Communication theory problems incorporating quantum effects for optical-frequency applications are discussed. Under suitable conditions, a unique quantum channel model corresponding to a given classical space-time varying linear random channel is established. A procedure is described by which a proper density-operator representation applicable to any receiver configuration can be constructed directly from the channel output field. Some examples illustrating the application of our methods to the development of optical quantum channel representations are given. Optimizations of communication system performance under different criteria are considered. In particular, certain necessary and sufficient conditions on the optimal detector in M-ary quantum signal detection are derived. Some examples are presented. Parameter estimation and channel capacity are discussed briefly.
Communication theory problems incorporating quantum effects for optical-frequency applications are discussed. Under suitable conditions, a unique quantum channel model corresponding to a given classical space-time varying linear random channel is established. A procedure is described by which a proper density-operator representation applicable to any receiver configuration can be constructed directly from the channel output field. Some examples illustrating the application of our methods to the development of optical quantum channel representations are given. Optimizations of communication system performance under different criteria are considered. In particular, certain necessary and sufficient conditions on the optimal detector in M-ary quantum signal detection are derived. Some examples are presented. Parameter estimation and channel capacity are discussed briefly.
The fundamental performance limits and channel capacity of optical communications systems operating over the free space channel will be examined using quantum detection theory. The performance of the optimum quantum receiver for on-off keying (OOK) and optical binary phase shift keying (BPSK) is first examined as a pure state (no noise) problem. The classical capacity of the binary symmetric channel for these two modulation schemes is then evaluated for the optimum quantum receiver by making use of the concept of quantum measurement states. The performance of M-ary pulse position modulation, which requires a product state representation, is evaluated along with the performance of certain 'dense signal sets.' Performance comparisons with classical techniques shows over 5 dB improvement in some cases when quantum detection is employed. As a further application of the quantum detection theory, the capacity of the binary channel with on-off keyed modulation and quantum detection is evaluated, and shown to exceed the capacity obtained with classical photon counting.
The fundamental performance limits and channel capacity of optical communications systems operating over the free-space channel will be examined using quantum detection theory. The performance of the optimum quantum receiver for on{ofi keying and optical binary phase-shift keying is flrst examined as a pure-state (no-noise) problem. The classical capacity of the binary symmetric channel for these two modulation schemes will be evaluated for the optimum quantum receiver by making use of the concept of quantum measurement states. The performance of M-ary pulse-position modulation, which requires a product state representation, will be evaluated along with the performance of certain dense signal sets. Performance comparisons with classical techniques show an improvement of over 5 dB in some cases when quantum detection is employed. As a further application of the quantum detection theory, the capacity of the binary channel with on{ofi keyed modulation and quantum detection is evaluated and shown to exceed the capacity obtained with classical photon counting.
Born about a century ago, Quantum Mechanics has revolutionized the description and the interpretation of Physics at sub-microscopic level. In the last decades, due to the influence of mathematical and engineering research fields, Quantum Mechanics has given birth to related research areas like Quantum Computation, Quantum Information and Quantum Communication. With the discovery of the laser, and later the development of fiber optics and satellite networks, Quantum Communication and Quantum Optics seems to have a natural field of application in Communication Systems. Despite this, the interest in this technology and studies for communication purpose has been overshadowed by the great results in communication networks achieved in the last decades with classical paradigms. However, due to the increasing demand of communication data rate, system designers are now looking at Quantum Mechanics for new and more performanting solutions in communication purposes. Early theoretical studies on Quantum Discrimination Theory and Quantum Information predict better performance for Communication Systems that take advantage of the quantum laws. In addition, Quantum Mechanics provides the deepest description of the physical phenomena, and there are scenarios where a quantum model fits best, as in in deep space communications, where the received signal is really weak, or in a satellite networks, where we are interested in strongly reducing the power of transmitted signals, possibly without sacrificing performance significantly. However, if on one side Quantum Communication Theory promises great gains in the performance of communication systems, on the other hand it fails to describe how to implement physical devices that reach these ultimate limits. So far, only a few architectures achieving these performances are known, and only for simple modulation formats. We are interested in the scenario of optical communications, where the message transmitted is encoded in a sequence of coherent states. Transmitter devices for coherent modulation are well known and consist in laser pulse generators. Instead, receiver implementations working at the quantum limit performance limit are yet to be found. In this Thesis I deal with different topics in the quantum transmission scenario. First, I review existing classical (suboptimal) and quantum (suboptimal and optimal) receiver schemes for the binary coherent modulation. I present a new formulation of the optimal scheme known as Dolinar Receiver with the multiple copies problem, focusing on the information gained during the measurement. Second, I analyze the binary communication in a noisy environment, studying the error probability and the capacity of the binary channel induced. Given the description of the quantum channel, I optimize both the transmitted quantum states and the measurement operators employed in the communication. Third, I consider the Pulse Position Modulation, that is particularly suitable for space and satellite communication due to its simplicity of implementation and high capacity. I review some known suboptimal receivers, and I propose a receiver scheme which approaches the limit performance predicted with quantum theory outperforming the existing schemes. To sum up the results of this Thesis, in order to approach the limit performance predicted by Quantum Mechanics, an optimization is always necessary to exceed the classical effects and trigger the quantum phenomena. In particular, the information gained during the measurement plays an important role, for example in the definition of adaptive receivers. In this Thesis both these aspects have been deeply investigated.
The fundamental performance limits and channel capacity of optical commu-nications systems operating over the free-space channel will be examined using quantum detection theory. The performance of the optimum quantum receiver for on{ofi keying and optical binary phase-shift keying is flrst examined as a pure-state (no-noise) problem. The classical capacity of the binary symmetric channel for these two modulation schemes will be evaluated for the optimum quantum receiver by making use of the concept of quantum measurement states. The performance of M-ary pulse-position modulation, which requires a product state representation, will be evaluated along with the performance of certain dense signal sets. Perfor-mance comparisons with classical techniques show an improvement of over 5 dB in some cases when quantum detection is employed. As a further application of the quantum detection theory, the capacity of the binary channel with on{ofi keyed modulation and quantum detection is evaluated and shown to exceed the capacity obtained with classical photon counting. I.
Shared communication channels are subject to multiple-access interference. Transmitter and receiver design techniques that explicitly deal with this interference have been shown to improve substantially the performance of communication systems over radio-frequency and other "classical" channels. Quantum multiple-access communication channels, on the other hand, have received comparatively little attention. In this paper, an input-output model for multiple-access quantum channels relevant to optical communications is proposed. The model accounts for multiaccess interference, signal attenuation, and random noise, and can be used in the analysis and design of communication systems. Using a result from optimization, a perturbation method is developed to find the minimum achievable error probability in small-interference channels. It is shown that the quantum measurement that minimizes the error probability in a no-interference channel is robust in the presence of small multiaccess interference. The results are illustrated with numerical examples, which show that optimal quantum detectors can significantly outperform conventional detectors even for moderate levels of crosstalk.
We study the problem of decoding classical information encoded on quantum states at the output of a quantum channel, with particular focus on increasing the communication rates towards the maximum allowed by Quantum Mechanics. After a brief introduction to the main theoretical formalism employed in the rest of the thesis, i.e., continuous-variable Quantum Information Theory and Quantum Communication Theory, we consider several decoding schemes. First, we treat the problem from an abstract perspective, presenting a method to decompose any quantum measurement into a sequence of easier nested measurements through a binary-tree search. Furthermore we show that this decomposition can be used to build a capacity-achieving decoding protocol for classical communication on quantum channels and to solve the optimal discrimination of some sets of quantum states. These results clarify the structure of optimal quantum measurements, showing that it can be recast in a more operational and experimentally-oriented fashion. Second, we consider a more practical approach and describe three receiver structures for coherent states of the electromagnetic field with applications to single-mode state discrimination and multi-mode decoding at the output of a quantum channel. We treat the problem bearing in mind the technological limitations faced nowadays in the field of optical communications: we evaluate the performance of general decoding schemes based on such technology and report increased performance of two schemes, the first one employing a non-Gaussian transformation and the second one employing a code tailored to be read out easily by the most common detectors. Eventually we characterize a large class of multi-mode adaptive receivers based on common technological resources, obtaining a no-go theorem for their capacity.