Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

World Academy of Science, Engineering and Technology, International Journal of Computer, Electrical, Automation, Control and Information Engineering

Plug And Play Interferometer Configuration Using Single Modulator Technique

Norshamsuri Ali, Hafizulfika, Salim Ali Al-Kathiri, Abdulla Al-Attas, Suhairi Saharudin, Mohamed Ridza Wahiddin

Published May 29, 2008• 0 citations
Publisher

Abstract

We demonstrate single-photon interference over 10 km using a plug and play system for quantum key distribution. The quality of the interferometer is measured by using the interferometer visibility. The coding of the signal is based on the phase coding and the value of visibility is based on the interference effect, which result a number of count. The setup gives full control of polarization inside the interferometer. The quality measurement of the interferometer is based on number of count per second and the system produces 94 % visibility in one of the detectors.

DOI
10.5281/zenodo.1056239

Related papers

Plug and Play configuration using two modulator on single Mach-Zehnder Interferometer

Norshamsuri Ali, Hafizulfika, Salim Ali Al-Kathiri +1 more

We experimentally demonstrates a two way quantum key distribution (QKD) system with a single Mach Zehnder interferometer over 10 km standard grade optical fiber. The scheme utilizes optical phase encoding/decoding with polarization of photon maintained through the use of polarization maintaining optical fiber at the transmitting and receiving ends and achieves a visibility of 99%.

National Conference on Telecommunication Technologies and Malaysia Conference on Photonics (NCTT-MCP)•Aug 1, 2008•0 citations

Single-photon interference experiment over 100 km for quantum cryptography system using a balanced gated-mode photon detector

Hideo Kosaka, Akihisa Tomita, Yoshihiro Nambu +2 more

We demonstrate single-photon interference over 100 km using a balanced gated-mode photon detector and a plug & play system for quantum key distribution. The visibility with 0.1 photon/pulse was more than 80% after 100 km transmission. This corresponds to the fidelity of a quantum cryptography system of more than 90% and a QBER of less than 10%, satisfying the security criteria.

arXiv:quant-ph/0306066•Jun 10, 2003•2 citations

Long-distance stable “plug and play” quantum cryptography system

Chunyuan Zhou, Guang Wu, Xiuliang Chen +2 more

We have recently constructed a fiber-optic “plug and play” quantum cryptography system as shown in Fig.1, wherein a Faraday-Mirror was used to compensate the polarization mode dispersion and phase drifts. It worked at 1550 nm and was based on the B92 protocol[1]. We have achieved stable quantum key distribution in a standard telecom fiber with different working-distances of 10, 25 and 50 km, respectively, by using some specifically developed techniques to guarantee long-term stability of our system, such as polarization-independent phase-modulation for stable phase encoding and decoding, hybrid coincidence for efficient detection of single photons with coincidence-gated quenching of the single-photon detectors followed by coincident counting of the avalanche signals, and synchronized detection of single-photon pulses by coincidence counting gated with proper delay and width. These unique techniques greatly enhanced the fringe visibility of single-photon interference. And we have also demonstrated the application of our system in cryptographic communication by sending coded pictures from Alice to Bob using the sifted quantum keys.

Frontiers in Optics•Jan 1, 2003•0 citations

Characterization of polarization-independent phase modulation method for practical plug and play quantum cryptography

Osung Kwon, Min‐Soo Lee, Min Ki Woo +5 more

We characterized a polarization-independent phase modulation method, called double phase modulation, for a practical plug and play quantum key distribution (QKD) system. Following investigation of theoretical backgrounds, we applied the method to the practical QKD system and characterized the performance through comparing single phase modulation (SPM) and double phase modulation. Consequently, we obtained repeatable and accurate phase modulation confirmed by high visibility single photon interference even for input signals with arbitrary polarization. Further, the results show that only 80% of the bias voltage required in the case of single phase modulation is needed to obtain the target amount of phase modulation.

Laser Physics•Oct 22, 2015•6 citations

Single-photon interference experiment over 100 km for quantum cryptography system using balanced gated-mode photon detector

Hideo Kosaka, Akihisa Tomita, Y. Nambu +2 more

The authors demonstrate single-photon interference over 100 km using a balanced gated-mode photon detector and a plug and play system for quantum key distribution. The visibility with 0.1 photon/pulse was more than 80% after 100 km transmission. This corresponds to the fidelity of a quantum cryptography system of more than 90% and a QBER of less than 10%, satisfying the security criteria.

Electronics Letters•Aug 7, 2003•96 citations

“Plug and play” systems for quantum cryptography

A. Muller, T. Herzog, B. Huttner +3 more

We present a time-multiplexed interferometer based on Faraday mirrors, and apply it to quantum key distribution. The interfering pulses follow exactly the same spatial path, ensuring very high stability and self balancing. The use of Faraday mirrors compensates automatically any birefringence effects and polarization dependent losses in the transmitting fiber. First experimental results show a fringe visibility of 0.9984 for a 23-km-long interferometer, based on installed telecom fibers.

arXiv:quant-ph/9611042•Applied Physics Letters•Feb 17, 1997•359 citations
We demonstrate single-photon interference over 10 km using a plug and play system for quantum key distribution. The quality of the interferometer is measured by using the interferometer visibility. The coding of the signal is based on the phase coding and the value of visibility is based on the interference effect, which result a number of count. The setup gives full control of polarization inside the interferometer. The quality measurement of the interferometer is based on number of count per second and the system produces 94 % visibility in one of the detectors.
We have recently constructed a fiber-optic “plug and play” quantum cryptography system as shown in Fig.1, wherein a Faraday-Mirror was used to compensate the polarization mode dispersion and phase drifts. It worked at 1550 nm and was based on the B92 protocol[1]. We have achieved stable quantum key distribution in a standard telecom fiber with different working-distances of 10, 25 and 50 km, respectively, by using some specifically developed techniques to guarantee long-term stability of our system, such as polarization-independent phase-modulation for stable phase encoding and decoding, hybrid coincidence for efficient detection of single photons with coincidence-gated quenching of the single-photon detectors followed by coincident counting of the avalanche signals, and synchronized detection of single-photon pulses by coincidence counting gated with proper delay and width. These unique techniques greatly enhanced the fringe visibility of single-photon interference. And we have also demonstrated the application of our system in cryptographic communication by sending coded pictures from Alice to Bob using the sifted quantum keys.
We characterized a polarization-independent phase modulation method, called double phase modulation, for a practical plug and play quantum key distribution (QKD) system. Following investigation of theoretical backgrounds, we applied the method to the practical QKD system and characterized the performance through comparing single phase modulation (SPM) and double phase modulation. Consequently, we obtained repeatable and accurate phase modulation confirmed by high visibility single photon interference even for input signals with arbitrary polarization. Further, the results show that only 80% of the bias voltage required in the case of single phase modulation is needed to obtain the target amount of phase modulation.