Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Chinese Physics Letters

Proposal of A New Space Atomic Frequency Standard

Xinqi Wang, Yuzhu Wang

Published Jul 1, 1999• 2 citations
Publisher

Abstract

A new prototype atomic fountain clock working in the micro-gravity environment is proposed. The successive Ramsey interactions of cold atoms and oscillatory field are realized by means of computer-controlled periodic motion of oscillatory field while the cold atoms stay still relatively in the prototype. Preliminary analyses in comparison with the atomic fountain clock working on the ground show that higher stability is obtainable in the prototype.

DOI
10.1088/0256-307x/16/7/004

Related papers

Test of a space cold atom clock prototype in the absence of gravity

P. Lemonde, Philippe Laurent, E. Simon +5 more

We describe a space cold atom clock prototype and its operation on board an aircraft. We have recorded the atomic resonance in zero gravity during parabolic flights. This experiment must be considered as an essential step toward the construction of a space clock using cold atoms. In a microgravity environment, a cold atomic clock would outperform all ground-based clocks. By the year 2002, we plan to operate a cold atom clock on board the international space station. This mission is called Atomic Clock Ensemble in Space (ACES). We have also performed a preliminary accuracy evaluation of the prototype. The interrogation of the cold atoms is performed inside a TE/sub 013/ cavity. On earth, the phase variations of the field induce a relative frequency shift of about 1/spl times/10/sup -13/. Although the frequency shift is expected to strongly decrease in microgravity, this cavity does not seem suitable for a 1/spl times/10/sup -16/ frequency uncertainty.

IEEE Transactions on Instrumentation and Measurement•Apr 1, 1999•14 citations

Tests of Cold Atom Clock in Orbit

Liang Liu, Desheng Lü, Weibiao Chen +23 more

Since the atomic clock was invented, its performance has been improved for one digit every decade until 90s of last century when the traditional atomic clock almost reached its limit. With laser cooled atoms, the performance can be further improved, and nowadays the cold atom based clocks are widely used as primary frequency standards. Such a kind of cold atom clocks has great applications in space. This paper presents the design and tests of a cold atom clock (CAC) operating in space. In microgravity, the atoms are cooled, trapped, launched and finally detected after being interrogated by microwave field with Ramsey method. The results of laser cooling of atoms in microgravity in orbit are presented and compared with that on ground for the first time. That the full width at half maximum (FWHM) of obtained central Ramsey fringes varies linearly with launching velocity of cold atoms shows the effects of microgravity. With appropriate parameters, a closed-loop locking of the CAC is realized in orbit and the estimated short term frequency stability of $3.0\times 10 ^{-13}/\sqrt{τ}$ has been reached.

arXiv:1709.03256•Sep 11, 2017•4 citations

Cold atom microwave clock based on intracavity cooling in China space station

Siminda Deng, Wei Ren, Jingfeng Xiang +9 more

Abstract Atomic clocks with higher frequency stability and accuracy than traditional space-borne atomic clocks are the cornerstone of long-term autonomous operation of space-time-frequency systems. We proposed a space cold atoms clock based on an intracavity cooling scheme, which captures cold atoms at the center of a microwave cavity and then executes in situ interactions between the cold atoms and microwaves. As a result of the microgravity environment in space, the cold atoms can interact with the microwaves for a longer time, which aids in realizing a high-precision atomic clock in space. This paper presents the overall design, operational characteristics, and reliability test results of the space atomic clock based on the intracavity cooling scheme designed for the operation onboard the China space station. In addition, the engineering prototype performance of the space cold atoms microwave clock is also presented. The ground test results for the clock show a fractional frequency stability of 1.1 × 10−12 τ−1/2 reaching 2.5 × 10−15 at 200,000 s, providing solid technical and data support for its future operation in orbit.

npj Microgravity•Jun 6, 2024•9 citations

In-orbit operation of an atomic clock based on laser-cooled 87Rb atoms

Liang Liu, Desheng Lü, Weibiao Chen +23 more

Abstract Atomic clocks based on laser-cooled atoms are widely used as primary frequency standards. Deploying such cold atom clocks (CACs) in space is foreseen to have many applications. Here we present tests of a CAC operating in space. In orbital microgravity, the atoms are cooled, trapped, launched, and finally detected after being interrogated by a microwave field using the Ramsey method. Perturbing influences from the orbital environment on the atoms such as varying magnetic fields and the passage of the spacecraft through Earth’s radiation belt are also controlled and mitigated. With appropriate parameters settings, closed-loop locking of the CAC is realized in orbit and an estimated short-term frequency stability close to 3.0 × 10 −13 τ −1/2 has been attained. The demonstration of the long-term operation of cold atom clock in orbit opens possibility on the applications of space-based cold atom sensors.

Nature Communications•Jul 11, 2018•189 citations

Physics package based on intracavity laser cooling 87Rb atoms for space cold atom microwave clock

Siminda 思敏达 Deng 邓, Wei 伟 Ren 任, Jingfeng Xiang +9 more

Abstract This article proposes a new physics package to enhance the frequency stability of the space cold atom clock with the advantages of a microgravity environment. Clock working processes, including atom cooling, atomic state preparation, microwave interrogation, and transition probability detection, are integrated into the cylindrical microwave cavity to achieve a high-performance and compact physics package for the space cold atom clock. We present the detailed design and ground-test results of the cold atom clock physics package in this article, which demonstrates a frequency stability of 1.2 × 10−12 τ −1/2 with a Ramsey linewidth of 12.5 Hz, and a better performance is predicted with a 1 Hz or a narrower Ramsey linewidth in microgravity environment. The miniaturized cold atom clock based on intracavity cooling has great potential for achieving space high-precision time-frequency reference in the future.

Chinese Physics B•May 15, 2024•4 citations

Test of a space cold atom clock prototype in absence of gravity

P. Lemonde, Philippe Laurent, E. Simon +5 more

In space, thanks to micro-gravity conditions, a clock using laser cooled atoms is expected to have a better performance than on Earth. We have constructed a prototype of this space clock. It was tested in the absence of gravity of aircraft parabolic flights, yielding an atomic resonance with a width of 7 Hz, twice narrower than on Earth.

Conference on Precision Electromagnetic Measurements•Nov 27, 2002•9 citations
A new prototype atomic fountain clock working in the micro-gravity environment is proposed. The successive Ramsey interactions of cold atoms and oscillatory field are realized by means of computer-controlled periodic motion of oscillatory field while the cold atoms stay still relatively in the prototype. Preliminary analyses in comparison with the atomic fountain clock working on the ground show that higher stability is obtainable in the prototype.
We describe a space cold atom clock prototype and its operation on board an aircraft. We have recorded the atomic resonance in zero gravity during parabolic flights. This experiment must be considered as an essential step toward the construction of a space clock using cold atoms. In a microgravity environment, a cold atomic clock would outperform all ground-based clocks. By the year 2002, we plan to operate a cold atom clock on board the international space station. This mission is called Atomic Clock Ensemble in Space (ACES). We have also performed a preliminary accuracy evaluation of the prototype. The interrogation of the cold atoms is performed inside a TE/sub 013/ cavity. On earth, the phase variations of the field induce a relative frequency shift of about 1/spl times/10/sup -13/. Although the frequency shift is expected to strongly decrease in microgravity, this cavity does not seem suitable for a 1/spl times/10/sup -16/ frequency uncertainty.
Since the atomic clock was invented, its performance has been improved for one digit every decade until 90s of last century when the traditional atomic clock almost reached its limit. With laser cooled atoms, the performance can be further improved, and nowadays the cold atom based clocks are widely used as primary frequency standards. Such a kind of cold atom clocks has great applications in space. This paper presents the design and tests of a cold atom clock (CAC) operating in space. In microgravity, the atoms are cooled, trapped, launched and finally detected after being interrogated by microwave field with Ramsey method. The results of laser cooling of atoms in microgravity in orbit are presented and compared with that on ground for the first time. That the full width at half maximum (FWHM) of obtained central Ramsey fringes varies linearly with launching velocity of cold atoms shows the effects of microgravity. With appropriate parameters, a closed-loop locking of the CAC is realized in orbit and the estimated short term frequency stability of 3.0×10−13/τ3.0\times 10 ^{-13}/\sqrt{τ}3.0×10−13/τ​ has been reached.
Abstract Atomic clocks with higher frequency stability and accuracy than traditional space-borne atomic clocks are the cornerstone of long-term autonomous operation of space-time-frequency systems. We proposed a space cold atoms clock based on an intracavity cooling scheme, which captures cold atoms at the center of a microwave cavity and then executes in situ interactions between the cold atoms and microwaves. As a result of the microgravity environment in space, the cold atoms can interact with the microwaves for a longer time, which aids in realizing a high-precision atomic clock in space. This paper presents the overall design, operational characteristics, and reliability test results of the space atomic clock based on the intracavity cooling scheme designed for the operation onboard the China space station. In addition, the engineering prototype performance of the space cold atoms microwave clock is also presented. The ground test results for the clock show a fractional frequency stability of 1.1 × 10−12 τ−1/2 reaching 2.5 × 10−15 at 200,000 s, providing solid technical and data support for its future operation in orbit.
Abstract Atomic clocks based on laser-cooled atoms are widely used as primary frequency standards. Deploying such cold atom clocks (CACs) in space is foreseen to have many applications. Here we present tests of a CAC operating in space. In orbital microgravity, the atoms are cooled, trapped, launched, and finally detected after being interrogated by a microwave field using the Ramsey method. Perturbing influences from the orbital environment on the atoms such as varying magnetic fields and the passage of the spacecraft through Earth’s radiation belt are also controlled and mitigated. With appropriate parameters settings, closed-loop locking of the CAC is realized in orbit and an estimated short-term frequency stability close to 3.0 × 10 −13 τ −1/2 has been attained. The demonstration of the long-term operation of cold atom clock in orbit opens possibility on the applications of space-based cold atom sensors.
Abstract This article proposes a new physics package to enhance the frequency stability of the space cold atom clock with the advantages of a microgravity environment. Clock working processes, including atom cooling, atomic state preparation, microwave interrogation, and transition probability detection, are integrated into the cylindrical microwave cavity to achieve a high-performance and compact physics package for the space cold atom clock. We present the detailed design and ground-test results of the cold atom clock physics package in this article, which demonstrates a frequency stability of 1.2 × 10−12 τ −1/2 with a Ramsey linewidth of 12.5 Hz, and a better performance is predicted with a 1 Hz or a narrower Ramsey linewidth in microgravity environment. The miniaturized cold atom clock based on intracavity cooling has great potential for achieving space high-precision time-frequency reference in the future.