This paper discusses construction of protograph-based low-density parity-check (LDPC) codes. Emphasis is placed on protograph ensembles whose typical minimum distance grows linearly with block size. Asymptotic performance analysis for both weight enumeration and iterative decoding threshold determination is provided and applied to a series of code constructions. Construction techniques that yield both low thresholds and linear minimum distance growth are introduced by way of example throughout. The paper also examines implementation strategies for high throughput decoding derived from first principles of belief propagation on bipartite graphs.
This paper discusses construction of protograph-based low-density parity-check (LDPC) codes. Emphasis is placed on protograph ensembles whose typical minimum distance grows linearly with block size. Asymptotic performance analysis for both weight enumeration and iterative decoding threshold determination is provided and applied to a series of code constructions. Construction techniques that yield both low thresholds and linear minimum distance growth are introduced by way of example throughout. The paper also examines implementation strategies for high throughput decoding derived from first principles of belief propagation on bipartite graphs.
We propose several LDPC code constructions that simultaneously achieve good threshold and error floor performance. Minimum distance is shown to grow linearly with block size (similar to regular codes of variable degree at least 3) by considering ensemble average weight enumerators. Our constructions are based on projected graph, or protograph, structures that support high-speed decoder implementations. As with irregular ensembles, our constructions are sensitive to the proportion of degree-2 variable nodes. A code with too few such nodes tends to have an iterative decoding threshold that is far from the capacity threshold. A code with too many such nodes tends to not exhibit a minimum distance that grows linearly in block length. In this paper we also show that preceding can be used to lower the threshold of regular LDPC codes. The decoding thresholds of the proposed codes, which have linearly increasing minimum distance in block size, outperform that of regular LDPC codes. Furthermore, a family of low to high rate codes, with thresholds that adhere closely to their respective channel capacity thresholds, is presented. Simulation results for a few example codes show that the proposed codes have low error floors as well as good threshold SNR performance.
A construction method for protograph-based LDPC codes that simultaneously achieve low iterative decoding threshold and linear minimum distance is proposed. We start with a high-rate protograph LDPC code with variable node degrees of at least 3. Lower rate codes are obtained by splitting check nodes and connecting them by degree-2 nodes. This guarantees the linear minimum distance property for the lower-rate codes. Excluding checks connected to degree-1 nodes, we show that the number of degree-2 nodes should be at most one less than the number of checks for the protograph LDPC code to have linear minimum distance. Iterative decoding thresholds are obtained by using the reciprocal channel approximation. Thresholds are lowered by using either precoding or at least one very high-degree node in the base protograph. A family of high- to low-rate codes with minimum distance linearly increasing in block size and with capacity-approaching performance thresholds is presented. FPGA simulation results for a few example codes show that the proposed codes perform as predicted
Families of asymptotically regular LDPC block code ensembles can be formed by terminating (J, K)-regular protograph-based LDPC convolutional codes. By varying the termination length, we obtain a large selection of LDPC block code ensembles with varying code rates and substantially better iterative decoding thresholds than those of (J, K)-regular LDPC block code ensembles, despite the fact that the terminated ensembles are almost regular. Also, by means of an asymptotic weight enumerator analysis, we show that minimum distance grows linearly with block length for all of the ensembles in these families, i.e., the ensembles are asymptotically good. We find that, as the termination length increases, families of ¿asymptotically regular¿ codes with capacity approaching iterative decoding thresholds and declining minimum distance growth rates are obtained, allowing a code designer to trade-off between distance growth rate and threshold. Further, we show that the thresholds and the distance growth rates can be improved by carefully choosing the component protographs used in the code construction.
Low-density parity-check (LDPC) convolutional codes have been shown to be capable of achieving capacity-approaching performance with iterative message-passing decoding. In the first part of this paper, using asymptotic methods to obtain lower bounds on the free distance to constraint length ratio, we show that several ensembles of regular and irregular LDPC convolutional codes derived from protograph-based LDPC block codes have the property that the free distance grows linearly with respect to the constraint length, i.e., the ensembles are asymptotically good. In particular, we show that the free distance to constraint length ratio of the LDPC convolutional code ensembles exceeds the minimum distance to block length ratio of the corresponding LDPC block code ensembles. A large free distance growth rate indicates that codes drawn from the ensemble should perform well at high signal-to-noise ratios under maximum-likelihood decoding. When suboptimal decoding methods are employed, there are many factors that affect the performance of a code. Recently, it has been shown that so-called trapping sets are a significant factor affecting decoding failures of LDPC codes over the additive white Gaussian noise channel with iterative message-passing decoding. In the second part of this paper, we study the trapping sets of the asymptotically good protograph-based LDPC convolutional codes considered earlier. By extending the theory presented in part one and using similar bounding techniques, we show that the size of the smallest non-empty trapping set grows linearly with the constraint length for these ensembles.
Among the recent advances in the area of low-density parity-check (LDPC) codes, protograph-based LDPC codes have the advantages of a simple design procedure and highly structured encoders and decoders. These advantages can also be exploited in the design of protograph-based generalized LDPC (G-LDPC) codes. In this dissertation we provide analytical tools which aid the design of protograph-based LDPC and G-LDPC codes. Specifically, we propose a method for computing the codeword-weight enumerators for finite-length protograph-based G-LDPC code ensembles, and then we consider the asymptotic case when the block-length goes to infinity. These results help the designer identify good ensembles of protograph-based G-LDPC codes in the minimum distance sense (i.e., ensembles which have minimum distances grow linearly with code length). Furthermore, good code ensembles can be characterized by good stopping set, trapping set, or pseudocodeword properties, which assist in the design of G-LDPC codes with low floors. We leverage our method for computing codeword-weight enumerators to compute stopping-set, and pseudocodeword enumerators for the finite-length and the asymptotic ensembles of protograph-based G-LDPC codes. Moreover, we introduce a method for computing trapping set enumerators for finite-length (and asymptotic) protograph-based LDPC code ensembles. Trapping set enumerators for G-LDPC codes represents a more complex problem which we do not consider here. Inspired by our method for computing trapping set enumerators for protograph-based LDPC code ensembles, we developed an algorithm for estimating the trapping set enumerators for a specific LDPC code given its parity-check matrix. We used this algorithm to enumerate trapping sets for several LDPC codes from communication standards. Finally, we study coded-modulation schemes with LDPC codes and pulse position modulation (LDPC-PPM) over the free-space optical channel. We present three different decoding schemes and compare their performances. In addition, we developed a new density evolution tool for use in the design of LDPC codes with good performances over this channel.
Spatially coupled low-density parity-check block codes (SC-LDPC-BCs) are a class of LDPC codes in which certain ensembles achieve capacity under iterative belief propagation decoding. Prior work has considered these codes mostly from a protograph perspective. Following this viewpoint, our work presents new protographs for the design of protograph-based SC-LDPC-BCs. A reciprocal channel approximation (RCA) analysis of the terminated protographs yields the asymptotic performance limits of the ensembles in terms of their iterative decoding thresholds. Our protographs possess the properties of linear minimum distance growth rate and excellent thresholds. We consider the following channels in our work: binary-input additive white Gaussian noise channel (BI-AWGNC), binary erasure channel (BEC), and binary symmetric channel (BSC). Our work focuses on obtaining good designs, with two classes of ensembles being asymptotically regular, for all the three channels while minimizing rate loss.