IEEE Transactions on Applied Superconductivity

Optical data communication between Josephson-junction circuits and room-temperature electronics

Bart Van Zeghbroeck

Published Mar 1, 1993• 15 citations

Abstract

The feasibility of optical data transmission to and from Josephson junction circuits, using metal-semiconductor-metal (MSM) photodiodes and GaAs/AlGaAs semiconductor laser diodes with sub-mA threshold current, is demonstrated. Standard devices can be used with the exception of a cooled GaAs detector. It is shown that silicon MSM detectors compatible with Josephson junction circuits can be fabricated. While these detectors show large photoconductive effects at room temperature they behave as good-quality photodiodes at low temperatures. Power dissipation in the laser diode scales with temperature while maintaining the modulation frequency. It is also shown that the combination of a laser diode and a photodiode provides the voltage gain needed to interface Josephson-junction circuits with room-temperature electronics. Experimental results on MSM detectors and laser diodes are presented. Expected power dissipation is below 1 mW per input/output (I/O) at a data rate of 1 Gb/s.>

DOI: 10.1109/77.234002

Related papers

Ultrafast, integrable, optics-based interface between superconducting and room-temperature electronics

Chia-Chi Wang, Marc Currie, T.Y. Hsiang

An ultrafast optical interface between superconducting and room-temperature electronics is proposed to take full advantage of high-speed superconducting circuits. We report on the computed and experimental studies of an optical receiving and modulating system that is compatible in processing with the prevailing integrated-superconducting-circuit technology. Planar interdigitated Nb/Si/Nb metal-semiconductor-metal (MSM) photodiodes are demonstrated as optical receivers with resolvable bit-rate as high as 38 Gb/s, and the response of MSM diode was shaped to be a single-flux-quantum pulse to drive Josephson-junction-based circuits. A similar interdigitated structure on a silicon waveguide is proposed to be an ultrafast light-intensity modulator, with its operation based on carrier-density modulation of the optical index of refraction. This field-effect device has insignificant power dissipation, in addition to high speed. A sample modulator with 5-V bias is shown to have a modulation depth of 40% and a bandwidth over 70 GHz.>

IEEE Transactions on Applied SuperconductivityJun 1, 19955 citations

Optical input/output interface system for Josephson junction integrated circuits

K. Nakahara, Hideyuki Nagaishi, Hiroaki HASEGAWA +3 more

An optical input/output interface system for a Josephson junction integrated circuit is fabricated and tested. The system consists of a superconducting optical detector, a dc powered Josephson circuit, a dc powered Josephson high voltage circuit, a liquid-He-cooled semiconductor amplifier, and a liquid-He-cooled semiconductor laser. Features of the system are use of an ultrathin NbN film for the optical detector and adoption of the dc powered Josephson circuits for logic operation circuits. Correct optical output signal is detected by a liquid-He-cooled semiconductor photodiode. The optical input/output interface has the advantage of low heat penetration and low crosstalk compared to the interface using conventional coaxial lines. Moreover, dc powered Josephson circuits have an advantage of low crosstalk from power supply lines compared to conventional Josephson circuits, which are driven by ac supply current.>

IEEE Transactions on Applied SuperconductivityJan 1, 199410 citations

Operation of Josephson Junctions With Current Pulses Generated by Triggering a Cold Photo Detector With an Optical Comb

Chiharu Urano, Nobu‐Hisa Kaneko, Masaaki Maezawa +5 more

We report the experimental results on a Josephson junction array (JJA) driven by current pulse trains generated by triggering a photo detector located in a cryostat with an optical comb. The key components in the experimental system are a mode locked fiber laser, a metal-semiconductor-metal (MSM) photoconductive switch, and an overdamped JJA. Optical pulse trains generated at room temperature are transmitted via an optical fiber to the MSM-photo detector installed at 4.2 K, and then converted into electric current pulse trains to drive the overdamped JJA. Quantized voltage steps have been verified at multiples of 10 muV, which agrees with the repetition rate of the pulse laser and the number of Josephson junctions in the JJA.

IEEE Transactions on Applied SuperconductivityJun 1, 20078 citations

Magneto-optical modulator for the superconducting digital output interface

Roberto Rey-de-Castro

Josephson-junction-based low temperature rapid single flux quantum (RSFQ) superconducting electronics is already a mature technology, which is expected to perform at speeds exceeding 100 GHz [1]. However, the RSFQ technology still lacks a fast enough output interface between its operating circuit temperature T = 4.2 K and the room temperature electronic environment. RSFQ circuits work at liquid helium temperatures and the direct interconnection of these circuits and room temperature circuits using, e.g., copper transmission lines would consume too much of the cooling power [2]. To solve this problem a magneto-optical (MO) output interface has been proposed [3], in which the output current pulse from the RSFQ circuit is converted into an optical pulse and delivered to room temperature readout circuitry via an optical fiber.

Opto-Canada: SPIE Regional Meeting on Optoelectronics, Photonics, and ImagingAug 29, 20171 citation

Laser diodes for optical readout of cryo-electronics

Lewis A. Bunz, Sergey V. Rylov, Elie K. Track

We report successful coupling of electrical signals from low temperature (4.2 K) superconducting circuitry to room temperature electronics using laser diodes coupled to optical fibers. The techniques used rely on laser diodes operating at low temperatures, and on high gain amplifiers placed outside the low temperature environment. A new superconducting driver circuit is used to step-up the low output of these circuits to a seven millivolt level, sufficient to modulate the laser diodes. By properly choosing the laser source, the power dissipated within the cryogenic environment can be maintained below 400 (mu) W, with further improvements easily reached.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIEJun 23, 19944 citations

An ultrahigh-impedance superconducting thermal switch for interfacing superconductors to semiconductors and optoelectronics

Adam N. McCaughan, Varun Boehm Verma, Sonia Mary Buckley +5 more

A number of current approaches to quantum and neuromorphic computing use superconductors as the basis of their platform or as a measurement component, and will need to operate at cryogenic temperatures. Semiconductor systems are typically proposed as a top-level control in these architectures, with low-temperature passive components and intermediary superconducting electronics acting as the direct interface to the lowest-temperature stages. The architectures, therefore, require a low-power superconductor-semiconductor interface, which is not currently available. Here we report a superconducting switch that is capable of translating low-voltage superconducting inputs directly into semiconductor-compatible (above 1,000 mV) outputs at kelvin-scale temperatures (1 K or 4 K). To illustrate the capabilities in interfacing superconductors and semiconductors, we use it to drive a light-emitting diode (LED) in a photonic integrated circuit, generating photons at 1 K from a low-voltage input and detecting them with an on-chip superconducting single-photon detector. We also characterize our device's timing response (less than 300 ps turn-on, 15 ns turn-off), output impedance (greater than 1 MΩ), and energy requirements (0.18 fJ/um^2, 3.24 mV/nW).

arXiv:1903.10461Mar 25, 20191 citation