new scheme of quantum memory for optical images (spatially multimode light fields) that allows mapping the quantum state of the signal onto the long-lived coherence of the ground state of an ensemble of stationary atoms or impurity centers. The memory medium is embedded in an optical cavity with degenerate transverse modes, which increases the effective optical thickness of the medium and allows one, in principle, to store information in optically thin atomic layers. Since, in reality, storage and retrieval of limited-duration signals, including signals shorter than the lifetime of the field in the cavity, is of interest, we do not use the low- Q cavity approximation. The influence of losses due to partial reflection of the nonstationary signal field incident on a coupling mirror on the storage efficiency is considered. We used the method of approximate impedance matching, wherein losses due to reflection can be minimized by controlling the coupling parameter of the light field with memory medium in time, thus creating conditions for destructive interference of the signal and local fields on the coupling mirror. The influence of diffraction on the transverse resolution of memory at the writing and readout stages is investigated, and the number of effectively stored transverse spatial modes of the signal is estimated.
Abstract We investigate theoretically quantum entanglement of light with the collective spin polarization of a cold atomic ensemble in cavity-assisted Raman schemes. Previous works concentrated mostly on the bad cavity limit where the signals are much longer than the cavity field lifetime. In view of atomic relaxation and other imperfections, there may arise a need to speed-up the light-atoms interface operation. By increasing the cavity field lifetime, one can achieve better light–matter coupling and entanglement. In our work, we consider the non-adiabatic effects that become important beyond the bad cavity limit in both low-photon and continuous variables regime. We find classical control field time profiles that allow one to retrieve from the cavity an output quantized signal of a predefined time shape and duration, which is optimal for the homodyne detection, optical mixing or further manipulation. This is done for a wide range of the signal duration as compared to the cavity field lifetime. We discuss an optimal cavity–atomic ensemble matching in terms of the cavity field lifetime which allows one to apply less intense control field and to minimize a variety of nonlinear effects, such as AC light shifts, four-wave mixing, etc, which may be potentially harmful to an experiment.
Quantum efficiency is an important characteristic of quantum memory devices that are aimed at recording the quantum state of light signals and its storing and reading. In the case of memory based on an ensemble of cold atoms placed in an optical cavity, the efficiency is restricted, in particular, by relaxation processes in the system of active atomic levels. We show how the effect of the relaxation on the quantum efficiency can be determined in a regime of the memory usage in which the evolution of signals in time is not arbitrarily slow on the scale of the field lifetime in the cavity and when the frequently used approximation of the adiabatic elimination of the quantized cavity mode field cannot be applied. Taking into account the effect of the nonadiabaticity on the memory quality is of interest in view of the fact that, in order to increase the field–medium coupling parameter, a higher cavity quality factor is required, whereas storing and processing of sequences of many signals in the memory implies that their duration is reduced. We consider the applicability of the well-known efficiency estimates via the system cooperativity parameter and estimate a more general form. In connection with the theoretical description of the memory of the given type, we also discuss qualitative differences in the behavior of a random source introduced into the Heisenberg–Langevin equations for atomic variables in the cases of a large and a small number of atoms.
The addressability of parallel spatially multimode quantum memory for light allows one to control independent collective spin waves within the same cold atomic ensemble. Generally speaking, there are transverse and longitudinal degrees of freedom of the memory that one can address by a proper choice of the pump (control) field spatial pattern. Here we concentrate on the mutual evolution and transformation of quantum states of the longitudinal modes of collective spin coherence in the cavity-based memory scheme. We assume that these modes are coherently controlled by the pump waves of the on-demand transverse profile, that is, by the superpositions of waves propagating in the directions close to orthogonal to the cavity axis. By the write-in, this allows one to couple a time sequence of the incoming quantized signals to a given set of superpositions of orthogonal spin waves. By the readout, one can retrieve quantum states of the collective spin waves that are controllable superpositions of the initial ones and are coupled on demand to the output signal sequence. In a general case, the memory is able to operate as a controllable delayed multi-port beamsplitter, capable of transformation of the delays, the durations and time shapes of signals in the sequence. We elaborate the theory of such light-matter interface for the spatially multivariate cavity-based off-resonant Raman-type quantum memory. Since, in order to speed up the manipulation of complex signals in multivariate memories, it might be of interest to store relatively short light pulses of a given time shape, we also address some issues of the cavity-based memory operation beyond the bad cavity limit.
Abstract The quantum spin states of an atomic ensemble are of special interest to both fundamental studies and precision measurement applications. Here, we propose a scheme to prepare collective quantum states of an atomic ensemble placed in an optical cavity via homodyne measurement of a probing light field. The effective interactions of atoms mediated by photons are enhanced by the optical cavity, and the output probe light could also be entangled with the collective spin states. By selectively measuring the quadrature of the output light, we can prepare various quantum states, including superposition states of Dicke states and Dicke squeezed states. It is also demonstrated that the fidelity of the prepared quantum state can be enhanced by repetitive homodyne detection and using longer probe laser pulses. With the experimental parameters, we discuss some imperfections, including background noise, fluctuation of the measurement outcomes, and free-space scattering.We believe that our scheme should be feasible for experimental realization with current technologies, which may be used in the future study of quantum mechanics and quantum metrology.