American Journal of Physics

Inexpensive laser cooling and trapping experiment for undergraduate laboratories

Carl Wieman, Gwenn Flowers, Sarah L. Gilbert

Published Apr 1, 1995• 113 citations

Abstract

We present detailed instructions for the construction and operation of an inexpensive apparatus for laser cooling and trapping of rubidium atoms. This apparatus allows one to use the light from low power diode lasers to produce a magneto-optical trap in a low pressure vapor cell. We present a design which has reduced the cost to less than $3000 and does not require any machining or glassblowing skills in the construction. It has the additional virtues that the alignment of the trapping laser beams is very easy, and the rubidium pressure is conveniently and rapidly controlled. These features make the trap simple and reliable to operate, and the trapped atoms can be easily seen and studied. With a few milliwatts of laser power we are able to trap 4×107 atoms for 3.5 s in this apparatus. A step-by-step procedure is given for construction of the cell, setup of the optical system, and operation of the trap. A list of parts with prices and vendors is given in the Appendix.

DOI: 10.1119/1.18072

Related papers

A simple laser cooling and trapping apparatus for undergraduate laboratories

Angela S. Mellish, A. C. Wilson

We present detailed instructions for the construction of a pyramidal-style laser cooling and trapping apparatus. This scheme requires only a single beam, rather than the three pairs of orthogonal beams of the standard magneto-optical trap, which greatly simplifies the geometry and substantially reduces the cost. The trap is based largely on low-cost commercially available items and is simple to construct. It is remarkably insensitive to alignment and reliable to operate. Using a single laser beam with an intensity of 1.3 mW/cm2 we cool and trap more than 4 million rubidium atoms.

American Journal of PhysicsAug 13, 200218 citations

Laser cooling of rubidium atoms in a vapor cell

H. Ludvigsen, A. Äijälä, A. Pietiläinen +2 more

We have constructed a simplified setup for the demonstration of laser cooling and trapping of rubidium atoms. An external-cavity diode laser was swept across the F = 3 → F' = 2, 3, 4 resonances of the D 2 -line of 85 Rb at 780 nm to resolve the saturated absorption features. Subsequently, the transition F = 3 → F' = 4 was used to cool rubidium atoms in a roomtemperature vapor cell. A cold cloud of trapped atoms with a diameter of approximately 1 mm was produced. The lifetime of the trap was measured to be 1 second.

Physica ScriptaApr 1, 19947 citations

Design study of a Magneto-Optical Trap for laser cooling of rubidium atoms.

E. Gustafsson

In this Master's thesis a Pyramidal Magneto-Optical Trap for rubidium has been designed.The trap is intended to be used in Atomic Physics courses for demonstration and laboratory exercises.The theory for cooling and trapping 85 Rb and 87 Rb is developed.A detailed design of a low-cost and robust MOT is presented.Two frequency locked laser systems have been built.Most of the components necessary to build the MOT have been identified, borrowed or purchased.The mechanical support to hold a pyramidal mirror has also been realized.The report discusses how to complete the construction of the MOT.

Lund reports on atomic physicsJan 1, 20042 citations

Design and construction of a pyramidal Magneto-Optical Trap for laser cooling of rubidium atoms

Stefan Mangnusson

In this Master's thesis a pyramidal Magneto-Optical trap (MOT) for rubidium has been designed and constructed.This will be used in the Atomic physics cources for undergraduate students at Lund Technical University.The theory for Laser Cooling and Trapping is covered.A detailed instruction of how to design and build a low-cost MOT is presented.All necessary components are now in the picosecond laboratory of Lund High Power Laser Facility.This report is a continuation of another Master's thesis, Lund Reports on Atomic Physics (LRAP) 325. 1 8. Chu, C. Cohen-Tannoudji and W.D. Phillips [22].

Lund reports on atomic physicsJan 1, 20051 citation

Laser Cooling of Neutral Atoms

Strick, Jeffrey E

The theory of cooling neutral atoms to microkelvin temperatures using a magneto optical trap will be presented. The system that is discussed uses a stabilized grating tuned diode laser that is controlled using feedback from a saturation absorption spectrophotometer to produce narrow band continuously tunable IR light for trapping rubidium atoms. A description of the design and construction of each of the components used to create the magneto optical trap will also be discussed. In the final section a description of an exceptionally accurate atomic clock that is used to measure the natural resonance frequency of laser cooled cesium atoms is also presented.

Jan 1, 20020 citations

Laboratory Apparatus Generates Dual-Species Cold Atomic Beam

Robert J. Thompson, William M. Klipstein, James M. Kohel +6 more

A laser cooling apparatus that generates a cold beam of rubidium and cesium atoms at low pressure has been constructed as one of several intermediate products of a continuing program of research on laser cooling and atomic physics. Laser-cooled atomic beams, which can have temperatures as low as a microkelvin, have been used in diverse applications that include measurements of fundamental constants, atomic clocks that realize the international standard unit of time, atom-wave interferometers, and experiments on Bose-Einstein condensation. The present apparatus is a prototype of one being evaluated for use in a proposed microgravitational experiment called the Quantum Interferometric Test of Equivalence (QuITE). In this experiment, interferometric measurements of cesium and rubidium atoms in free fall would be part of a test of Einstein s equivalence principle. The present apparatus and its anticipated successors may also be useful in other experiments, in both microgravity and normal Earth gravity, in which there are requirements for dual-species atomic beams, low temperatures, and low pressures. The apparatus includes a pyramidal magneto-optical trap in which the illumination is provided by multiple lasers tuned to frequencies characteristic of the two atomic species. The inlet to the apparatus is located in a vacuum chamber that contains rubidium and cesium atoms at a low pressure; the beam leaving through the outlet of the apparatus is used to transfer the atoms to a higher-vacuum (lower-pressure) chamber in which measurements are performed. The pyramidal magneto-optical trap is designed so that the laser cooling forces in one direction are unbalanced, resulting in a continuous cold beam of atoms that leak out of the trap (see figure). The radiant intensity (number of atoms per unit time per unit solid angle) of the apparatus is the greatest of any other source of the same type reported to date. In addition, this is the first such apparatus capable of producing a slow, collimated beam that contains two atomic species at the same time.

Jul 1, 20040 citations