Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Journal of the Optical Society of America B

Generation of an intense cold-atom beam from a pyramidal magneto-optical trap: experiment and simulation

James M. Kohel, Jaime Ramirez-Serrano, Robert J. Thompson, Lute Maleki, J. L. Bliss, Kenneth G. Libbrecht

Published Jun 1, 2003• 46 citations
Publisher

Abstract

An intense cold-atom beam source based on a modified pyramidal magneto-optical trap has been developed and characterized. We have produced a slow beam of cold cesium atoms with a continuous flux of 2.2× 109 atoms/s at a mean velocity of 15 m/s and with a divergence of 15 mrad. The corresponding radiant intensity is 1.2×1013 atom s-1 sr-1. We have characterized the performance of our beam source over a range of operating conditions, and the measured values for atom flux, mean velocity, and divergence are in good agreement with results from detailed Monte Carlo numerical simulations.

DOI
10.1364/josab.20.001161

Related papers

Realization of an intense cold Rb atomic beam based on a two-dimensional magneto-optical trap: Experiments and comparison with simulations

Saptarishi Chaudhuri, Sanjukta Roy, C. S. Unnikrishnan

We discuss the implementation and characterization of the source of a slow, intense, and collimated beam of rubidium atoms. The cold atomic beam is produced by two-dimensional magneto-optical trapping in directions transverse to the atomic beam axis and unbalanced Doppler cooling in the axial direction. The vacuum design allows use of relatively low laser power and a considerably simplified assembly. The atomic beam has a high flux of about $2\ifmmode\times\else\texttimes\fi{}{10}^{10}\phantom{\rule{0.3em}{0ex}}\mathrm{atoms}∕\mathrm{s}$ at a total cooling laser power of $55\phantom{\rule{0.3em}{0ex}}\mathrm{mW}$. It has a narrow longitudinal velocity distribution with mean velocity $15\phantom{\rule{0.3em}{0ex}}\mathrm{m}∕\mathrm{s}$ with full width at half maximum $3.5\phantom{\rule{0.3em}{0ex}}\mathrm{m}∕\mathrm{s}$ and has a low divergence of $26\phantom{\rule{0.3em}{0ex}}\mathrm{mrad}$. The high flux enables ultrafast loading of about ${10}^{10}$ atoms into a three-dimensional (3D) magneto-optical trap within 500 ms. The variation of the atomic beam flux was studied as a function of the rubidium vapor pressure, cooling laser power, transverse cooling laser beam length, detuning of the cooling laser, and relative intensities of the cooling beams along the atomic beam axis. We also discuss a detailed comparison of our measurements of the cold atomic beam with a 3D numerical simulation.

Physical Review A•Aug 18, 2006•63 citations

A compact, high-flux source of cold atoms

Sean Ravenhall

The ongoing drive to transfer quantum technologies from research laboratories to practical, portable devices requires the development of multiple key enabling technologies. The field of cold atoms, which includes high-precision metrology and quantum simulation, has various real-world applications including time-keeping and navigation. A crucial component in these systems is a cold-atom source that generates a flux of low-velocity atoms suitable for subsequent capture. A large flux enables fast repetition rates, high duty cycles, long measurement times, and resistance to long-term performance degradation with a good signal-to-noise ratio, all of which are essential to produce cold-atom devices and technologies that are capable of out-performing the classical alternatives. This thesis presents the design, fabrication and characterisation of a novel cold-atom source using a compact pyramidal magneto-optical trap (MOT) with a unique adjustable-aperture mechanism. This allowed an investigation of the dependence of the flux characteristics on the aperture size, a parameter space that has not previously been explored. The measurements showed a strong dependence of the flux on the aperture size, with a negligible flux below 0.4mm, then an approximately linear increase up to 1.0mm, at which point the relationship showed possible signs of saturation. Using 87Rb, a flux of 1.18×1010 atoms/s was produced using a 1.27mm aperture, for which the mean velocity of the atoms was 21.6(3) m/s with a FWHM of 11.2(2) m/s, and the FWHM divergence of the beam was 86(2) mrad. This is the highest recorded flux from a pyramid or 2D+-MOT source, and amongst the highest reported fluxes from any MOT sources, and avenues for improvement still remain. This work fulfils the aim of demonstrating a compact and robust cold-atom source generating a high flux of laser-cooled atoms for real-world quantum technology applications.

•Jan 1, 2018•1 citation

High-flux, adjustable, compact cold-atom source

Sean Ravenhall, Benjamin Yuen, Christopher J. Foot

Magneto-optical traps (MOTs) are widely used for laser cooling of atoms. We have developed a high-flux compact cold-atom source based on a pyramid MOT with a unique adjustable aperture that is highly suitable for portable quantum technology devices, including space-based experiments. The adjustability enabled an investigation into the previously unexplored impact of aperture size on the atomic flux, and optimisation of the aperture size allowed us to demonstrate a higher flux than any reported cold-atom sources that use a pyramid, LVIS, 3D-MOT or grating MOT. We achieved 2.1(1) × 1010 atoms/s of 87Rb with a mean velocity of 32(1) m/s, FWHM of 27.6(9) m/s and divergence of 59(4) mrad. Halving the total optical power to 195 mW caused only a 20% reduction of the flux, and a 30% decrease in mean velocity. Methods to further decrease the velocity as required have been identified. The low power consumption and small size make this design suitable for a wide range of cold-atom technologies.

arXiv:2102.00251•Optics Express•May 17, 2021•20 citations

Low-Velocity Intense Source of Atoms from a Magneto-optical Trap

Zheng‐Tian Lu, Kristan L. Corwin, Michael J. Renn +3 more

We have produced and characterized an intense, slow, and highly collimated atomic beam extracted from a standard vapor cell magneto-optical trap (MOT). The technique used is dramatically simpler than previous methods for producing very cold atomic beams. We have created a 0.6 mm diameter rubidium atomic beam with a continuous flux of $5\ifmmode\times\else\texttimes\fi{}{10}^{9}/\mathrm{s}$ and a pulsed flux 10 times greater. Its longitudinal velocity distribution is centered at 14 m/s with a FWHM of 2.7 m/s. Through an efficient recycling process, 70% of the atoms trapped in the MOT are loaded into the atomic beam.

Physical Review Letters•Oct 14, 1996•269 citations

Two-dimensional magneto-optical trap as a source of slow atoms

Kai Dieckmann, R. J. C. Spreeuw, Matthias Weidemüller +1 more

We experimentally study the use of two-dimensional magneto-optical trapping (2D-MOT) for the generation of slow beams of cold atoms out of a vapor cell. A particularly high flux of $9\ifmmode\times\else\texttimes\fi{}{10}^{9}$ rubidium atoms/s at a mean velocity of 8 m/s is obtained using a combination of magneto-optical trapping in two dimensions and Doppler cooling in the third dimension $({2\mathrm{D}}^{+}\ensuremath{-}\mathrm{MOT}).$ The resulting width of the velocity distribution is 3.3 m/s [full width at half maximum (FWHM)] with a beam divergence of 43 mrad (FWHM). We investigate the total flux as a function of vapor cell pressure and determine the velocity distribution of our slow atom sources. For comparison, we also realized a low-velocity intense source (LVIS), first reported by Lu et al. [Phys. Rev. Lett. 77, 3331 (1996)]. We find that the ${2\mathrm{D}}^{+}\ensuremath{-}\mathrm{MOT}$ yields a significantly higher flux than the LVIS, even when used with an order of magnitude less laser power.

Physical Review A•Nov 1, 1998•306 citations

High-flux source of laser-cooled rubidium atoms for quantum technology applications

Christopher J. Foot, Sean Ravenhall

We have used a pyramid magneto-optical trap (MOT) to create a compact source of cold rubidium atoms. The four dielectric-coated metal mirrors in vacuum are arranged in the form of a pyramid that creates the light field for a MOT from a single ingoing laser beam. The atoms are pushed out through a hole (aperture) in the apex of the pyramid, in a direction determined by the laser light, to give a flux of Rb-87 atoms greater than 2 × 10^10 per second with a mean velocity of 33 m/s (FWHM of 28 m/s) and a divergence of 58 mrad. The pyramid MOT has a unique mechanism for adjusting aperture size and it is highly suitable for portable quantum technology devices.

•Oct 5, 2020•0 citations
An intense cold-atom beam source based on a modified pyramidal magneto-optical trap has been developed and characterized. We have produced a slow beam of cold cesium atoms with a continuous flux of 2.2× 109 atoms/s at a mean velocity of 15 m/s and with a divergence of 15 mrad. The corresponding radiant intensity is 1.2×1013 atom s-1 sr-1. We have characterized the performance of our beam source over a range of operating conditions, and the measured values for atom flux, mean velocity, and divergence are in good agreement with results from detailed Monte Carlo numerical simulations.
We discuss the implementation and characterization of the source of a slow, intense, and collimated beam of rubidium atoms. The cold atomic beam is produced by two-dimensional magneto-optical trapping in directions transverse to the atomic beam axis and unbalanced Doppler cooling in the axial direction. The vacuum design allows use of relatively low laser power and a considerably simplified assembly. The atomic beam has a high flux of about $2\ifmmode\times\else\texttimes\fi{}{10}^{10}\phantom{\rule{0.3em}{0ex}}\mathrm{atoms}∕\mathrm{s}$ at a total cooling laser power of 55mW55\phantom{\rule{0.3em}{0ex}}\mathrm{mW}55mW. It has a narrow longitudinal velocity distribution with mean velocity 15m∕s15\phantom{\rule{0.3em}{0ex}}\mathrm{m}∕\mathrm{s}15m∕s with full width at half maximum 3.5m∕s3.5\phantom{\rule{0.3em}{0ex}}\mathrm{m}∕\mathrm{s}3.5m∕s and has a low divergence of 26mrad26\phantom{\rule{0.3em}{0ex}}\mathrm{mrad}26mrad. The high flux enables ultrafast loading of about 1010{10}^{10}1010 atoms into a three-dimensional (3D) magneto-optical trap within 500 ms. The variation of the atomic beam flux was studied as a function of the rubidium vapor pressure, cooling laser power, transverse cooling laser beam length, detuning of the cooling laser, and relative intensities of the cooling beams along the atomic beam axis. We also discuss a detailed comparison of our measurements of the cold atomic beam with a 3D numerical simulation.
The ongoing drive to transfer quantum technologies from research laboratories to practical, portable devices requires the development of multiple key enabling technologies. The field of cold atoms, which includes high-precision metrology and quantum simulation, has various real-world applications including time-keeping and navigation. A crucial component in these systems is a cold-atom source that generates a flux of low-velocity atoms suitable for subsequent capture. A large flux enables fast repetition rates, high duty cycles, long measurement times, and resistance to long-term performance degradation with a good signal-to-noise ratio, all of which are essential to produce cold-atom devices and technologies that are capable of out-performing the classical alternatives. This thesis presents the design, fabrication and characterisation of a novel cold-atom source using a compact pyramidal magneto-optical trap (MOT) with a unique adjustable-aperture mechanism. This allowed an investigation of the dependence of the flux characteristics on the aperture size, a parameter space that has not previously been explored. The measurements showed a strong dependence of the flux on the aperture size, with a negligible flux below 0.4mm, then an approximately linear increase up to 1.0mm, at which point the relationship showed possible signs of saturation. Using 87Rb, a flux of 1.18×1010 atoms/s was produced using a 1.27mm aperture, for which the mean velocity of the atoms was 21.6(3) m/s with a FWHM of 11.2(2) m/s, and the FWHM divergence of the beam was 86(2) mrad. This is the highest recorded flux from a pyramid or 2D+-MOT source, and amongst the highest reported fluxes from any MOT sources, and avenues for improvement still remain. This work fulfils the aim of demonstrating a compact and robust cold-atom source generating a high flux of laser-cooled atoms for real-world quantum technology applications.
Magneto-optical traps (MOTs) are widely used for laser cooling of atoms. We have developed a high-flux compact cold-atom source based on a pyramid MOT with a unique adjustable aperture that is highly suitable for portable quantum technology devices, including space-based experiments. The adjustability enabled an investigation into the previously unexplored impact of aperture size on the atomic flux, and optimisation of the aperture size allowed us to demonstrate a higher flux than any reported cold-atom sources that use a pyramid, LVIS, 3D-MOT or grating MOT. We achieved 2.1(1) × 1010 atoms/s of 87Rb with a mean velocity of 32(1) m/s, FWHM of 27.6(9) m/s and divergence of 59(4) mrad. Halving the total optical power to 195 mW caused only a 20% reduction of the flux, and a 30% decrease in mean velocity. Methods to further decrease the velocity as required have been identified. The low power consumption and small size make this design suitable for a wide range of cold-atom technologies.
We have produced and characterized an intense, slow, and highly collimated atomic beam extracted from a standard vapor cell magneto-optical trap (MOT). The technique used is dramatically simpler than previous methods for producing very cold atomic beams. We have created a 0.6 mm diameter rubidium atomic beam with a continuous flux of $5\ifmmode\times\else\texttimes\fi{}{10}^{9}/\mathrm{s}$ and a pulsed flux 10 times greater. Its longitudinal velocity distribution is centered at 14 m/s with a FWHM of 2.7 m/s. Through an efficient recycling process, 70% of the atoms trapped in the MOT are loaded into the atomic beam.
We experimentally study the use of two-dimensional magneto-optical trapping (2D-MOT) for the generation of slow beams of cold atoms out of a vapor cell. A particularly high flux of $9\ifmmode\times\else\texttimes\fi{}{10}^{9}$ rubidium atoms/s at a mean velocity of 8 m/s is obtained using a combination of magneto-optical trapping in two dimensions and Doppler cooling in the third dimension $({2\mathrm{D}}^{+}\ensuremath{-}\mathrm{MOT}).$ The resulting width of the velocity distribution is 3.3 m/s [full width at half maximum (FWHM)] with a beam divergence of 43 mrad (FWHM). We investigate the total flux as a function of vapor cell pressure and determine the velocity distribution of our slow atom sources. For comparison, we also realized a low-velocity intense source (LVIS), first reported by Lu et al. [Phys. Rev. Lett. 77, 3331 (1996)]. We find that the ${2\mathrm{D}}^{+}\ensuremath{-}\mathrm{MOT}$ yields a significantly higher flux than the LVIS, even when used with an order of magnitude less laser power.
We have used a pyramid magneto-optical trap (MOT) to create a compact source of cold rubidium atoms. The four dielectric-coated metal mirrors in vacuum are arranged in the form of a pyramid that creates the light field for a MOT from a single ingoing laser beam. The atoms are pushed out through a hole (aperture) in the apex of the pyramid, in a direction determined by the laser light, to give a flux of Rb-87 atoms greater than 2 × 10^10 per second with a mean velocity of 33 m/s (FWHM of 28 m/s) and a divergence of 58 mrad. The pyramid MOT has a unique mechanism for adjusting aperture size and it is highly suitable for portable quantum technology devices.