Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Cavity-enhanced superconducting single-photon detectors on GaAs substrate

S. Jahanmirinejad, Alessandro Gaggero, David Bitauld, Francesco Marsili, Dondu Sahin, F. Mattioli, Roberto Leoni, G. J. Hamhuis, Richard Nötzel, Rosendo Sanjinés, Andrea Fiore

Published Jan 1, 2010• 1 citation
OpenAlex

Abstract

Nanowire superconducting single photon detectors (SSPDs) are unique detectors for\nmany applications in quantum information and communications technology, owing to\ntheir ultrafast photoresponse, low dark count rate and low timing jitter. However, they\nhave limited detection efficiency due to small optical absorption in ultrathin wires. A\npromising approach to increase the photon absorption in SSPDs, is integrating them\nwith advanced optical structures. We demonstrate the successful integration of SSPDs\nwith optical microcavities based on GaAs/AlAs Bragg mirrors. Characterization of\nthese devices reveals clear cavity enhancement of the detection efficiency, resulting in a\npeak value of18% at 2=l300nm and T=4.2K

Related papers

Nanowire superconducting single-photon detectors integrated with optical microcavities based on GaAs substrates

S. Jahanmiri Nejad, Alessandro Gaggero, Francesco Marsili +8 more

In this work, the authors report on the successful integration of superconducting single photon detector (SSPD) with optical cavity based on GaAs/AlAs distributed Bragg reflector (DBR) to enhance their detection efficiency. The cavity consists of a Bragg reflector on a GaAs substrate as the bottom mirror and a weak epitaxial GaAs/air interface acting as the top mirror. The DBR is grown by molecular beam epitaxy and is designed to be resonant at 1309 nm at 4K.

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)•May 1, 2011•1 citation

Cavity-Enhanced Nanowire Superconducting Single Photon Detectors on GaAs

Alessandro Gaggero, S. Jahanmiri Nejad, Francesco Marsili +8 more

We report on efficient nanowire NbN superconducting single photon detectors (SSPDs), integrated with an optical cavity based GaAs/AlAs distributed Bragg reflectors, showing a detection efficiency of 18.3% at 4.2K at 1.3 μm wavelength.

•Jan 1, 2011•0 citations

Nanowire superconducting single-photon detectors on GaAs for integrated quantum photonic applications

Alessandro Gaggero, S. Jahanmiri Nejad, Francesco Marsili +8 more

We demonstrate efficient nanowire superconducting single photon detectors (SSPDs) based on NbN thin films grown on GaAs. NbN films ranging from 3 to 5 nm in thickness have been deposited by dc magnetron sputtering on GaAs substrates at 350 °C. These films show superconducting properties comparable to similar films grown on sapphire and MgO. In order to demonstrate the potential for monolithic integration, SSPDs were fabricated and measured on GaAs/AlAs Bragg mirrors, showing a clear cavity enhancement, with a peak quantum efficiency of 18.3% at λ=1300 nm and T=4.2 K.

Applied Physics Letters•Oct 11, 2010•75 citations

Superconducting single photon detectors for quantum information processing

Robert A. Kirkwood

Single photon detectors are a vital part of many emerging technologies which harness the quantum properties of light to benefit the fields of communication, computation and sensing. Superconducting nanowire single photon detectors (SNSPDs) offer high detection efficiency, low dark count rates, low timing jitter, and infrared sensitivity that are required by the most demanding single photon counting applications. This thesis presents SNSPDs fabricated and tested at the University of Glasgow that are integrated with optical structures which enable enhanced detection efficiency and integration with waveguide circuit technology. The monolithic integration of waveguide circuit components presents a route towards realisation of an optical quantum information processor that has the stability and scalability to perform the demanding tasks of quantum computation. A novel process is introduced for incorporating superconducting detectors with single mode gallium arsenide waveguides and quantum dot single photon sources. Together these elements would enable the generation of quantum states of light which could be manipulated and detected on a single chip. Detectors are patterned in NbTiN thin superconducting films on to suspended nanobeam waveguides with better than 50 nm alignment accuracy. Low temperature electrical and optical testing confirms the detectors’ single photon sensitivity under direct illumination as well as to waveguide coupled light. Measured detectors were found to have internal registering efficiencies of 6.8 ± 2.4%. Enhancing absorption of photons into thin superconducting films is vital to the creation of high efficiency superconducting single photon detectors. Fabricating an SNSPD on a dielectric mirror creates a partial cavity that can be tailored to enhance detection of light at specific wavelengths. Devices have been fabricated and tested in this thesis with enhanced detection efficiency at infrared and visible wavelengths for quantum cryptography, remote sensing and life science applications. Detectors fabricated in NbTiN on GaAs/AlGaAs Bragg mirrors exhibited a system detection efficiency of 1.5% at 1500 nm wavelength for the best device measured. SNSPDs were also fabricated in NbN on aperiodic dielectric mirrors with a range of different bandwidths. A peak system detection efficiency of 82.7% at 808 nm wavelength was recorded.

•Jan 1, 2017•1 citation

Advanced Superconducting Nanowire Single Photon Detectors for Photonic Quantum Technologies

Jean‐Michel Gérard, Anna Mukhtarova, Luca Redaelli +3 more

In the field of quantum technologies, the superconducting nanowire single photon detector(SNSPD) is nowadays well recognized as a key enabling device. SNSPDs combine high detectionefficiency in the visible and near IR spectral ranges, timing jitter as low as 10 ps, low dark count rate(<100 s−1) and cut-off frequency above 100 MHz. These features make it particularly attractive e.g. forfundamental quantum optics experiments and quantum communications.Plug-and-play SNSPDs with fibered optical access, as shown in Figure 1, are based on a meandernanowire defined by patterning an ultrathin (<10 nm) superconducting film. The device is designedso that absorption of a single photon is enough to brake locally the superconducting order, and toinduce a measurable change of the wire’s resistance. Until recently, such devices displayed two mainlimitations: (1) their efficiency did not exceed ~40% due to the limited optical absorption of the thinfilm; and (2) their response was strongly polarization-sensitive, due to the optical anisotropy of thenanowire. I will present two different approaches which enable to get very high (>90% [1]) andpolarization-insensitive [2,3] detection efficiency. We consider designs based on the integration of thenanowire within an optical microcavity (compatible with the plug-and-play configuration) or on topof an optical waveguide (preferred approach for integration in photonic circuits). I will finally discussnovel application prospects of such detectors, with emphasis on photon-number resolution.

•Jan 1, 2018•0 citations

Cavity-Enhanced and Ultrafast Superconducting Single-Photon Detectors

Andreas Vetter, Simone Ferrari, Patrik Rath +8 more

Ultrafast single-photon detectors with high efficiency are of utmost importance for many applications in the context of integrated quantum photonic circuits. Detectors based on superconductor nanowires attached to optical waveguides are particularly appealing for this purpose. However, their speed is limited because the required high absorption efficiency necessitates long nanowires deposited on top of the waveguide. This enhances the kinetic inductance and makes the detectors slow. Here, we solve this problem by aligning the nanowire, contrary to usual choice, perpendicular to the waveguide to realize devices with a length below 1 μm. By integrating the nanowire into a photonic crystal cavity, we recover high absorption efficiency, thus enhancing the detection efficiency by more than an order of magnitude. Our cavity enhanced superconducting nanowire detectors are fully embedded in silicon nanophotonic circuits and efficiently detect single photons at telecom wavelengths. The detectors possess subnanosecond decay (∼120 ps) and recovery times (∼510 ps) and thus show potential for GHz count rates at low timing jitter (∼32 ps). The small absorption volume allows efficient threshold multiphoton detection.

Nano Letters•Oct 19, 2016•107 citations
Nanowire superconducting single photon detectors (SSPDs) are unique detectors for\nmany applications in quantum information and communications technology, owing to\ntheir ultrafast photoresponse, low dark count rate and low timing jitter. However, they\nhave limited detection efficiency due to small optical absorption in ultrathin wires. A\npromising approach to increase the photon absorption in SSPDs, is integrating them\nwith advanced optical structures. We demonstrate the successful integration of SSPDs\nwith optical microcavities based on GaAs/AlAs Bragg mirrors. Characterization of\nthese devices reveals clear cavity enhancement of the detection efficiency, resulting in a\npeak value of18% at 2=l300nm and T=4.2K
We demonstrate efficient nanowire superconducting single photon detectors (SSPDs) based on NbN thin films grown on GaAs. NbN films ranging from 3 to 5 nm in thickness have been deposited by dc magnetron sputtering on GaAs substrates at 350 °C. These films show superconducting properties comparable to similar films grown on sapphire and MgO. In order to demonstrate the potential for monolithic integration, SSPDs were fabricated and measured on GaAs/AlAs Bragg mirrors, showing a clear cavity enhancement, with a peak quantum efficiency of 18.3% at λ=1300 nm and T=4.2 K.
Single photon detectors are a vital part of many emerging technologies which harness the quantum properties of light to benefit the fields of communication, computation and sensing. Superconducting nanowire single photon detectors (SNSPDs) offer high detection efficiency, low dark count rates, low timing jitter, and infrared sensitivity that are required by the most demanding single photon counting applications. This thesis presents SNSPDs fabricated and tested at the University of Glasgow that are integrated with optical structures which enable enhanced detection efficiency and integration with waveguide circuit technology. The monolithic integration of waveguide circuit components presents a route towards realisation of an optical quantum information processor that has the stability and scalability to perform the demanding tasks of quantum computation. A novel process is introduced for incorporating superconducting detectors with single mode gallium arsenide waveguides and quantum dot single photon sources. Together these elements would enable the generation of quantum states of light which could be manipulated and detected on a single chip. Detectors are patterned in NbTiN thin superconducting films on to suspended nanobeam waveguides with better than 50 nm alignment accuracy. Low temperature electrical and optical testing confirms the detectors’ single photon sensitivity under direct illumination as well as to waveguide coupled light. Measured detectors were found to have internal registering efficiencies of 6.8 ± 2.4%. Enhancing absorption of photons into thin superconducting films is vital to the creation of high efficiency superconducting single photon detectors. Fabricating an SNSPD on a dielectric mirror creates a partial cavity that can be tailored to enhance detection of light at specific wavelengths. Devices have been fabricated and tested in this thesis with enhanced detection efficiency at infrared and visible wavelengths for quantum cryptography, remote sensing and life science applications. Detectors fabricated in NbTiN on GaAs/AlGaAs Bragg mirrors exhibited a system detection efficiency of 1.5% at 1500 nm wavelength for the best device measured. SNSPDs were also fabricated in NbN on aperiodic dielectric mirrors with a range of different bandwidths. A peak system detection efficiency of 82.7% at 808 nm wavelength was recorded.
In the field of quantum technologies, the superconducting nanowire single photon detector(SNSPD) is nowadays well recognized as a key enabling device. SNSPDs combine high detectionefficiency in the visible and near IR spectral ranges, timing jitter as low as 10 ps, low dark count rate(<100 s−1) and cut-off frequency above 100 MHz. These features make it particularly attractive e.g. forfundamental quantum optics experiments and quantum communications.Plug-and-play SNSPDs with fibered optical access, as shown in Figure 1, are based on a meandernanowire defined by patterning an ultrathin (<10 nm) superconducting film. The device is designedso that absorption of a single photon is enough to brake locally the superconducting order, and toinduce a measurable change of the wire’s resistance. Until recently, such devices displayed two mainlimitations: (1) their efficiency did not exceed ~40% due to the limited optical absorption of the thinfilm; and (2) their response was strongly polarization-sensitive, due to the optical anisotropy of thenanowire. I will present two different approaches which enable to get very high (>90% [1]) andpolarization-insensitive [2,3] detection efficiency. We consider designs based on the integration of thenanowire within an optical microcavity (compatible with the plug-and-play configuration) or on topof an optical waveguide (preferred approach for integration in photonic circuits). I will finally discussnovel application prospects of such detectors, with emphasis on photon-number resolution.
Ultrafast single-photon detectors with high efficiency are of utmost importance for many applications in the context of integrated quantum photonic circuits. Detectors based on superconductor nanowires attached to optical waveguides are particularly appealing for this purpose. However, their speed is limited because the required high absorption efficiency necessitates long nanowires deposited on top of the waveguide. This enhances the kinetic inductance and makes the detectors slow. Here, we solve this problem by aligning the nanowire, contrary to usual choice, perpendicular to the waveguide to realize devices with a length below 1 μm. By integrating the nanowire into a photonic crystal cavity, we recover high absorption efficiency, thus enhancing the detection efficiency by more than an order of magnitude. Our cavity enhanced superconducting nanowire detectors are fully embedded in silicon nanophotonic circuits and efficiently detect single photons at telecom wavelengths. The detectors possess subnanosecond decay (∼120 ps) and recovery times (∼510 ps) and thus show potential for GHz count rates at low timing jitter (∼32 ps). The small absorption volume allows efficient threshold multiphoton detection.