Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Journal of the Optical Society of America B

High-stability transfer of an optical frequency over long fiber-optic links

Paul A. Williams, William C. Swann, Nathan R. Newbury

Published Jul 16, 2008• 386 citations
Publisher

Abstract

We present theoretical predictions and experimental measurements for the achievable phase noise, timing jitter, and frequency stability in the coherent transport of an optical frequency over a fiber-optic link. Both technical and fundamental limitations to the coherent transfer are discussed. Measurements of the coherent transfer of an optical carrier over links ranging from 38 to 251 km demonstrate good agreement with theory. With appropriate experimental design and bidirectional transfer on a single optical fiber, the frequency instability at short times can reach the fundamental limit imposed by delay-unsuppressed phase noise from the fiber link, yielding a frequency instability that scales as link length to the 3/2 power. For two-way transfer on separate outgoing and return fibers, the instability is severely limited by differential fiber noise.

DOI
10.1364/josab.25.001284

Related papers

Coherent transfer of an optical carrier over 251 km

Nathan R. Newbury, Paul A. Williams, William C. Swann

We transfer an optical frequency over 251 km of optical fiber with a residual instability of 6x10(-19) at 100 s. This instability and the associated timing jitter are limited fundamentally by the noise on the optical fiber and the link length. We give a simple expression for calculating the achievable instability and jitter over a fiber link. Transfer of optical stability over this long distance requires a highly coherent optical source, provided here by a cw fiber laser locked to a high finesse optical cavity. A sufficient optical carrier signal is delivered to the remote fiber end by incorporating two-way, in-line erbium-doped fiber amplifiers to balance the 62 dB link loss.

Optics Letters•Oct 15, 2007•228 citations

Study on a Precise Frequency Comparison System using an Optical Carrier

Masato Wada, Ken-ichi Watabe, Sho Okubo +3 more

We have investigated the performance of an optical carrier transfer system for a remote comparison of optical clocks. In the frequency transfer system, technical problems and fundamental principles limit the coherent transfer on a long-haul optical fiber. They contribute to noise processes that come from the propagation delay in the fiber, the design of an interferometer, burst length fluctuations of the fiber, asymmetrical propagation characteristics, and so on. The feasibility of a full optical link with high stability is discussed. The phase detection with a high degree of precision and cancellation of the fiber-induced noise on the round-trip light are achieved with a well-known standard technique using an all-fiber-based interferometer. We report the characteristics of these noise processes with results on a spooled fiber. An Allan deviation of the compensated link which is extended to 90 km reaches 5 × 10-18 close to the theoretical limit imposed by the delay-unsuppressed fiber noise at averaging time of 103s.

IEEJ Transactions on Electronics Information and Systems•Jan 1, 2014•0 citations

Long distance optical frequency transfer over fiber: Predicting the frequency stability from the fiber noise

Nathan R. Newbury, Paul A. Williams, William C. Swann

We have recently demonstrated the coherent transfer of an optical signal over a 251 km link of optical fiber by use of the standard Doppler-cancellation approach to remove the effects of the fiber-link noise. The fundamental limit to the frequency instability on the transmitted optical frequency is set by residual phase noise on the optical frequency resulting from the unavoidably imperfect Doppler cancellation of the fiber-link noise. Here we demonstrate that it is possible to quantitatively predict the phase noise and instability of the Doppler-cancelled transmitted optical frequency directly from the measured fiber-link noise. The ability to predict the frequency instability from the measured fiber noise can be a useful tool in evaluating whether a coherent fiber optic link is operating at its fundamental limit, or whether there is additional excess noise from the measurement system present in the link.

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)•May 1, 2008•4 citations

A Precise Frequency Comparison System Using an Optical Carrier

Masato Wada, Ken-ichi Watabe, Sho Okubo +3 more

SUMMARY We have investigated the performance of an optical carrier transfer system for remote comparison of optical clocks. In the frequency transfer system, technical problems and fundamental principles limit coherent transfer on a long‐haul optical fiber. They contribute to noise processes that come from the propagation delay in the fiber, the design of the interferometer, burst length fluctuations of the fiber, asymmetrical propagation characteristics, and so on. The feasibility of a full optical link with high stability is discussed. Phase detection with a high degree of precision and cancelation of the fiber‐induced noise on the round‐trip light are achieved with a well‐known standard technique using an all‐fiber‐based interferometer. We report the characteristics of these noise processes with results on a spooled fiber. The Allan deviation of the compensated link which is extended to 90 km reaches 5 × 10 −18 , close to the theoretical limit imposed by the delay‐unsuppressed fiber noise at an averaging time of 103 s.

Electronics and Communications in Japan•Oct 16, 2015•3 citations

Coherent Optical Frequency Transfer over 100 km Fiber Link Using Bidirectional Active Optics

Hanxu Wu, Xiaoming Zhang, Weinan Zhao +7 more

SummaryPrecise and stable coherent optical frequency transfer over long-haul fiber link is required by diverse scientific applications, such as large-scale optical clock networks, global positioning and timing, very-long baseline interferometry, and high-sensitivity tests of fundamental physics. To meet the needs of the above applications, active compensation schemes for cancelling fiber-induced phase noise has developed considerably over the past ten years. However, optical signal severely reduces across distant fiber-optic networks, which degrades optical beat signal and feedback control.Here, we adopt active phase compensation and bidirectional optical frequency locking to achieve ultra-stable optical carrier transfer. The phase noise of the fiber link is effectively suppressed, meanwhile, the ultra-stable optical frequency signal is regenerated accurately at the remote site.Preliminary experiment over 100 km fiber link indicates that the additional frequency stability exhibits 1.9×10-16and 2.5×10-17at an averaging time of 1 s and 100 s, respectively. This approach has a capacity of extending to the parallel transfer of microwave and optical frequency, and free-space optical frequency transfer.

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)•May 15, 2023•0 citations

Coherent Optical Phase Transfer over a 32-km Fiber with 1 s Instability at 10−17

Seth M. Foreman, Andrew D. Ludlow, Marcio H. G. de Miranda +3 more

The phase coherence of an ultrastable optical frequency reference is fully maintained over actively stabilized fiber networks of lengths exceeding 30 km. For a 7-km link installed in an urban environment, the transfer instability is 6 x 10{-18} at 1 s. The excess phase noise of 0.15 rad, integrated from 8 mHz to 25 MHz, yields a total timing jitter of 0.085 fs. A 32-km link achieves similar performance. Using frequency combs at each end of the coherent-transfer fiber link, a heterodyne beat between two independent ultrastable lasers, separated by 3.5 km and 163 THz, achieves a 1-Hz linewidth.

arXiv:0707.0096•Physical Review Letters•Oct 9, 2007•141 citations
We present theoretical predictions and experimental measurements for the achievable phase noise, timing jitter, and frequency stability in the coherent transport of an optical frequency over a fiber-optic link. Both technical and fundamental limitations to the coherent transfer are discussed. Measurements of the coherent transfer of an optical carrier over links ranging from 38 to 251 km demonstrate good agreement with theory. With appropriate experimental design and bidirectional transfer on a single optical fiber, the frequency instability at short times can reach the fundamental limit imposed by delay-unsuppressed phase noise from the fiber link, yielding a frequency instability that scales as link length to the 3/2 power. For two-way transfer on separate outgoing and return fibers, the instability is severely limited by differential fiber noise.
We transfer an optical frequency over 251 km of optical fiber with a residual instability of 6x10(-19) at 100 s. This instability and the associated timing jitter are limited fundamentally by the noise on the optical fiber and the link length. We give a simple expression for calculating the achievable instability and jitter over a fiber link. Transfer of optical stability over this long distance requires a highly coherent optical source, provided here by a cw fiber laser locked to a high finesse optical cavity. A sufficient optical carrier signal is delivered to the remote fiber end by incorporating two-way, in-line erbium-doped fiber amplifiers to balance the 62 dB link loss.
We have investigated the performance of an optical carrier transfer system for a remote comparison of optical clocks. In the frequency transfer system, technical problems and fundamental principles limit the coherent transfer on a long-haul optical fiber. They contribute to noise processes that come from the propagation delay in the fiber, the design of an interferometer, burst length fluctuations of the fiber, asymmetrical propagation characteristics, and so on. The feasibility of a full optical link with high stability is discussed. The phase detection with a high degree of precision and cancellation of the fiber-induced noise on the round-trip light are achieved with a well-known standard technique using an all-fiber-based interferometer. We report the characteristics of these noise processes with results on a spooled fiber. An Allan deviation of the compensated link which is extended to 90 km reaches 5 × 10-18 close to the theoretical limit imposed by the delay-unsuppressed fiber noise at averaging time of 103s.
We have recently demonstrated the coherent transfer of an optical signal over a 251 km link of optical fiber by use of the standard Doppler-cancellation approach to remove the effects of the fiber-link noise. The fundamental limit to the frequency instability on the transmitted optical frequency is set by residual phase noise on the optical frequency resulting from the unavoidably imperfect Doppler cancellation of the fiber-link noise. Here we demonstrate that it is possible to quantitatively predict the phase noise and instability of the Doppler-cancelled transmitted optical frequency directly from the measured fiber-link noise. The ability to predict the frequency instability from the measured fiber noise can be a useful tool in evaluating whether a coherent fiber optic link is operating at its fundamental limit, or whether there is additional excess noise from the measurement system present in the link.
SUMMARY We have investigated the performance of an optical carrier transfer system for remote comparison of optical clocks. In the frequency transfer system, technical problems and fundamental principles limit coherent transfer on a long‐haul optical fiber. They contribute to noise processes that come from the propagation delay in the fiber, the design of the interferometer, burst length fluctuations of the fiber, asymmetrical propagation characteristics, and so on. The feasibility of a full optical link with high stability is discussed. Phase detection with a high degree of precision and cancelation of the fiber‐induced noise on the round‐trip light are achieved with a well‐known standard technique using an all‐fiber‐based interferometer. We report the characteristics of these noise processes with results on a spooled fiber. The Allan deviation of the compensated link which is extended to 90 km reaches 5 × 10 −18 , close to the theoretical limit imposed by the delay‐unsuppressed fiber noise at an averaging time of 103 s.
SummaryPrecise and stable coherent optical frequency transfer over long-haul fiber link is required by diverse scientific applications, such as large-scale optical clock networks, global positioning and timing, very-long baseline interferometry, and high-sensitivity tests of fundamental physics. To meet the needs of the above applications, active compensation schemes for cancelling fiber-induced phase noise has developed considerably over the past ten years. However, optical signal severely reduces across distant fiber-optic networks, which degrades optical beat signal and feedback control.Here, we adopt active phase compensation and bidirectional optical frequency locking to achieve ultra-stable optical carrier transfer. The phase noise of the fiber link is effectively suppressed, meanwhile, the ultra-stable optical frequency signal is regenerated accurately at the remote site.Preliminary experiment over 100 km fiber link indicates that the additional frequency stability exhibits 1.9×10-16and 2.5×10-17at an averaging time of 1 s and 100 s, respectively. This approach has a capacity of extending to the parallel transfer of microwave and optical frequency, and free-space optical frequency transfer.
The phase coherence of an ultrastable optical frequency reference is fully maintained over actively stabilized fiber networks of lengths exceeding 30 km. For a 7-km link installed in an urban environment, the transfer instability is 6 x 10{-18} at 1 s. The excess phase noise of 0.15 rad, integrated from 8 mHz to 25 MHz, yields a total timing jitter of 0.085 fs. A 32-km link achieves similar performance. Using frequency combs at each end of the coherent-transfer fiber link, a heterodyne beat between two independent ultrastable lasers, separated by 3.5 km and 163 THz, achieves a 1-Hz linewidth.