Interferometry with atoms is a young discipline of physics. The ¯rst interfer- ometers were realised in the early 1990s, using light pulses as beamsplitters in momentum space. Recent developments in atom optics have led to new proposals for interferometers, where the splitting takes place spatially. Mag- netic and optical traps are both suited for this kind of interferometer if a well de¯ned and highly controllable trap is realised. In this thesis results from two experiments that in principle allow the creation of such traps are presented. After reviewing the principles and techniques of atom optics necessary for the understanding of this thesis, a theoretical discussion about the spatial single atom interferometer in a double well potential follows. It is shown that within reasonable limits the system can be reduced to two levels and solved by the Bloch equations. Using the realistic case of a not perfectly symmetric double well potential allows an understanding of the physics behind such an interferometer: how phase is accumulated and how localisation of the atoms leads to the loss of the interferometric signal. Then two experiments are presented. One experiment was newly built up as part of this thesis: it uses a novel hybrid atom chip' with a combination of a magneto-optical ¯lm and current-carrying structures to produce the magnetic trapping potentials. This experiment allowed 5¢108 87Rb atoms to be captured in a magneto-optical trap, where the atom-chip's surface acts as a mirror. The atoms were then transferred into a purely magnetic trap which was created by current carrying structures on the chip. From there on, RF radiation enforced evaporative cooling, so that a quantum degenerate Bose-Einstein condensate of up to 105 atoms was created. It was also shown that the magneto-optical ¯lm is able to hold and trap the atoms. In the second experiment atoms are trapped in the spatially varying inten- sity of light of 1.03 ¹m wavelength. This experiment used an existing set-up as a basis and was modi¯ed and improved for this new project. This experiment starts with 109 87Rb atoms in a 6-beam magneto-optical trap. After examining and optimising the loading process, 1:5 ¢ 105 atoms could be loaded directly from the Magneto-optical trap into the optical dipole potential of two crossed laser beams at 1.03 ¹m. Evaporative cooling was demonstrated though the phase transition to quantum degeneracy was not reached.
Interferometry with atoms is a young discipline of physics. The ¯rst interfer- ometers were realised in the early 1990s, using light pulses as beamsplitters in momentum space. Recent developments in atom optics have led to new proposals for interferometers, where the splitting takes place spatially. Mag- netic and optical traps are both suited for this kind of interferometer if a well de¯ned and highly controllable trap is realised. In this thesis results from two experiments that in principle allow the creation of such traps are presented. After reviewing the principles and techniques of atom optics necessary for the understanding of this thesis, a theoretical discussion about the spatial single atom interferometer in a double well potential follows. It is shown that within reasonable limits the system can be reduced to two levels and solved by the Bloch equations. Using the realistic case of a not perfectly symmetric double well potential allows an understanding of the physics behind such an interferometer: how phase is accumulated and how localisation of the atoms leads to the loss of the interferometric signal. Then two experiments are presented. One experiment was newly built up as part of this thesis: it uses a novel hybrid atom chip' with a combination of a magneto-optical ¯lm and current-carrying structures to produce the magnetic trapping potentials. This experiment allowed 5¢108 87Rb atoms to be captured in a magneto-optical trap, where the atom-chip's surface acts as a mirror. The atoms were then transferred into a purely magnetic trap which was created by current carrying structures on the chip. From there on, RF radiation enforced evaporative cooling, so that a quantum degenerate Bose-Einstein condensate of up to 105 atoms was created. It was also shown that the magneto-optical ¯lm is able to hold and trap the atoms. In the second experiment atoms are trapped in the spatially varying inten- sity of light of 1.03 ¹m wavelength. This experiment used an existing set-up as a basis and was modi¯ed and improved for this new project. This experiment starts with 109 87Rb atoms in a 6-beam magneto-optical trap. After examining and optimising the loading process, 1:5 ¢ 105 atoms could be loaded directly from the Magneto-optical trap into the optical dipole potential of two crossed laser beams at 1.03 ¹m. Evaporative cooling was demonstrated though the phase transition to quantum degeneracy was not reached.
Atom chips are an excellent tool for studying ultracold degenerate quantum gases, due to the high degree of controllability afforded by the precise potentials generated from the current-carrying microfabricated wires on the chip surface. The geometries of the trapping potentials are inherently capable of realising extreme aspect ratios, and therefore creating model systems with effectively reduced dimensionality, particularly the theoretically-tractable one-dimensional Bose gas. In addition, the temporal tunability makes it possible to impart non-adiabatic changes on the trapping potentials, allowing experimental investigation of samples which have been brought out of equilibrium - a situation which is not fully theoretically understood. This thesis describes the implementation, development and characterisation of an experimental system for producing the first Bose-Einstein condensates of atomic rubidium 87 gas trapped on the surface of an atom chip in Nottingham. Such an apparatus is very complex and requires careful characterisation in order to run in a stable and reliable way. Details of the experimental setup are thoroughly outlined, including the vacuum system, lasers, electronics, computer control and timing, and the optical imaging system. A newly installed compact two-dimensional magneto-optical trap provides an loading rate of 5e7 atoms per second for loading a three-dimensional mirror-magneto-optical trap with 1.5e8 atoms, at a temperature of 300uK within 10s. The cloud is then sub-Doppler cooled to 50uK, and spin-polarised with 96% purity into the |F=2,mF=+2> ground state within 5ms, in preparation for loading a purely magnetic trap. A millimeter sized copper Z-shaped conductor located beneath the atom chip surface creates a Ioffe-Pritchard magnetic trap, into which the laser cooled cloud is loaded with 70% efficiency, and can be held with a vacuum-limited lifetime of 40s. Evaporative cooling then pre-cools the sample to below 20uK within 10s, to allow the subsequent loading into potentials created by the atom chip with 100% efficiency. A final evaporation stage then cools the cloud below the phase transition temperature of 800nK, resulting finally in pure BECs with 105 atoms confined using the atom chip. Key measurements of various properties of the trapped condensates are presented, which are important in order to characterise the system fully, and to compare with theoretical expectations. In particular, included are the variation of condensate fraction with temperature, the BEC expansion dynamics, and the condensate lifetime in the trap, for example. Finally, it is demonstrated how BECs can be produced on the atom chip without the use of external macroscopic coils, achieved by using novel, integrated sheet structures located beneath the chip surface - unique to this experimental system - to create the necessary bias fields.
Research on degenerate quantum gases of dilute atomic gases has become a well established field in modern physics and revealed many astonishing phenomena. The first experiments on Bose and Fermi gases at low temperatures aimed to prove the predictions of quantum mechanics on a macroscopic scale. Since then we make use of Bose and Fermi gases and mixtures of any combination to model other many body systems. A property of Bose Einstein condensates is superfluidity which we want to investigate further in toroidal potentials with a new apparatus which can produce an all-optical BEC. This means trapping thermal atoms in an optical dipole trap and cooling the sample by evaporation into the quantum degenerate regime. This new technique was first successfully demonstrated by M.D. Barrett et al. in 2001 and promises to be faster and simpler than the well established and common way of evaporation in magnetic traps. A new apparatus was built by the author and we report on the experimental details of the trapping of 87Rb atoms from a hot vapour and cooling them in a magneto-optical trap, and further evaporation to quantum degeneracy in a crossed optical dipole trap operating at a wavelength of l = 1064nm, with accurate control of the power in both beams via a feedback loop. The evaporation of neutral atoms of 87Rb in far red detuned optical dipole traps using linearly polarised laser light is spin independent, and mixed spinor condensates of the F=1 manifold can be formed. As an empirical technique we found by applying a magnetic gradient field during the final evaporation that we can selectively populate mF spin states or prepare mixtures. This intriguing mechanism was found earlier as well by M. S. Chang, but is yet not fully understood and subject of our future research. We can now routinely prepare an almost pure condensate containing up to 7000 atoms in the condensed phase purely in the mF = 0 spin state. This thesis contains the theoretical framework of Bose-Einstein condensation with in mean-field theory, the concepts of cooling of atoms in magneto-optical traps, the trapping and evaporation in optical dipole traps and the experimental realisation. In the future this experiment will be extended by a fast scanning dipole trap to apply arbitrary time averaged potentials of more complex geometries, such as toroidal traps to study the effects of superfluidity in a periodic potential. The production of toroidal traps and cold atoms in such a trap are outlined in this thesis.
This thesis describes the design, construction and optimisation of a new apparatus to produce Bose-Einstein condensates (BECs) of 87Rb atoms. The main aim in building this system was to include a high resolution imaging system capable of resolving single atoms. Optical access for the imaging system was created by including a stage of atom transport in which the atoms are magnetically transferred ~50 cm from a magneto-optical trap (MOT), where they are initially collected, to a glass science cell where experiments are carried out and imaging takes place. Two magnetic transport schemes have been demonstrated, based on approaches first used in other laboratories. First, a scheme in which the atoms are transferred in a moving pair of magnetic trapping coils. Second, a hybrid scheme where the atoms are translated part of the distance in the moving coils, and the rest of the way by switching the current in a chain of fixed coils. This second scheme was designed to allow optical access for a high numerical aperture microscope objective to be placed immediately next to the science cell for high resolution imaging.The atoms were first collected in a large pyramid MOT which can be loaded with 3 × 10^9 atoms in a time of 20 s. Around half of these atoms – those in the |F = 1, mF = −1> magnetic substate – were then magnetically trapped prior to transport. The typical fraction of the trapped atoms transferred to the science cell was ~30% and ~18% for the moving coils and hybrid schemes respectively.Evaporative cooling was carried out on the atom cloud following transport with the moving coils and loading into a time-orbiting potential trap. The optimised cooling sequence lasted for 28 s and consistently produced a pure condensate with 5 × 10^5 atoms. A BEC has also been produced by evaporative cooling following hybrid transport. The next experimental steps will be to optimise the hybrid transfer approach further and install the high resolution imaging system.The system is well-placed to continue an ongoing series of experiments in which ultracold atoms are trapped in RF-dressed potentials. These potentials will be used to study low-dimensional quantum gases as well as in experiments where small atom number BECs are rapidly rotated to enter the fractional quantum Hall regime.
Atom chips are devices used to magnetically trap and manipulate ultracold atoms and Bose-Einstein condensates near a surface. In particular, permanent magnetic film atom chips can allow very tight confinement and intricate magnetic field designs while circumventing technical current noise. Research described in this thesis is focused on the development of a magnetic film atom chip, the production of Bose-Einstein condensates near the film surface, the characterisation of the associated magnetic potentials using rf spectroscopy of ultracold atoms and the realisation of a precision sensor based on splitting Bose-Einstein condensates in a double-well potential. The atom chip itself combines the edge of a perpendicularly magnetised GdTbFeCo film with a machined silver wire structure. A mirror magneto-optical trap collects up to 5 x 108 87Rb atoms beneath the chip surface. The current-carrying wires are then used to transfer the cloud of atoms to the magnetic film microtrap and radio frequency evaporative cooling is applied to produce Bose-Einstein condensates consisting of 1 x 105 atoms. We have identified small spatial magnetic field variations near the film surface that fragment the ultracold atom cloud. These variations originate from inhomogeneity in the film magnetisation and are characterised using a novel technique based on spatially resolved radio frequency spectroscopy of the atoms to map the magnetic field landscape over a large area. The observations agree with an analytic model for the spatial decay of random magnetic fields from the film surface. Bose-Einstein condensates in our unique potential landscape have been used as a precision sensor for potential gradients. We transfer the atoms to the central region of the chip which produces a double-well potential. A single BEC is formed far from the surface and is then dynamically split in two by moving the trap closer to the surface. After splitting, the population of atoms in each well is extremely sensitive to the asymmetry of the potential and can be used to sense tiny magnetic field gradients or changes in gravity on a small spatial scale.
This thesis describes recent experiments conducted on a Bose-Einstein condensate in an optical waveguide. This optical potential confines the atoms against gravity in the vertical dimension, guiding them to freely propagate in the horizontal. Being supported against gravity enables long expansion times of hundreds of milliseconds, facilitating techniques such as delta-kick cooling. In an ideal atom interferometer, the beamsplitters would impart a large momentum splitting between the interfering states in order to increase the signal. However, their effective use requires both an even narrower momentum width source and good vibration isolation. Three such techniques were investigated in this thesis: reflection from a repulsive light potential barrier, Bragg transitions from an optical lattice (which are effectively bouncing atoms off a moving grating), and Bloch-acceleration by loading the atoms into such an optical lattice and then accelerating the combined system. It is found that a combination of both Bragg and Bloch provides the most promising route to truly large momentum transfer in a system which is sensitive only to acceleration. Lastly, large-momentum transfer techniques can be used to effectively increase the way in which the output signal scales with time, creating interferometers which generate the same sensitivity faster (increasing the bandwidth of a sensor), or generate a much better sensitivity in the same time. We form a dual condensate of both rubidium-85 an rubidium-87 via sympathetic cooling. The collisional properties of Rubidium-85 can be modified by applying an external magnetic field, at an easy-to-experimentally-reach value of between 150-170G. It turns out that this combination of atomic isotopes is ideal for an interferometric test of the weak equivalence principle, one of the underpinnings of General Relativity. This thesis also presents the results of the first Bose-condensed version of such a dual-species interferometer. By removing any 87Rb left after condensation, we have created a pure 85Rb BEC. Using this we can now explore how the inter-atomic interactions affect the phase shift of a condensed atom interferometer, as we have complete control over the interaction strength. A condensate with no inter-particle interactions should behave like an ideal particle. With a small attractive interaction between atoms, it is possible to create a self-trapped cloud of atoms which propagates dispersionlessly. This cloud is known as a soliton, and it is predicted to have even more interesting quantum mechanical properties. For example it is predicted that by colliding two such solitons, an entangled state can be generated. Our results indicate that the dispersionless character of the soliton out-performs all other interaction strengths in an atom interferometer, including even the non-interacting cloud.
Atom optics has been a highly active field of research with many scientific breakthroughs over the past two decades, largely due to successful advances in laser technology, microfabrication techniques, and the development of laser cooling and trapping of neutral atoms. This dissertation details several atom optics experiments with the motivation to develop tools and techniques for precision atom wave interferometry. It provides background information about atom optics and the fundamentals behind laser cooling and trapping, including basic techniques for cold gas thermometry and absorptive detection of atoms. A brief overview of magnetic trapping and guiding in tight wire-based traps is also provided before the experimental details are presented. ❧ We developed a novel laser source of 780 nm light using frequency-doubled 1560 nm fiber amplifier. This laser system provided up to a Watt of tunable frequency stabilized light for two Rb laser cooling and trapping experiments. One system generates Bose-Einstein condensates in an optical trap while the second is based on atom chip magnetic traps. The atom chip system, detailed in this thesis, was designed and built to develop the tools necessary for transport and loading large numbers of cold atoms and explore the potential for guided atom interferometry. Techniques and results from this experiment are presented, including an efficient magnetic transport and loading method to deliver cold atom to atom chip traps. We also developed a modeling tool for the magnetic fields formed by coiled wire geometries, as well as planar wire patterns. These models helped us design traps and determine adiabatic transportation of cold atoms between macro-scale traps and micro-traps formed on atom chips. Having achieved near unity transfer efficiency, we demonstrated that this approach promises to be a consistent method for loading large numbers of atoms into micro-traps. Furthermore, we discuss an in situ imaging technique to investigate magnetic field contours of the traps and the dynamics of atoms within those confining potentials. We also controlled the propagation along the atom chip guides by accelerating atoms with longitudinal magnetic gradients, and investigated an atom focusing scheme. ❧ While the atom chip wire guides perform a role analogous to optical fibers guiding light waves, ""free space"" cold atoms offer great opportunity for precision interferometry. We describe a second on-going atom optics experiment that measures gravity gradients using a pair of atom fountain interferometers separated by one meter. We have demonstrated Gravity Gradiometer resolution down to 4x10⁻⁹ g/m using a 40 kg test mass. The atomic physics subsystem is described in detail, including the vacuum, cold atom source, optics, magnetic coils and shields, and vibration isolation and compensation. The system is designed to be a compact, robust, transportable instrument, taking strides towards future gravity gradient measurements in the field. In the realm of space applications, there has been interest for micro-gravity science experiments aboard the International Space Station, along with instrument development for gravity mapping of Earth and planetary bodies with satellite-based instruments. Furthermore, there are ground-based applications for gravity imaging of local density distributions, precision measurement of gravity, as well as proposals for redefining the kilogram, detecting gravitational waves and determining the Gravitational constant.