The density matrix renormalization group (DMRG) has an underlying variational ansatz, the matrix product state (MPS). The accuracy of this ansatz is controlled by its virtual dimension. In most applications for quantum chemistry this parameter is very large, and the high-accuracy or FCI regime is studied. With a good orbital choice and ordering, and by exploiting the symmetry group of the Hamiltonian, DMRG then allows to retrieve highly accurate results in active spaces beyond the reach of FCI. However, DMRG can also be of use with smaller virtual dimensions. I will discuss how fundamental ideas from Hartree-Fock (HF) theory are transferable to DMRG. Both methods have a variational ansatz. The time-independent variational principle leads for HF and DMRG to a self-consistent mean-field theory in the particles and lattice sites, respectively. The time-dependent variational principle results in the random-phase approximation (RPA). RPA reveals the elementary excitations: particle and site excitations for HF and DMRG, respectively. Exponentiation of these excitations provides a nonredundant parameterization of the ansatz manifold, formulated by Thouless’ theorem. A Taylor expansion in the nonredundant parameters leads to the configuration interaction expansion. I will also discuss how auxiliary field quantum Monte Carlo for Slater determinants can be extended for matrix product states.
The density matrix renormalization group (DMRG) has an underlying variational ansatz, the matrix product state (MPS). The accuracy of this ansatz is controlled by its virtual dimension. In most applications for quantum chemistry this parameter is very large, and the high-accuracy or FCI regime is studied. With a good orbital choice and ordering, and by exploiting the symmetry group of the Hamiltonian, DMRG then allows to retrieve highly accurate results in active spaces beyond the reach of FCI. However, DMRG can also be of use with smaller virtual dimensions. I will discuss how fundamental ideas from Hartree-Fock (HF) theory are transferable to DMRG. Both methods have a variational ansatz. The time-independent variational principle leads for HF and DMRG to a self-consistent mean-field theory in the particles and lattice sites, respectively. The time-dependent variational principle results in the random-phase approximation (RPA). RPA reveals the elementary excitations: particle and site excitations for HF and DMRG, respectively. Exponentiation of these excitations provides a nonredundant parameterization of the ansatz manifold, formulated by Thouless’ theorem. A Taylor expansion in the nonredundant parameters leads to the configuration interaction expansion. I will also discuss how auxiliary field quantum Monte Carlo for Slater determinants can be extended for matrix product states.
The density matrix renormalization group (DMRG) has an underlying variational ansatz, the matrix product state (MPS). The accuracy of this ansatz is controlled by its virtual dimension. In most applications for quantum chemistry this parameter is very large, and the high-accuracy or FCI regime is studied. With a good orbital choice and ordering, and by exploiting the symmetry group of the Hamiltonian, DMRG then allows to retrieve highly accurate results in active spaces beyond the reach of FCI [1,2]. However, DMRG can also be of use with smaller virtual dimensions. I will discuss how fundamental ideas from Hartree-Fock (HF) theory are transferable to DMRG. Both methods have a variational ansatz. The time-independent variational principle leads for HF and DMRG to a self-consistent mean-field theory in the particles and lattice sites, respectively. The time-dependent variational principle results in the random-phase approximation (RPA). RPA reveals the elementary excitations: particle and site excitations for HF and DMRG, respectively. Exponentiation of these excitations provides a nonredundant parameterization of the ansatz manifold, formulated by Thouless’ theorem. A Taylor expansion in the nonredundant parameters leads to the configuration interaction expansion [3,4]. References [1] S. Wouters, W. Poelmans, P. W. Ayers and D. Van Neck, Computer Physics Communications 185, 1501-1514 (2014). [2] S. Wouters, T. Bogaerts, P. Van Der Voort, V. Van Speybroeck and D. Van Neck, Journal of Chemical Physics 140, 241103 (2014). [3] S. Wouters, N. Nakatani, D. Van Neck and G. K.-L. Chan, Physical Review B 88, 075122 (2013). [4] N. Nakatani, S. Wouters, D. Van Neck and G. K.-L. Chan, Journal of Chemical Physics 140, 024108 (2014).
During the past 15 years, the density matrix renormalization group (DMRG) has become increasingly important for ab initio quantum chemistry. The underlying matrix product state (MPS) ansatz is a low-rank decomposition of the full configuration interaction tensor. The virtual dimension of the MPS controls the size of the corner of the many-body Hilbert space that can be reached. Whereas the MPS ansatz will only yield an efficient description for noncritical one-dimensional systems, it can still be used as a variational ansatz for other finite-size systems. Rather large virtual dimensions are then required. The two most important aspects to reduce the corresponding computational cost are a proper choice and ordering of the active space orbitals, and the exploitation of the symmetry group of the Hamiltonian. By taking care of both aspects, DMRG becomes an efficient replacement for exact diagonalization in quantum chemistry. DMRG and Hartree-Fock theory have an analogous structure. The former can be interpreted as a self-consistent mean-field theory in the DMRG lattice sites, and the latter in the particles. It is possible to build upon this analogy to introduce post-DMRG methods. Based on an approximate MPS, these methods provide improved ansätze for the ground state, as well as for excitations. Exponentiation of the single-particle (single-site) excitations for a Slater determinant (an MPS with open boundary conditions) leads to the Thouless theorem for Hartree-Fock theory (DMRG), an explicit nonredundant parameterization of the entire manifold of Slater determinants (MPS wavefunctions). This gives rise to the configuration interaction expansion for DMRG. The Hubbard-Stratonovich transformation lies at the basis of auxiliary field quantum Monte Carlo for Slater determinants. An analogous transformation for spin-lattice Hamiltonians allows to formulate a promising variant for MPSs.
The similarities between Hartree-Fock (HF) theory and the density matrix renormalization group (DMRG) are explored. Both methods can be formulated as the variational optimization of a wave-function Ansatz. Linearization of the time-dependent variational principle near a variational minimum allows to derive the random phase approximation (RPA). We show that the nonredundant parameterization of the matrix product state (MPS) tangent space [J. Haegeman, J. I. Cirac, T. J. Osborne, I. Pi\ifmmode \check{z}\else \v{z}\fi{}orn, H. Verschelde, and F. Verstraete, Phys. Rev. Lett. 107, 070601 (2011)] leads to the Thouless theorem for MPS, i.e., an explicit nonredundant parameterization of the entire MPS manifold, starting from a specific MPS reference. Excitation operators are identified, which extends the analogy between HF and DMRG to the Tamm-Dancoff approximation (TDA), the configuration interaction (CI) expansion, and coupled cluster theory. For a small one-dimensional Hubbard chain, we use a CI-MPS Ansatz with single and double excitations to improve on the ground state and to calculate low-lying excitation energies. For a symmetry-broken ground state of this model, we show that RPA-MPS allows to retrieve the Goldstone mode. We also discuss calculations of the RPA-MPS correlation energy. With the long-range quantum chemical Pariser-Parr-Pople Hamiltonian, low-lying TDA-MPS and RPA-MPS excitation energies for polyenes are obtained.
The density matrix renormalization group (DMRG) is a numerical method for studying low dimensional strongly correlated models. The study of these models is one of the most active areas of condensed matter physics today and has been spurred not only by the discovery of high temperature superconductivity but also by experiments on new compounds. In this thesis we study fundamentals of the density matrix renormalization group method as well as applications of the method to Heisenberg spin chains. The introductory text is meant as a brief overview of the DMRG as well as Heisenberg spin systems and provides an introduction to the papers. In papers I and II we investigate the density matrix renormalization group with the aim to better understand the underlying structure of the method. We find that if the renormalization converges to a fixed point in the thermodynamic limit, the resulting basis states can be written as a matrix product form. We also show an explicit relation of the DMRG to variational calculations using the fact that the matrix product states can be rederived through a variational ansatz without any reference to the DMRG calculation. It is then shown how the matrix product states can be used to define a set of Bloch waves for describing elementary excitations of the Heisenberg spin-1 chain. The low lying energy spectrum is calculated. In papers III and IV we investigate the thermodynamics of impurities in a spin-1/2 chain. For this purpose we have shown that a recently developed transfer matrix DMRG method can be used to calculate impurity properties. Both impurity corrections to thermodynamic properties and local properties at finite temperature can be obtained. The method gives quicker and more accurate results than quantum Monte Carlo. The numerical results show good agreement with field theory calculations for a number of impurity configurations and the cross-over function for the magnetic susceptibility from high- to low-temperature behavior shows the expected data collapse. Our results also give quantitative predictions for experiments on doped spin-1/2 chains.
An implementation of the single-site density matrix renormalization group (DMRG) approach for the quantum-chemical application to calculate approximate as well as exact electronic ground-state energies and wave functions of atoms and molecules is presented.The algorithm is formulated in terms of the variational and sizeconsistent class of wave functions, matrix product states, and their operator analogues, matrix product operators.A procedure to construct quantum-chemical Hamiltonian operators with long-range Coulomb interactions as matrix product operators is developed.The many-electron Hamiltonian operators are represented as sums and products of one-electron operators.For the efficient matrix product operator construction of quantum-chemical Hamiltonians, different basis spaces including discrete position and momentum space as well as molecular and atomic orbitals are investigated.Discrete position space yields the best matrix product operator size scaling, but introduces artificial long-range couplings in the kinetic energy term of the Hamiltonian which are a consequence of the DMRG algorithm in terms of matrix product states.The huge amount of discrete space points needed for an accurate description poses a problem because of the electron-electron interaction.Therefore, a momentum space or Fourier series expansion of the electron-electron interaction is shown which makes it possible to compress its matrix product operator representation.DMRG applied to quantum-chemical Hamiltonians in matrix product operator form can serve as means to directly (without mean-field treatment in advance) investigate quantum-chemical problems and find the analytically exact ground-state solution of small atoms and molecules.The next basis space analyzed in detail is the atomic orbital basis.The matrix product operator construction and the direct application of the DMRG method in this basis is examined.A physical compression scheme based on a singular value decomposition of the electron-electron interaction in the atomic orbital basis is demonstrated.Furthermore, DMRG calculations in the atomic orbital basis for certain systems where mean-field theory yields qualitatively wrong results and where higher-order approximative correction methods like truncated configuration interaction and coupled cluster cannot fully capture strong electron correlation effects are compared to results obtained in the molecular orbital basis.The comparison shows that atomic orbitals describe the physical situation well and thus lead to a tremendous reduction of the matrix product state dimension and the computational effort.i
Renormalization is a powerful concept in the many-body problem. Inspired by the highly successful density matrix renormalization group (DMRG) algorithm, and the quantum chemical graphical representation of configuration space, we introduce a new theoretical tool: Hilbert space renormalization, to describe many-electron correlations. While in DMRG, the many-body states in nested Fock subspaces are successively renormalized, in Hilbert space renormalization, many-body states in nested Hilbert subspaces undergo renormalization. This provides a new way to classify and combine configurations. The underlying wavefunction Ansatz, namely, the Hilbert space matrix product state (HS-MPS), has a very rich and flexible mathematical structure. It provides low-rank tensor approximations to any configuration interaction (CI) space through restricting either the "physical indices" or the coupling rules in the HS-MPS. Alternatively, simply truncating the "virtual dimension" of the HS-MPS leads to a family of size-extensive wave function Ansätze that can be used efficiently in variational calculations. We make formal and numerical comparisons between the HS-MPS, the traditional Fock-space MPS used in DMRG, and traditional CI approximations. The analysis and results shed light on fundamental aspects of the efficient representation of many-electron wavefunctions through the renormalization of many-body states.