Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Journal of the Optical Society of America

Theory of a self-pumped phase conjugator with two coupled interaction regions

Kenneth R. MacDonald, Jack Feinberg

Published May 1, 1983• 165 citations
Publisher

Abstract

We present a plane-wave analysis of a recently demonstrated self-pumped phase conjugator. This device uses four-wave mixing to produce the phase-conjugate replica of an incident optical wave. All the waves are derived from the single incident wave: there are no externally supplied pumping beams. We consider the case of four-wave mixing in two interaction regions coupled by simple reflection. We calculate the phase-conjugate reflectivity as a function of coupling strength, taking into account imperfect coupling between the two interaction regions, and show that there is a threshold coupling strength below which the reflectivity is zero and above which the reflectivity is multiple valued. We also compute the coupling strength per unit length for a photorefractive crystal of barium titanate.

DOI
10.1364/josa.73.000548

Related papers

Properties of phase‐conjugate reflectivity of self‐pumped four‐wave mixing

Masayoshi Dohata, Atsushi Okamoto, Koji Enbutsu +1 more

Abstract The properties of the phase‐conjugate reflectivity are analyzed anew for the self‐pumped four‐wave mixing in which only the two waves, i.e., the forward pump wave and the probe wave, are incident on the photo‐refractive crystal and the phase‐conjugate wave of the forward pump wave is used as the backward pump wave. First, by means of a model in which a Cat‐type phase conjugator is placed outside the interaction region, the equation for the phase‐conjugate reflectivity of self‐pumped four‐wave mixing using a transmission grating is derived. Next, the numerical calculations have been used for the first time to determine the effects of the coupling strength, the probe ratio as the incident intensity ratio of the forward pump wave to the probe wave, and the reflectivity of the Cat‐type phase conjugator on the entire phase conjugate reflectivity. Since the equation describing the phase‐conjugate reflectivity has multiple solutions, the strict analysis of the equation shows that the phase‐conjugate reflectivity has multiple values. Further, the conditions for high phase‐conjugate reflectivity has been studied.

Electronics and Communications in Japan (Part II Electronics)•Jan 1, 1996•0 citations

Passive phase conjugate mirror based on self-induced oscillation in an optical ring cavity

Mark Cronin‐Golomb, Baruch Fischer, Jeffrey Owen White +1 more

A passive phase conjugate mirror based on four-wave mixing in an optical ring cavity is described. Unlike previously demonstrated passive phase conjugate mirrors it generates only one of its pumping beams by nonlinear optical interactions, the other being provided by feedback of the probe after transmission through the nonlinear medium. The results of a theory yielding phase conjugate reflectivity and oscillation thresholds are presented together with an experimental demonstration of phase conjugation in barium titanate and strontium barium niobate. The device is self-starting by four-wave mixing, and has an oscillation threshold lower than that of other previously demonstrated passive phase conjugate mirrors with similar ease of alignment. The operation of a device which generates nonconjugate oscillation beams is also reported.

Applied Physics Letters•Jun 1, 1983•111 citations

Controlling the frequency shift of a self-pumped phase conjugator

J. P. Jiang, Jack Feinberg

When the phase-conjugate replica of an optical beam is generated by traditional four-wave mixing with external pumping beams, the frequency of the phase-conjugate beam is fixed by the frequencies of the three input beams. In self-pumped phase conjugation, there is only one input beam, and the frequency of the output beam is free to roam. In photorefractive materials, this frequency difference between the incident and output beams is typically a few hertz. We present a method for controlling this frequency shift in the self-pumped phase-conjugate mirror that uses a ring configuration1 in photorefractive barium titanate. We show that two-beam coupling of an additional control beam with either of the optical beams already present in the ring cavity can alter the frequency of the phase-conjugate beam. We show that the control beam can alter the nonreciprocal phase shift2 of light propagating around the ring and thereby alter the frequency of the phase-conjugate beam. We also calculate the magnitude and the sign of the expected frequency shift as a function of the intensity, direction, and frequency of this control beam.

Annual Meeting Optical Society of America•Jan 1, 1986•0 citations

Photorefractive phase conjugators

M. D. Ewbank

The demonstration of optical phase conjugation in photorefractive materials has been accomplished by numerous methods, including i) externally-pumped four-wave mixing,1ii) self-pumped (passive) phase conjugation,24iii) stimulated backscattering,5,6and iv) mutually-pumped phase conjugation.7-10Stimulated backscattering and self-pumped phase conjugators have only a single incident beam. On the other hand, externally-pumped four-wave mixing has two auxiliary pumping beams in addition to the incident probe beam. Different still is the cross-conjugation of the two incident beams in mutually pumped phase conjugators. To use these conjugators in a given application, the compatibility between the processes generating the phase-conjugate wave(s) and the application must be considered. The distinguishing features of the different conjugators translate to advantages or disadvantages for certain applications.

Digest on Nonlinear Optics: Materials, Phenomena and Devices•Jan 1, 1990•1 citation

Theoretical study on effects of stimulated photorefractive backscattering in self-pumped phase conjugators

Shuo‐Xing Dou, Jiasen Zhang, Muyang Wang +2 more

Effects of stimulated photorefractive backscattering (SPB) interactions in both stimulated photorefractive backscattering and four-wave mixing (SPB-FWM) and total internal reflection (TIR) self-pumped phase conjugators have been analyzed theoretically. SPB interactions in the four-wave mixing regions are neglected. Calculations show that the operational threshold and the phase conjugation reflectivity of both phase conjugators are very sensitive to the backscattering two-wave mixing gain coefficient of the crystals. From these results the mechanism transition phenomenon of a self-pumped phase conjugator between SPB-FWM and TIR can be explained if the backscattering gain coefficient of the crystal varies with doping concentration or with wavelength.

Journal of the Optical Society of America B•Jun 1, 1995•9 citations

Optical Bistability in a Photorefractive Self-Pumped Phase-Conjugator

Jiasen Zhang, Shin Yoshikado, Tadashi Aruga

We demonstrate the bistable behavior in a photorefractive self-pumped phase-conjugator (SPPC) theoretically and experimentally. In the method, an incoherent erase beam is used to erase the four-wave mixing (FWM) region of the SPPC, and thus the threshold of the SPPC depends on the intensity ratio of the erase beam to the sum of the coherent beams in the FWM region. Even a white light can be used to control the reflectivity as a switch.

Japanese Journal of Applied Physics•Jan 15, 2002•0 citations
We present a plane-wave analysis of a recently demonstrated self-pumped phase conjugator. This device uses four-wave mixing to produce the phase-conjugate replica of an incident optical wave. All the waves are derived from the single incident wave: there are no externally supplied pumping beams. We consider the case of four-wave mixing in two interaction regions coupled by simple reflection. We calculate the phase-conjugate reflectivity as a function of coupling strength, taking into account imperfect coupling between the two interaction regions, and show that there is a threshold coupling strength below which the reflectivity is zero and above which the reflectivity is multiple valued. We also compute the coupling strength per unit length for a photorefractive crystal of barium titanate.
Abstract The properties of the phase‐conjugate reflectivity are analyzed anew for the self‐pumped four‐wave mixing in which only the two waves, i.e., the forward pump wave and the probe wave, are incident on the photo‐refractive crystal and the phase‐conjugate wave of the forward pump wave is used as the backward pump wave. First, by means of a model in which a Cat‐type phase conjugator is placed outside the interaction region, the equation for the phase‐conjugate reflectivity of self‐pumped four‐wave mixing using a transmission grating is derived. Next, the numerical calculations have been used for the first time to determine the effects of the coupling strength, the probe ratio as the incident intensity ratio of the forward pump wave to the probe wave, and the reflectivity of the Cat‐type phase conjugator on the entire phase conjugate reflectivity. Since the equation describing the phase‐conjugate reflectivity has multiple solutions, the strict analysis of the equation shows that the phase‐conjugate reflectivity has multiple values. Further, the conditions for high phase‐conjugate reflectivity has been studied.
A passive phase conjugate mirror based on four-wave mixing in an optical ring cavity is described. Unlike previously demonstrated passive phase conjugate mirrors it generates only one of its pumping beams by nonlinear optical interactions, the other being provided by feedback of the probe after transmission through the nonlinear medium. The results of a theory yielding phase conjugate reflectivity and oscillation thresholds are presented together with an experimental demonstration of phase conjugation in barium titanate and strontium barium niobate. The device is self-starting by four-wave mixing, and has an oscillation threshold lower than that of other previously demonstrated passive phase conjugate mirrors with similar ease of alignment. The operation of a device which generates nonconjugate oscillation beams is also reported.
When the phase-conjugate replica of an optical beam is generated by traditional four-wave mixing with external pumping beams, the frequency of the phase-conjugate beam is fixed by the frequencies of the three input beams. In self-pumped phase conjugation, there is only one input beam, and the frequency of the output beam is free to roam. In photorefractive materials, this frequency difference between the incident and output beams is typically a few hertz. We present a method for controlling this frequency shift in the self-pumped phase-conjugate mirror that uses a ring configuration1 in photorefractive barium titanate. We show that two-beam coupling of an additional control beam with either of the optical beams already present in the ring cavity can alter the frequency of the phase-conjugate beam. We show that the control beam can alter the nonreciprocal phase shift2 of light propagating around the ring and thereby alter the frequency of the phase-conjugate beam. We also calculate the magnitude and the sign of the expected frequency shift as a function of the intensity, direction, and frequency of this control beam.
The demonstration of optical phase conjugation in photorefractive materials has been accomplished by numerous methods, including i) externally-pumped four-wave mixing,1ii) self-pumped (passive) phase conjugation,24iii) stimulated backscattering,5,6and iv) mutually-pumped phase conjugation.7-10Stimulated backscattering and self-pumped phase conjugators have only a single incident beam. On the other hand, externally-pumped four-wave mixing has two auxiliary pumping beams in addition to the incident probe beam. Different still is the cross-conjugation of the two incident beams in mutually pumped phase conjugators. To use these conjugators in a given application, the compatibility between the processes generating the phase-conjugate wave(s) and the application must be considered. The distinguishing features of the different conjugators translate to advantages or disadvantages for certain applications.
Effects of stimulated photorefractive backscattering (SPB) interactions in both stimulated photorefractive backscattering and four-wave mixing (SPB-FWM) and total internal reflection (TIR) self-pumped phase conjugators have been analyzed theoretically. SPB interactions in the four-wave mixing regions are neglected. Calculations show that the operational threshold and the phase conjugation reflectivity of both phase conjugators are very sensitive to the backscattering two-wave mixing gain coefficient of the crystals. From these results the mechanism transition phenomenon of a self-pumped phase conjugator between SPB-FWM and TIR can be explained if the backscattering gain coefficient of the crystal varies with doping concentration or with wavelength.