© 2026 Aqora Quantum S.A.S.

Terms Privacy Legal Notice

Optics Express

Fast all-optical flip-flop based on a single distributed feedback laser diode

Koen Huybrechts, Geert I. Morthier, Roel Baets

Published Jul 15, 2008• 85 citations

Abstract

Since there is an increasing demand for fast networks and switches, the electronic data processing imposes a severe bottleneck and all-optical processing techniques will be required in the future. All-optical flip-flops are one of the key components because they can act as temporary memory elements. Several designs have already been demonstrated but they are often relatively slow or complex to fabricate. We demonstrate experimentally fast flip-flop operation in a single DFB laser diode which is one of the standard elements in today's telecommunication industry. Injecting continuous wave light in the laser diode, a bistability is obtained due to the spatial hole burning effect. We can switch between the two states by using pulses with energies below 200 fJ resulting in flip-flop operation with switching times below 75 ps and repetition rates of up to 2 GHz.

DOI: 10.1364/oe.16.011405

Related papers

Experimental demonstration of all-optical flip-flop operation with a single distributed feedback laser diode

Koen Huybrechts, Geert I. Morthier, Roel Baets

Dynamic all-optical flip-flop operation is observed for a single distributed feedback laser diode using the spatial hole burning effect. Bistabilities with extinction ratios of up to 35 dB are obtained. For the flip-flop operation, we demonstrate repetition rates up to 1.25 GHz using pulses of 0.5 pJ.

International Conference on Photonics in Switching•Aug 1, 2008•3 citations

All-optical flip-flop memory based on injection locked Fabry-Perot laser diode

Yong Deok Jeong, Hyuek Jae Lee, Jeong Sik Cho +2 more

We demonstrate all-optical flip-flop operation based on the bistability injection locked FP-LD. The proposed all-optical flip-flop consists of a slave FP-LD and a specially designed single mode FP-LD.

International Conference on Optical Internet•Jul 1, 2006•0 citations

All-optical flip-flop operation based on bistability in V-cavity laser

Yingchen Wu, Yu Zhu, Xiaolu Liao +2 more

We theoretically analyzed and experimentally demonstrated an injection-locking based all-optical flip-flop memory using a simple and compact tunable V-cavity laser (VCL). A bistable region in the tuning characteristics of the VCL is employed for the flip-flop operation. The state of the VCL can be set and reset by injecting signal pulses at two different wavelengths. The pulse power for both set and reset signal is only about 1 pJ. Short response times of about 150 ps are measured for storing and erasing.

Optics Express•May 31, 2016•19 citations

Fast coherent all-optical flip-flop memory

Jani Oksanen, Jukka Tulkki

Coherent nonlinear feedback is shown to eliminate the most critical transient problems in the known active integrated all-optical flip-flop structures, potentially increasing the operating speed by an order of magnitude. The nonlinearity is based on the interference of two coherent optical fields and on operating the pertinent laser amplifiers only above the laser threshold. Therefore the lasers have an approximately constant carrier density and an ever present photon population in the laser mode. This enables fast switching. Numerical analysis based on coupled rate equations demonstrates switching times below 25ps (40GHz).

Applied Physics Letters•May 1, 2006•7 citations

Optical bistability in a SOA/DFB-LD feedback scheme

Wouter D’Oosterlinck, Geert I. Morthier, Roel Baets +1 more

Optical bistability is investigated using a DFB laser diode connected with a SOA. Broadband operation and tunability of the domain of bistable responses is shown. The device can readily serve as an all-optical flip-flop.

Conference on Lasers and Electro-Optics•Jan 1, 2006•1 citation

All-optical flip-flops using injection-locked Fabry-Perot laser diodes

Yu‐Ho Won, J.S. Cho, Yong Deok Jeong +1 more

All-optical flip-flops (AOFFs) using optical bistability of injection-locked Fabry-Perot laser diodes (FP-LDs) are demonstrated. To increase performance of the AOFF, single-mode FP-LDs are introduced. The single-mode FP-LD is used as an auxiliary beam source that sustains the state of AOFF or it is used as a state memory component itself to increase an on-off contrast ratio up to 35 dB.

International Conference on Photonics in Switching•Aug 1, 2007•1 citation

Since there is an increasing demand for fast networks and switches, the electronic data processing imposes a severe bottleneck and all-optical processing techniques will be required in the future. All-optical flip-flops are one of the key components because they can act as temporary memory elements. Several designs have already been demonstrated but they are often relatively slow or complex to fabricate. We demonstrate experimentally fast flip-flop operation in a single DFB laser diode which is one of the standard elements in today's telecommunication industry. Injecting continuous wave light in the laser diode, a bistability is obtained due to the spatial hole burning effect. We can switch between the two states by using pulses with energies below 200 fJ resulting in flip-flop operation with switching times below 75 ps and repetition rates of up to 2 GHz.

We theoretically analyzed and experimentally demonstrated an injection-locking based all-optical flip-flop memory using a simple and compact tunable V-cavity laser (VCL). A bistable region in the tuning characteristics of the VCL is employed for the flip-flop operation. The state of the VCL can be set and reset by injecting signal pulses at two different wavelengths. The pulse power for both set and reset signal is only about 1 pJ. Short response times of about 150 ps are measured for storing and erasing.

Coherent nonlinear feedback is shown to eliminate the most critical transient problems in the known active integrated all-optical flip-flop structures, potentially increasing the operating speed by an order of magnitude. The nonlinearity is based on the interference of two coherent optical fields and on operating the pertinent laser amplifiers only above the laser threshold. Therefore the lasers have an approximately constant carrier density and an ever present photon population in the laser mode. This enables fast switching. Numerical analysis based on coupled rate equations demonstrates switching times below 25ps (40GHz).