Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Improved Sum-Min Decoding for Irregular LDPC Codes

Gottfried Lechner, Jossy Sayir

Published Apr 3, 2006• 28 citations
OpenAlex

Abstract

An analytical approach to determining the optimal post-processing function for the minimum operation in the SumMin algorithm, previously derived for regular Low-Density Parity-Check (LOPe) codes, is extended to irregular LDPC codes. The optimal post-processing expression for the irregular case varies from one check node to another as well as from one iteration to the next. For practical use, it is necessary to approximate this optimal function. Unlike for the regular case, where one could use a unique post-processing function throughout the decoding process without a loss of bit error performance, for irregular codes it is crucial to vary the post-processing from one iteration to the next in order to achieve good performance. Using this approach, a bit error performance of 0.15dS from the Sum-Product decoder was demonstrated, corresponding to a IdS improvement compared to the Sum-Min algorithm without post-processing.

Related papers

Performance of Quantized Min-Sum Decoding Algorithms for Irregular LDPC Codes

Daesun Oh, Keshab K. Parhi

This paper analyzes the performance of quantized min-sum decoding algorithms for irregular low-density parity-check (LDPC) codes. For regular LDPC codes, it is known that the normalized or offset min-sum decoding algorithm with quantization bits less than 6 bits achieves good performances over wide range of signal-to-noise ratios (SNR). However, finite precision effects in decoding irregular LDPC codes are different from that in decoding regular LDPC codes which is caused by the difference of convergence speeds between low degree nodes and high degree nodes. This paper proposes a novel method to improve the performance of the conventional normalized or offset min-sum decoding algorithm when it is approximated with finite precision for hardware implementations. The proposed method applies down-scaling factors to intrinsic information which has effects on increasing the reliability of extrinsic information at variable nodes and compensating the quantization errors caused by finite precision. Computer simulation results for irregular LDPC codes show that the proposed normalized and offset min-sum decoding algorithms achieve better performances at high SNR compared to the conventional normalized and offset min-sum algorithms under (6:2) quantization scheme.

IEEE International Symposium on Circuits and Systems proceedings•May 1, 2007•15 citations

Optimized Min-Sum Decoding Algorithm for Low Density Parity Check Codes

Mohammad Rakibul Islam, Dewan Siam Shafiullah, Muhammad Mostafa +2 more

Abstract ― Low Density Parity Check (LDPC) code approaches Shannon–limit performance for binary field and long code lengths. However, performance of binary LDPC code is degraded when the code word length is small. An optimized min-sum algorithm for LDPC code is proposed in this paper. In this algorithm unlike other decoding methods, an optimization factor has been introduced in both check node and bit node of the Min-sum algorithm. The optimization factor is obtained before decoding program, and the same factor is multiplied twice in one cycle. So the increased complexity is fairly low. Simulation results show that the proposed Optimized Min-Sum decoding algorithm performs very close to the Sum-Product decoding while preserving the main features of the Min-Sum decoding, that is low complexity and independence with respect to noise variance estimation errors.

•Oct 31, 2015•2 citations

Optimized Min-Sum Decoding Algorithm for Low Density Parity Check Codes

Mohammad Rakibul, Dewan Siam Shafiullah, Muhammad Mostafa +1 more

Low Density Parity Check (LDPC) code approaches Shannon–limit performance for binary field and long code lengths. However, performance of binary LDPC code is degraded when the code word length is small. An optimized min-sum algorithm for LDPC code is proposed in this paper. In this algorithm unlike other decoding methods, an optimization factor has been introduced in both check node and bit node of the Min-sum algorithm. The optimization factor is obtained before decoding program, and the same factor is multiplied twice in one cycle. So the increased complexity is fairly low. Simulation results show that the proposed Optimized Min-Sum decoding algorithm performs very close to the Sum-Product decoding while preserving the main features of the Min-Sum decoding, that is low complexity and independence with respect to noise variance estimation errors.

International Journal of Advanced Computer Science and Applications•Jan 1, 2011•19 citations

A Modified Normalized Min - Sum Decoding Algorithm for Irregular LDPC Codes

Michaelraj Kingston Roberts, Ramesh Jayabalan

In this paper, a modified normalized Min-Sum algorithm (MNMSA) is proposed for decoding irregular Low Density Parity Check Codes (LDPC) with non-uniform degree distribution. The proposed algorithm provides an efficient decoding scheme to enhance the error performance of an irregular LDPC code without increasing the hardware complexity. An efficient 6- bit quantization scheme is utilized in the proposed algorithm with optimally combined normalization and down scaling factors to resolve the magnitude overestimation issue which occurs during iterative message passing process between the nodes. The simulation results demonstrate that the proposed algorithm achieves good decoding performance in terms of Frame Error Rate (FER) and Bit Error Rate (BER) without the requirement of complex arithmetic calculations. Compared to other min- sum based decoding algorithms the decoding process of the proposed MNMSA requires only fewer decoding iterations over wide range of signal- to- noise ratio (SNR) to achieve comparable decoding performance to that of Belief Propagation (BP) algorithm without increasing the hardware complexity.

•Jan 1, 2014•3 citations

Optimized Min-Sum decoding algorithm for Low Density PC codes

Dewan Siam Shafiullah, Mohammad Rakibul Islam, Muhammad Mostafa Amir Faisal +1 more

Low Density Parity Check (LDPC) approaches Shannon -limit performance for binary field and long code lengths. However performance of binary LDPC code is degraded when the code word length is small. An optimized min-sum algorithm for LDPC code is proposed in this paper. In this algorithm unlike other decoding methods an optimization factor has been introduced in both check node and bit node of the Min-sum algorithm. The optimization factor is obtained before decoding program and the same factor is multiplied twice in one cycle. So the increased complexity is fairly low. Simulation results show that the proposed Optimized Min-Sum decoding algorithm performs very close to the Sum-Product decoding, while preserving the main features of the Min-Sum decoding, that is low complexity and independence with respect to noise variance estimation errors.

International Conference on Advanced Communication Technology•Jan 1, 2012•5 citations

A modified Offset Min-Sum decoding algorithm for LDPC codes

Meng Xu, Jianhui Wu, Meng Zhang

In this paper a modified Offset Min-Sum decoding algorithm for Low-Density Parity Check Codes is presented. In this modified algorithm, the offset factor in the original Offset Min-Sum algorithm is adjusted iteratively with the assistance of the check-node computation outputs of the Normalized Min-Sum algorithm. As a result, the offset factor in our modified algorithm can be calculated adaptively and more efficiently according to the previous decoding procedure, which can minimize the decoding degradation compared with the Belief Propagation decoding algorithm. The simulation results show that, compared with the original Offset Min-Sum decoding algorithm, our modified algorithm can achieve noticeable performance improvement with minor extra hardware complexity. For example, when BER is 10−5, our algorithm can achieve 0.1dB and 0.2dB decoding gain over Offset Min-Sum algorithm for regular and irregular LDPC codes respectively.

•Jul 1, 2010•29 citations
An analytical approach to determining the optimal post-processing function for the minimum operation in the SumMin algorithm, previously derived for regular Low-Density Parity-Check (LOPe) codes, is extended to irregular LDPC codes. The optimal post-processing expression for the irregular case varies from one check node to another as well as from one iteration to the next. For practical use, it is necessary to approximate this optimal function. Unlike for the regular case, where one could use a unique post-processing function throughout the decoding process without a loss of bit error performance, for irregular codes it is crucial to vary the post-processing from one iteration to the next in order to achieve good performance. Using this approach, a bit error performance of 0.15dS from the Sum-Product decoder was demonstrated, corresponding to a IdS improvement compared to the Sum-Min algorithm without post-processing.
This paper analyzes the performance of quantized min-sum decoding algorithms for irregular low-density parity-check (LDPC) codes. For regular LDPC codes, it is known that the normalized or offset min-sum decoding algorithm with quantization bits less than 6 bits achieves good performances over wide range of signal-to-noise ratios (SNR). However, finite precision effects in decoding irregular LDPC codes are different from that in decoding regular LDPC codes which is caused by the difference of convergence speeds between low degree nodes and high degree nodes. This paper proposes a novel method to improve the performance of the conventional normalized or offset min-sum decoding algorithm when it is approximated with finite precision for hardware implementations. The proposed method applies down-scaling factors to intrinsic information which has effects on increasing the reliability of extrinsic information at variable nodes and compensating the quantization errors caused by finite precision. Computer simulation results for irregular LDPC codes show that the proposed normalized and offset min-sum decoding algorithms achieve better performances at high SNR compared to the conventional normalized and offset min-sum algorithms under (6:2) quantization scheme.
Abstract ― Low Density Parity Check (LDPC) code approaches Shannon–limit performance for binary field and long code lengths. However, performance of binary LDPC code is degraded when the code word length is small. An optimized min-sum algorithm for LDPC code is proposed in this paper. In this algorithm unlike other decoding methods, an optimization factor has been introduced in both check node and bit node of the Min-sum algorithm. The optimization factor is obtained before decoding program, and the same factor is multiplied twice in one cycle. So the increased complexity is fairly low. Simulation results show that the proposed Optimized Min-Sum decoding algorithm performs very close to the Sum-Product decoding while preserving the main features of the Min-Sum decoding, that is low complexity and independence with respect to noise variance estimation errors.
Low Density Parity Check (LDPC) code approaches Shannon–limit performance for binary field and long code lengths. However, performance of binary LDPC code is degraded when the code word length is small. An optimized min-sum algorithm for LDPC code is proposed in this paper. In this algorithm unlike other decoding methods, an optimization factor has been introduced in both check node and bit node of the Min-sum algorithm. The optimization factor is obtained before decoding program, and the same factor is multiplied twice in one cycle. So the increased complexity is fairly low. Simulation results show that the proposed Optimized Min-Sum decoding algorithm performs very close to the Sum-Product decoding while preserving the main features of the Min-Sum decoding, that is low complexity and independence with respect to noise variance estimation errors.
In this paper, a modified normalized Min-Sum algorithm (MNMSA) is proposed for decoding irregular Low Density Parity Check Codes (LDPC) with non-uniform degree distribution. The proposed algorithm provides an efficient decoding scheme to enhance the error performance of an irregular LDPC code without increasing the hardware complexity. An efficient 6- bit quantization scheme is utilized in the proposed algorithm with optimally combined normalization and down scaling factors to resolve the magnitude overestimation issue which occurs during iterative message passing process between the nodes. The simulation results demonstrate that the proposed algorithm achieves good decoding performance in terms of Frame Error Rate (FER) and Bit Error Rate (BER) without the requirement of complex arithmetic calculations. Compared to other min- sum based decoding algorithms the decoding process of the proposed MNMSA requires only fewer decoding iterations over wide range of signal- to- noise ratio (SNR) to achieve comparable decoding performance to that of Belief Propagation (BP) algorithm without increasing the hardware complexity.
Low Density Parity Check (LDPC) approaches Shannon -limit performance for binary field and long code lengths. However performance of binary LDPC code is degraded when the code word length is small. An optimized min-sum algorithm for LDPC code is proposed in this paper. In this algorithm unlike other decoding methods an optimization factor has been introduced in both check node and bit node of the Min-sum algorithm. The optimization factor is obtained before decoding program and the same factor is multiplied twice in one cycle. So the increased complexity is fairly low. Simulation results show that the proposed Optimized Min-Sum decoding algorithm performs very close to the Sum-Product decoding, while preserving the main features of the Min-Sum decoding, that is low complexity and independence with respect to noise variance estimation errors.
In this paper a modified Offset Min-Sum decoding algorithm for Low-Density Parity Check Codes is presented. In this modified algorithm, the offset factor in the original Offset Min-Sum algorithm is adjusted iteratively with the assistance of the check-node computation outputs of the Normalized Min-Sum algorithm. As a result, the offset factor in our modified algorithm can be calculated adaptively and more efficiently according to the previous decoding procedure, which can minimize the decoding degradation compared with the Belief Propagation decoding algorithm. The simulation results show that, compared with the original Offset Min-Sum decoding algorithm, our modified algorithm can achieve noticeable performance improvement with minor extra hardware complexity. For example, when BER is 10−5, our algorithm can achieve 0.1dB and 0.2dB decoding gain over Offset Min-Sum algorithm for regular and irregular LDPC codes respectively.