In the pursuit of developing a quantum information network, photons appear to be the most convenient carriers to interconnect distant ports. The need to get on-demand single photons that is one and only one photon, with a high reliability, is the main driving force for the development of bright solid-state sources. One important parameter is the brightness defined as the probability that one collected pulse contains a single photon. For some applications like quantum information processing or long distance quantum communications, the emitted single photons must be also indistinguishable, so that can make use of their quantum interference to implement effective photon-photon interactions. To reach the ideal source of single and indistinguishable photons, different systems are explored : defects in diamond (NV centers), trapped atoms or ions, single molecules or semiconductor quantum dots.By coupling a semiconductor quantum dot to an optical cavity, the spontaneous emission of the emitter can be modified to obtain bright single-photon sources. An innovative technique was developed by Pr. Pascale Senellart and her team at the Laboratory of Photonics and Nanostructures (LPN) from CNRS that allows making such sources in a very reproducible way.This work explores the performance of single quantum dot coupled to micropillars. Various techniques are used in order to increase the single photon purity and indistinguishability while keeping a high source brightness. First, the cavity was modified using an adiabatic architecture such that a strong acceleration of the spontaneous emission was implemented. Then, a technique to apply an electric bias on the micropillars has been developed. The combination of the electric bias with a resonant optical excitation of the quantum dot allows to generation purely indistinguishable photons with a high brightness.The results developed in this thesis open a vast field of novel applications in quantum technologies, from quantum cryptography, metrology to quantum imaging.
In the pursuit of developing a quantum information network, photons appear to be the most convenient carriers to interconnect distant ports. The need to get on-demand single photons that is one and only one photon, with a high reliability, is the main driving force for the development of bright solid-state sources. One important parameter is the brightness defined as the probability that one collected pulse contains a single photon. For some applications like quantum information processing or long distance quantum communications, the emitted single photons must be also indistinguishable, so that can make use of their quantum interference to implement effective photon-photon interactions. To reach the ideal source of single and indistinguishable photons, different systems are explored : defects in diamond (NV centers), trapped atoms or ions, single molecules or semiconductor quantum dots.By coupling a semiconductor quantum dot to an optical cavity, the spontaneous emission of the emitter can be modified to obtain bright single-photon sources. An innovative technique was developed by Pr. Pascale Senellart and her team at the Laboratory of Photonics and Nanostructures (LPN) from CNRS that allows making such sources in a very reproducible way.This work explores the performance of single quantum dot coupled to micropillars. Various techniques are used in order to increase the single photon purity and indistinguishability while keeping a high source brightness. First, the cavity was modified using an adiabatic architecture such that a strong acceleration of the spontaneous emission was implemented. Then, a technique to apply an electric bias on the micropillars has been developed. The combination of the electric bias with a resonant optical excitation of the quantum dot allows to generation purely indistinguishable photons with a high brightness.The results developed in this thesis open a vast field of novel applications in quantum technologies, from quantum cryptography, metrology to quantum imaging.
In the fields of quantum communications and quantum computing, the transmission of information using single photons guarantees the security of the communication and enables calculations that would be impossible with our "classical" computers. One of the key elements in implementing such protocols is the photon source. It must emit, on demand, one and only one photon with specific quantum properties.The aim of this project is to characterise a source of single and indistinguishable photons, designed and manufactured at CEA-Grenoble, and consisting of an indium arsenide (InAs) semiconductor quantum dot integrated into a gallium arsenide (GaAs) nanocavity. With its low quality factor, the nanocavity enables photons to be extracted efficiently over a wide range of wavelengths (30nm). In addition, thanks to its small mode volume, the spontaneous emission of quantum dots within it can be accelerated by Purcell effect (Purcell factor up to 6).In this manuscript, we first detail the implementation and the optimisation of the experimental setups used to characterise the photons emitted by our sample : microphotoluminescence, radiative lifetime measurement, Hanbury-Brown and Twiss (HBT) experiment and Hong-Ou-Mandel (HOM) experiment. Then, we present the experimental results obtained for photons emitted by two distinct quantum dots : One containing neutral exciton states, and the second, containing a charged exciton state. In order to photo-create these exciton states in the quantum dots, two pulsed optical excitation schemes were implemented: the two-photon resonant excitation of the neutral biexciton, and the phonon-assisted quasi-resonant excitation of the neutral and charged excitons. We present the measurement of the three figures of merit of a single photon source for these two quantum dots : the brightness, the single-photon purity and the indistinguishability of the emitted photons. In a second phase, we will focus on the charged exciton state and measure the profile of its emission line and its autocorrelation function under continuous resonant excitation. These results, achieved within the nano-photonics group of the University of Basel, constitute the first demonstration of continuous excitation on these nanostructures, which is a good surprise given their small size.Finally, we will look at the effects of the application of mechanical stress on the energy separation of the two neutral exciton states, known as the "fine structure splitting" (FSS). During the radiative cascade of the neutral biexciton state, the two photons emitted are entangled in polarisation, and the fidelity of the entanglement depends in particular on the FSS. Here, we will consider a second sample, where the InAs quantum dots are embedded in a GaAs photonic nanowire. By bending the nanowire, mechanical stresses are applied to the quantum dots, which will modify the energy of the exciton states. We will present an experimental study aimed at observing a possible effect on the fine structure splitting.In conclusion, we have developed and optimised various experimental setups for characterising photon sources for applications in the fields of quantum communications and quantum computing. For a first version of these photonic nanostructures, the brightness, the single-photon purity and the indistinguishability of the photons emitted by our quantum dots integrated into nanocavities are very encouraging for the future. The next objectives are to improve the nanocavities and to characterise the decoherence phenomena and the mechanical coupling between the quantum dots and these nanostructures.
Semiconductor quantum dots (QDs) coupled with optical microcavities provide an excellent platform for generating high-performance single-photon sources. However, the current microcavity structures are difficult to solve the tradeoff between single-photon purity and indistinguishability without additional filtering, due to challenges in suppressing broad phonon sideband spectrum and two-photon emission in the practical experiments. To address these issues, we have developed a novel asymmetric microcavity that supports two nondegenerate polarized modes, both resonant with a single quantum dot. One cavity mode is broadband and is used for excitation to reduce two-photon emission intensity, while the other is narrowband and is used for collection to enhance the indistinguishability of single-photon sources. This asymmetric microcavity also has the ability to overcome at least half of the photon efficiency loss under polarization filtering. Moreover, our model has employed an excitation pulse that resonates with cavity modes eliminating spectral distortion of intracavity fields, and efficiently achieving deterministic population inversion of QDs compared to an elliptical cavity. Our scheme paves the way to develop the excellent performance single-photon sources with higher brightness, near-unity purity, and indistinguishability without any additional filtering in practical experiments.
The nitrogen-vacancy defect in diamond (NV centre) is a leading candidate for solid-state implementations of quantum information technologies. Among other useful properties, it is a bright source of single photons. It is difficult, though, to collect the emitted photons in a single spatial and spectral mode which is often needed for quantum information applications. One way to improve the single-mode collection efficiency is to embed an NV centre in a high-finesse cavity. The coupling of the NV centre dipole to the cavity mode gives rise to the Purcell enhancement -- an increase of the emission into the cavity's spectral and spatial mode.
The goal of this project will be to develop a fibre-based microcavity and to use it for the observation of enhanced single-photon emission from a diamond nanocrystal. It will involve a wide range of experimental techniques, for example basic optics (particularly Gaussian beam propagation), CO2 laser ablation, surface analysis by optical and atomic force microscopes, interferometry, photon counting, etc. There will also be a certain amount of data analysis, simulations and theoretical calculations.
The advent of quantum computation promises exciting advances, not only in fields like medicine and metrology, but many industries that rely on parameter-heavy calculations or simulation of molecular interaction. At the same time Shor's algorithm for quantum computers presents a threat to current asymmetric encryption protocols used in everyday communication. Flying qubits, i.e. single-photons, can help mitigate this problem via quantum key distribution, which is insusceptible to an increase in computational power. In addition, they can link quantum computers, forming a quantum network, so that quantum states can be transmitted between them. Sources of flying qubits need good performance in key metrics like single--photon purity, repetition rate, indistinguishability and brightness to become useful in these applications. They should ideally emit strongly entangled pairs of photons and be matched to other quantum technologies in bandwidth and emission energy. In this thesis the emission characteristics of single epitaxial quantum dots, the single-photon source of our choice, are investigated. Strongly entangled photon-pair emission is demonstrated for three different quantum-dot systems: InAsP quantum dots embedded in nanowire waveguides, suitable for integration into photonic circuits, show emission of single photons and entangled photon pairs under non-resonant and quasi-resonant excitation. Violation of Bell's inequality is demonstrated using the traditional set of polarization angles. GaAs quantum dots grown in droplet--etched nanoholes are tested with two resonant excitation methods: Using resonance fluorescence, near-unity indistinguishability and re-excitation limited single-photon purity, albeit not simultaneously with laser-inherited bandwidth, are measured. Using two-photon resonant excitation we set a new standard for single-photon purity, can generate pairs of entangled photons but suffer from reduced indistinguishability. In addition, nanofabrication of paraboloid shaped reflectors for enhanced extraction efficiency of photons and strain-tuning of the emission energy into resonance with the 87Rb D1-line are demonstrated. Strain-tunable InAs quantum dots emitting in the telecom C-band are investigated under above-band excitation and two different resonant two-photon excitation techniques, all of which cause pure single-photon emission. Using the robust phonon-assisted two-photon excitation technique, close-to ideal entangled photon-pair emission is demonstrated. For many of these findings photon arrival times were recorded over many hours with temporal precision on the order of 10 ps. We have developed a user-friendly, yet versatile piece of software in order to extract as much information as possible from this vast amount of data. These results will facilitate integration of quantum dot based single- and entangled-photon sources into future quantum networks and quantum key distribution systems.
Developing reliable and efficient single-photon sources is crucial for advancing quantum technologies, relying on nonlinear frequency conversion or spontaneous emission from individual quantum emitters. While different types of single-photon sources excel in specific applications, none meet all criteria for an “ideal” source: exceptional brightness, high purity, and indistinguishability. To address this challenge, coupling single-photon emitters with designer nanostructures can significantly enhance emission performance, a pivotal area in quantum nanophotonics. This review summarizes recent advancements over the past decade in generating and manipulating single photons, emphasizing the pivotal role of nanostructure coupling. Single-photon emission systems—such as nonlinear crystals, solid-state defects, quantum dots, carbon nanotubes, and two-dimensional materials—are categorized quantitatively based on their ability to achieve high purity, indistinguishability, and brightness, presented in a three-dimensional technology map. Furthermore, nanostructure engineering is showcased for manipulating properties such as emission direction, polarization, chirality, and entanglement of single photons. By elucidating these critical aspects, this review aims to advance understanding of how advancements in nanostructured environments promise to shape the future of single-photon generation and manipulation within quantum nanophotonics.
Generating identical photons from remote emitter-based bright single-photon sources is an important step for scaling up optical quantum technologies. Here, we study the Hong-Ou-Mandel interference of photons emitted from remote sources based on semiconductor quantum dots (QDs). We make use of a deterministic fabrication technique to position the QDs in a spectrally resonant micropillar cavity and fine-tune their operation wavelength electrically. In doing so, we can match four pairs of sources between five distinct sources, study them under various excitation schemes, and measure their degree of indistinguishability. We demonstrate remote indistinguishabiltity between 44 ± 1% and 69 ± 1% depending on the pair of sources and excitation conditions, record values for QDs in cavities. The relative contribution of pure dephasing and spectral diffusion is then analyzed, revealing that the remaining distinguishability is mostly due to low-frequency noise.