It is shown that thermal energy from a heat source can be converted to useful work in the form of maser-laser light by using a combination of a Stern-Gerlach device and stimulated emissions of excited particles in a maser-laser cavity. We analyze the populations of atoms or quantum dots exiting the cavity, the photon statistics, and the internal entropy as a function of atomic transit time, using the quantum theory of masers and lasers. The power of the laser light is estimated to be sufficiently high for device applications. The thermodynamics of the heat converter is analyzed as a heat engine operating between two reservoirs of different temperature but is generalized to include the change of internal quantum states. The von Neumann entropies for the internal degree are obtained. The sum of the internal and external entropies increases after each cycle and the second law is not violated, even if the photon entropy due to finite photon number distribution is not included. An expression for efficiency relating to the Carnot efficiency is obtained. We resolve the subtle paradox on the reduction of the internal entropy with regards to the path separation after the Stern-Gerlach device.
It is shown that thermal energy from a heat source can be converted to useful work in the form of maser-laser light by using a combination of a Stern-Gerlach device and stimulated emissions of excited particles in a maser-laser cavity. We analyze the populations of atoms or quantum dots exiting the cavity, the photon statistics, and the internal entropy as a function of atomic transit time, using the quantum theory of masers and lasers. The power of the laser light is estimated to be sufficiently high for device applications. The thermodynamics of the heat converter is analyzed as a heat engine operating between two reservoirs of different temperature but is generalized to include the change of internal quantum states. The von Neumann entropies for the internal degree are obtained. The sum of the internal and external entropies increases after each cycle and the second law is not violated, even if the photon entropy due to finite photon number distribution is not included. An expression for efficiency relating to the Carnot efficiency is obtained. We resolve the subtle paradox on the reduction of the internal entropy with regards to the path separation after the Stern-Gerlach device.
The single-atom version of the quantum heat engine based on electromagnetically induced transparency is theoretically investigated in this paper. In contact with a hot and a cold bath, the atom trapped in an optical cavity is coherently coupled by a coherent field, thus generating photons as output through a process that mimics a heat engine. Using semiclassical theory, we obtain the conditions for the classical gain parameter being positive. Then by taking a full quantum approach, we discuss the statistical property of the generated photons depicted by the photon number distribution and Wigner function, and show that it can be effectively tuned by the coupling field. Investigations on the energy and entropy balances of the heat engine process lead to an interesting result that the power of the engine is simply the energy per time provided by the hot reservoir. The coupling field plays a critical role in supporting the heat-engine process. However, the energy that it provides is all dumped into the cold reservoir. The total energy exchange conforms to the first law of thermodynamics. The efficiency of the engine depends on the temperatures of the two reservoirs and the strength of the coupling field. The entropy change of the heat-engine process suggests that when working far above the threshold of lasing, the efficiency approaches that of its atomic-ensemble-based partner.
The Carnot limit, formulated in 1824, represents the maximal efficiency of a classical heat engine. In this work we present a thermodynamical analysis of a light amplifier based on a three-level atom coupled off-resonantly to a single quantized cavity mode and to two heat reservoirs with positive temperatures. Based on standard work and heat flow equilibrium, we show that for a cavity blue-detuned with respect to the atomic resonance, the system can surpass the Carnot limit. Nevertheless, the second law of thermodynamics is still obeyed, as the total entropy always increases. By analyzing a semiclassical version of the model, we derive a formula for the critical frequency for which the Carnot limit is broken and a formula for the amplifier efficiency which agrees with its quantum counterpart. In the semiclassical regime, however, the second law is not satisfied and hence it does not offer a physically acceptable description of the system. Finally, we show that breaking the Carnot limit occurs also in a blue-detuned quantum amplifier with output coupling, which represents a realistic model of a laser or maser.
Thermodynamics of a three-level maser was studied in the pioneering work of Scovil and Schulz-DuBois [Phys. Rev. Lett. 2, 262 (1959)]. In this work we consider the same three-level model, but treat both the matter and the light quantum mechanically. Specifically, we analyze an extended (three-level) dissipative (ED) Jaynes-Cummings model (JCM) within the framework of a quantum heat engine, using formulas for heat flux and power in bipartite systems introduced in our previous work [E. Boukobza and D. J. Tannor Phys. Rev. A 74, 063823 (2006)] Amplification of the selected cavity mode occurs even in this simple model, as seen by a positive steady state power. However, initial field coherence is lost, as seen by the decaying off-diagonal field density matrix elements, and by the Husimi-Kano Q function. We show that after an initial transient time the field's entropy rises linearly during the operation of the engine, which we attribute to the dissipative nature of the evolution and not to matter-field entanglement. We show that the second law of thermodynamics is satisfied in two formulations (Clausius, Carnot) and that the efficiency of the ED JCM heat engine agrees with that defined intuitively by Scovil and Schulz-DuBois. Finally, we compare the steady state heat flux and power of the fully quantum model with the semiclassical counterpart of the ED JCM, and derive the engine efficiency formula of Scovil and Schulz-DuBois analytically from fundamental thermodynamic fluxes.
We introduce both a theoretical and an experimental scheme for simulating a quantum thermal engine through an all-optical approach, with the behavior of the working substance and the thermal reservoirs implemented via internal degrees of freedom of a single photon. By using the polarization and propagation path, we encode two quantum bits and then implement the thermodynamical steps of an Otto cycle. To illustrate the feasibility of our proposal, we experimentally realize such simulation through an intense laser beam, evaluating heat and work at each individual step of the thermodynamical cycle. In addition, from the analysis of the entropy production during the entire cycle, we can study the amount of quantum friction produced in the Otto cycle as a function of the difference of temperature between hot and cold reservoirs. Our paper constitutes, therefore, an all-optical-based thermal machine simulation and opens perspectives for other optical simulations in quantum thermodynamics.
The quantum heat engines have drawn much attention due to miniaturization of devices recently. We study the dynamics of the quantum Otto heat engine using the driven-dissipative Schrödinger equation. Starting from different initial states, we simulate the time evolutions of the internal energy, power and heat-work conversion efficiency. The initial state impacts on these thermodynamic quantities before the Otto cycle reaches stable. In the transition period, the efficiency and power may be higher or lower than the corresponding values in the cyclostationary state. Remarkably, the efficiency could surpass the Otto limit and even the Carnot limit and the power could be much higher than the rated power. The efficiency anomaly is due to the energy in the initial state. Thus, we suggest that periodically pumping could take the similar role of a hot bath but could be manipulated flexibly. Furthermore, we propose a new quantum engine working in a single reservoir to convert the pump energy into mechanical work. This manipulative engine could potentially be applied to working in the microenvironments without a large temperature difference, such as the biological tissues in vivo. Our protocol is expected to model a new quantum engine with the advantage of applicability and controllability.
Conventional heat engines convert thermal energy into mechanical work by using a working medium such as steam or gas that operates between a hot and a cold reservoir. The medium absorbs heat from the hot reservoir, produces work, then releases some heat to the cold reservoir and returns to the initial state. With the advancement of quantum technologies, researchers strive to understand whether quantum media, such as atoms, spins, superconducting circuits and semiconductor quantum dots, can be used in quantum counterparts of the classical heat engines. After a recap of the basics of classical heat engines, this review explores the theoretical foundations and advancements of quantum heat engines, focusing on the proposed two- and multilevel systems used as the working medium for the quantum Otto cycle, which is the ideal thermodynamic cycle that describes the operation of a spark-ignition internal combustion engine. The review compares the efficiency and the work extraction of these systems, discussing their performance in the high- and low-temperature limits. Alternative cycles and engines are also presented to establish the adaptability of the working media when operating under different processes and non-equilibrium conditions. In conclusion, the review offers possible applications and future developments of quantum heat engines.