Abstract : It is well known that ultracold atoms (T < 1 milliKelvin) are promising candidates for nextgeneration inertial sensors and magnetometers. An interferometer measures accelerations and rotations in much the same way as does a laser-based interferometer, except that the recorded interferograms are due to matter wave interference rather than optical interference. Large laboratory-based atom interferometers using thermal atom beams have demonstrated unparalleled performance, but the most promising path to making such technology practical is to use ultracold atoms: unlike room temperature atoms, cold atoms can be guided along controlled trajectories, analogous to fiber optics for light. The roles of matter and light are reversed - whereas material guides photons in fiber optics, photons guide atoms in atom optics. To realize high sensitivities with cold atoms, we must: (1) obtain a large flux of cold atoms and (2) guide atoms coherently in atom waveguides. Our group is working on these issues using optical techniques with cold atoms derived from a magneto-optical trap that contains roughly 108 rubidium atoms at a temperature of 10 muK and density of 10(11) atoms/cm(3).
Abstract : It is well known that ultracold atoms (T < 1 milliKelvin) are promising candidates for nextgeneration inertial sensors and magnetometers. An interferometer measures accelerations and rotations in much the same way as does a laser-based interferometer, except that the recorded interferograms are due to matter wave interference rather than optical interference. Large laboratory-based atom interferometers using thermal atom beams have demonstrated unparalleled performance, but the most promising path to making such technology practical is to use ultracold atoms: unlike room temperature atoms, cold atoms can be guided along controlled trajectories, analogous to fiber optics for light. The roles of matter and light are reversed - whereas material guides photons in fiber optics, photons guide atoms in atom optics. To realize high sensitivities with cold atoms, we must: (1) obtain a large flux of cold atoms and (2) guide atoms coherently in atom waveguides. Our group is working on these issues using optical techniques with cold atoms derived from a magneto-optical trap that contains roughly 108 rubidium atoms at a temperature of 10 muK and density of 10(11) atoms/cm(3).
Abstract : Gyroscopes based on ultracold atom interferometry have the potential to exhibit an intrinsic sensitivity larger by a factor of 4 x 1010 than for light-based interferometers. One of the major technical challenges for the advancement of atom optics and development of practical guided matter wave interferometers is the realization of coherent beam splitters. The overall focus of our research program is to develop a physical understanding of the conditions needed for coherent beam splitting and transport and use this knowledge to implement atom chip based interferometers using clouds of ultracold atoms. In this report we describe our experimental apparatus in detail and discuss the current progress towards interferometric measurements with clouds of ultracold atoms in a chip-based magnetic waveguide.
For the last decade it has been possible to cool atoms to microkelvin temperatures (~1 cm s -1 ) using a variety of optical techniques. Light beams provide the very strong frictional forces required to slow atoms from room temperature (~500 m s -1 ). However, once the atoms are cold, the relatively weak conservative forces of static electric and magnetic fields play an important role. In our group we have been studying the interaction of cold rubidium atoms with periodically magnetized data storage media. Here we review the underlying principles of the forces acting on atoms above a suitably magnetized substrate or near current-carrying wires. We also summarize the status of experiments. These structures can be used as smooth or corrugated reflectors for controlling the trajectories of cold atoms. Alternatively, they may be used to confine atoms to a plane, a line, or a dot and in some cases to reach the quantum limit of confinement. Atoms levitated above a magnetized surface can be guided electrostatically by wires deposited on the surface. The flow and interaction of atoms in such a structure may form the basis of a new technology, `integrated atom optics' which might ultimately be capable of realizing a quantum computer.
Atom optics has been a highly active field of research with many scientific breakthroughs over the past two decades, largely due to successful advances in laser technology, microfabrication techniques, and the development of laser cooling and trapping of neutral atoms. This dissertation details several atom optics experiments with the motivation to develop tools and techniques for precision atom wave interferometry. It provides background information about atom optics and the fundamentals behind laser cooling and trapping, including basic techniques for cold gas thermometry and absorptive detection of atoms. A brief overview of magnetic trapping and guiding in tight wire-based traps is also provided before the experimental details are presented. ❧ We developed a novel laser source of 780 nm light using frequency-doubled 1560 nm fiber amplifier. This laser system provided up to a Watt of tunable frequency stabilized light for two Rb laser cooling and trapping experiments. One system generates Bose-Einstein condensates in an optical trap while the second is based on atom chip magnetic traps. The atom chip system, detailed in this thesis, was designed and built to develop the tools necessary for transport and loading large numbers of cold atoms and explore the potential for guided atom interferometry. Techniques and results from this experiment are presented, including an efficient magnetic transport and loading method to deliver cold atom to atom chip traps. We also developed a modeling tool for the magnetic fields formed by coiled wire geometries, as well as planar wire patterns. These models helped us design traps and determine adiabatic transportation of cold atoms between macro-scale traps and micro-traps formed on atom chips. Having achieved near unity transfer efficiency, we demonstrated that this approach promises to be a consistent method for loading large numbers of atoms into micro-traps. Furthermore, we discuss an in situ imaging technique to investigate magnetic field contours of the traps and the dynamics of atoms within those confining potentials. We also controlled the propagation along the atom chip guides by accelerating atoms with longitudinal magnetic gradients, and investigated an atom focusing scheme. ❧ While the atom chip wire guides perform a role analogous to optical fibers guiding light waves, ""free space"" cold atoms offer great opportunity for precision interferometry. We describe a second on-going atom optics experiment that measures gravity gradients using a pair of atom fountain interferometers separated by one meter. We have demonstrated Gravity Gradiometer resolution down to 4x10⁻⁹ g/m using a 40 kg test mass. The atomic physics subsystem is described in detail, including the vacuum, cold atom source, optics, magnetic coils and shields, and vibration isolation and compensation. The system is designed to be a compact, robust, transportable instrument, taking strides towards future gravity gradient measurements in the field. In the realm of space applications, there has been interest for micro-gravity science experiments aboard the International Space Station, along with instrument development for gravity mapping of Earth and planetary bodies with satellite-based instruments. Furthermore, there are ground-based applications for gravity imaging of local density distributions, precision measurement of gravity, as well as proposals for redefining the kilogram, detecting gravitational waves and determining the Gravitational constant.
Recent progresses on quantum control of cold atoms and trapped ions in both the scientific and technological aspects greatly advance the applications in precision measurement. Thanks to the exceptional controllability and versatility of these massive quantum systems, unprecedented sensitivity has been achieved in clocks, magnetometers, and interferometers based on cold atoms and ions. Besides, these systems also feature many characteristics that can be employed to facilitate the applications in different scenarios. In this review, we briefly introduce the principles of optical clocks, cold atom magnetometers, and atom interferometers used for precision measurement of time, magnetic field, and inertial forces. The main content is then devoted to summarize some recent experimental and theoretical progresses in these three applications, with special attention being paid to the new designs and possibilities towards better performance. The purpose of this review is by no means to give a complete overview of all important works in this fast developing field, but to draw a rough sketch about the frontiers and show the fascinating future lying ahead.
Ultracold samples of laser-cooled atoms are quantum systems over which modern atomic physicists can exert exquisite control. Largely decoupled from their environment, they can act as near-ideal test masses for inertial sensors based on atom interferometry and are well suited to experiments in coherent control of quantum systems that probe the fundamental nature of quantum mechanics and pave the way for practical quantum simulation and computation. This thesis details a series of experimental results that arise from the coherent control of rubidium atoms with laser light, focusing on the interplay between these interactions and atomic velocities; the laser frequency an atom ‘sees’ is Doppler shifted according to its velocity, while conservation of momentum dictates that, in exchanging photons with a laser, an atom’s velocity is altered. Coherent light–atom interactions can thus be tailored either to measure or to narrow the spread of velocities in an ultracold atomic gas. Alternatively, it can be desirable to design interactions that are homogeneous across a large spread of atomic velocities. All of these aspects are explored in this thesis. The velocity-sensitive interactions that lie at the heart of atom-interferometric inertial sensors are reexamined in a manner that yields considerable insight into the underlying processes and culminates in a novel, precise and elegant technique for measuring the velocity of ultracold atoms that is used to reveal the Gaussian nature of the velocity spread in a cloud with an effective temperature of 18.7(6) µK, undistorted by artefacts that plague other methods. Furthermore, optimal control techniques are applied to the problem of coherently and uniformly manipulating the quantum states of atoms in an ensemble with a large spread of velocities, even subject to variations in laser intensity. A broadband inversion pulse is demonstrated to change the internal state of 99.8(3) % of atoms in a ∼35 µK ensemble and — for the first time — this technique is used to optimise an entire atom interferometry sequence, yielding a threefold enhancement in the measurement contrast. Finally, a version of grey molasses cooling — in which atoms accumulate in velocity-dependent ‘dark’ states, narrowing their momentum spread and increasing their phase space density — is demonstrated with phase-coherent cooling beams; dark states that exist in this system prove to be particularly resilient to the spatially varying light shifts that are present in an optical dipole trap, and this is used both to enhance the number of atoms loaded into such a trap — by a factor of 7 compared to loading from a conventional optical molasses — and to further cool them once they are loaded in a technique that has promising prospects for the rapid production of ultracold, trapped, atoms.
Atom interferometry has hugely benefitted from advances made in cold atom physics over the past twenty years, and ultra-precise quantum sensors are now available for a wide range of applications [1]. In particular, cold atom interferometers have shown excellent performances in the field of acceleration and rotation measurements [2,3], and are foreseen as promising candidates for navigation, geophysics, geo-prospecting and tests of fundamental physics such as the Universality of Free Fall (UFF). In order to carry out a test of the UFF with atoms as test masses, one needs to compare precisely the accelerations of two atoms with different masses as they fall in the Earth’s gravitational field. The sensitivity of atom interferometers scales like the square of the time during which the atoms are in free fall, and on ground this interrogation time is limited by the size of the experimental setup to a fraction of a second. Sending an atom interferometer in space would allow for several seconds of excellent free-fall conditions, and tests of the UFF could be carried out with precisions as low as 10-15 [4]. However, cold atoms experiments rely on complex laser systems, which are needed to cool down and manipulate the atoms, and these systems are usually very sensitive to temperature fluctuations and vibrations. In addition, when operating an inertial sensor, vibrations are a major issue, as they deteriorate the performances of the instrument. This is why cold atom interferometers are usually used in ground based facilities, which provide stable enough environments. In order to carry out airborne or space-borne measurements, one has to design an instrument which is both compact and stable, and such that vibrations induced by the platform will not deteriorate the sensitivity of the sensor. We report on the operation of an atom interferometer on board a plane carrying out parabolic flights (Airbus A300 Zero-G, operated by Novespace). We have constructed a compact and stable laser setup, which is well suited for onboard applications. Our goal is to implement a dual-species Rb-K atom interferometer in order to carry out a test of the UFF in the plane. In this perspective, we are designing a dual-wavelength laser source, which will enable us to cool down and coherently manipulate the quantum states of both atoms. We have successfully tested a preliminary version of the source and obtained a double species magneto-optical trap (MOT).