This correspondence investigates soft-decision decoding of binary linear block codes using ordered recodings of test error patterns on the so-called "most reliable basis." The analysis demonstrates the optimality of the most reliable basis by showing that, among all possible bases, the most reliable basis minimizes the list error probability for a very general (and well-defined) class of orderings for recoding operations. The correspondence then proposes a suboptimal algorithm which utilizes reprocessing ordering and incorporates two techniques that render it computationally very efficient: 1) an iterative reference recoding technique which simplifies the recoding operation required for each test error pattern, and 2) an adaptive skipping rule which significantly reduces the average number of recodings. Simulation results with codes of relatively large length show that the proposed algorithm is computationally very efficient in comparison to existing algorithms in the literature
This correspondence investigates soft-decision decoding of binary linear block codes using ordered recodings of test error patterns on the so-called "most reliable basis." The analysis demonstrates the optimality of the most reliable basis by showing that, among all possible bases, the most reliable basis minimizes the list error probability for a very general (and well-defined) class of orderings for recoding operations. The correspondence then proposes a suboptimal algorithm which utilizes reprocessing ordering and incorporates two techniques that render it computationally very efficient: 1) an iterative reference recoding technique which simplifies the recoding operation required for each test error pattern, and 2) an adaptive skipping rule which significantly reduces the average number of recodings. Simulation results with codes of relatively large length show that the proposed algorithm is computationally very efficient in comparison to existing algorithms in the literature
Soft-decision decoding of a linear block code using the most reliable basis corresponding to each received word is investigated. Based either on probabilistic properties or on the structure of the code considered, three improvements to the algorithm devised by Fossorier and Lin (see ibid., vol.41, no.9, p.1379-1396, 1995) are presented. These modifications allow large computation savings or significant decoding speedup with little error performance degradation. First, a reduced probabilistic list of codeword candidates is associated with order-i reprocessing of a given code. It results in a large reduction of the maximum number of computations with a very small degradation in performance. Then, a probabilistic stopping criterion is introduced for order-0 reprocessing. This new test significantly decreases the average number of computations when appropriately implemented. Finally, the application of the algorithm to coset decoding is considered for |u|u+v| constructed codes. In addition to the conventional coset decoding, a new adaptive practically optimum coset decoding method is presented where at each reprocessing stage, the number of surviving cosets decreases. Suboptimum closest coset decoding is also investigated. It is shown that two-stage decoding with the algorithm of Fossorier and Lin offers a large variety of choices, since the reprocessing order of each stage can be determined independently.
This dissertation presents a novel approach to soft decision decoding for binary linear block codes. The basic idea of this approach is to achieve a desired error performance progressively in a number of stages. For each decoding stage, the error performance is highly bounded and the decoding is terminated at the stage where either near-optimum error performance or a desired level of error performance is achieved. As a result, more flexibility in the trade-off between performance and decoding complexity is provided. The proposed decoding is based on the reordering of the received symbols according to their reliability measure. In the dissertation, we evaluate the statistics of the noise after ordering. Based on these statistics, we derive two monotonic properties which dictate the reprocessing strategy. Each codeword is decoded in two steps: (1) hard-decision decoding based on reliability information and (2) reprocessing of the hard-decision decoded codeword in successive stages until the desired performance is achieved. The reprocessing is based on the monotonic properties of the ordering and is carried out using a cost function. A new resource test highly related to the reprocessing strategy is introduced to reduce the number of computations for each reprocessing stage. For short codes of lengths N ≤ 32 or medium codes with 32 < N ≤ 64 with rate R ≥ 0.6, near-optimum bit error performance is achieved in two stages of reprocessing with at most a computation complexity of o(K2) constructed code-words, where K is the dimension of the code. For longer codes, three or more reprocessing stages are required to achieve near-optimum decoding. However, most of the coding gain is obtained within the first two reprocessing stages for error performances of practical interest. The proposed decoding algorithm applies to any binary linear code, does not require any data storage and is well suitable for parallel processing. Furthermore, the maximum number of computations required at each reprocessing stage is fixed, which prevents buffer overflow at low SNR. Further reductions of the number of computations based on probabilistic or decomposable properties of the code considered are also investigated. The generalization of the algorithm to other channels is discussed. Finally, the discrete time channel associated with the AWGN model after ordering is greatly simplified. This simplification allows an important reduction of the number of computations required to evaluate the theoretical error performance of any algorithm based on a partial or total ordering.
In this correspondence, various aspects of reliability-based syndrome decoding of binary codes are investigated. First, it is shown that the least reliable basis (LRB) and the most reliable basis (MRB) are dual of each other. By exploiting this duality, an algorithm performing maximum-likelihood (ML) soft-decision syndrome decoding based on the LRB is presented. Contrarily to previous LRB-based ML syndrome decoding algorithms, this algorithm is more conveniently implementable for codes whose codimension is not small. New sufficient conditions for optimality are derived. These conditions exploit both the ordering associated with the LRB and the structure of the code considered. With respect to MRR-based sufficient conditions, they present the advantage of requiring no soft information and thus can be preprocessed and stored. Based on these conditions, low-complexity soft-decision syndrome decoding algorithms for particular classes of codes are proposed. Finally, a simple algorithm is analyzed. After the construction of the LRB, this algorithm computes the syndrome of smallest Hamming weight among o(K/sup i/) candidates, where K is the dimension of the code, for an order i of reprocessing. At practical bit-error rates, for codes of length N/spl les/128, this algorithm always outperforms any algebraic decoding algorithm capable of correcting up to t+1 errors with an order of reprocessing of at most 2, where t is the error-correcting capability of the code considered.
In this paper, soft decision decoding of linear block codes based on the reprocessing of several information sets is considered. These information sets are chosen according to the reliability measures of the received symbols and constructed from the most reliable information set. Each information set is then reprocessed by the ordered statistics algorithm. General guidelines for the trade-offs between the number of information sets to be processed, the number of computations for reprocessing each information set, and the error performance to be achieved are provided.
In this correspondence, we consider the decoding of binary block codes over the additive white Gaussian noise (AWGN) channel with binary phase-shift keying (BPSK) signaling. By a reliability-order-based decoding algorithm (ROBDA), we mean a soft-decision decoding algorithm which decodes to the best (most likely) codeword of the form that is the sum of the hard-decision tuple and an error pattern in a set determined only by the order of the reliabilities of the hard decisions. Examples of ROBDAs include many well-known decoding algorithms, such as the generalized-minimum-distance (GMD) decoding algorithm, Chase decoding algorithms, and the reliability-based decoding algorithms proposed by Fossorier and Lin. It is known that the squared error-correction-radii of ROBDAs can be computed from the minimal squared Euclidean distances (MSEDs) between the all-one sequence and the polyhedra corresponding to the error patterns. For the computation of such MSEDs, we give a new method which is more compact than the one proposed by Fossorier and Lin. These results are further used to show that any bounded-distance ROBDA is asymptotically optimal: The ratio between the probability of decoding error of a bounded-distance ROBDA and that of the maximum-likelihood (ML) decoding approaches 1 when the signal-to-noise ratio (SNR) approaches infinity, provided that the minimum Hamming distance of the code is greater than 2.
We introduce a novel universal soft-decision decoding algorithm for binary block codes called ordered reliability direct error pattern testing (ORDEPT). Our results, obtained for a variety of popular short high-rate codes, demonstrate that ORDEPT outperforms state-of-the-art decoding algorithms of comparable complexity such as ordered reliability bits guessing random additive noise decoding (ORBGRAND) in terms of the decoding error probability and latency. The improvements carry on to the iterative decoding of product codes and convolutional product-like codes, where we present a new adaptive decoding algorithm and demonstrate the ability of ORDEPT to efficiently find multiple candidate codewords to produce soft output.