For the past few years, considerable progress has been made in the fabrication of quantum devices using mesoscopic semiconductor elements. These devices can represent the elemental base for a wide class of high-tech devices from supersensitive detectors of an electromagnetic field to reliable sources of single photons and quantum computers. The article reviews the main experimental results obtained to date with the participation of superconducting quantum devices.
For the past few years, considerable progress has been made in the fabrication of quantum devices using mesoscopic semiconductor elements. These devices can represent the elemental base for a wide class of high-tech devices from supersensitive detectors of an electromagnetic field to reliable sources of single photons and quantum computers. The article reviews the main experimental results obtained to date with the participation of superconducting quantum devices.
Superconducting qubits are fabricated "loss-free" electrical circuits on a chip with size features of tens of nanometers. If cooled to cryogenic temperatures below -273 °C they behave as quantum elements, similar to atoms and molecules. Such a qubit can be manipulated by fast-oscillating magnetic fields and its resulting quantum state can be measured using a proper magnetic detector. These qubits could be the basic elements for a quantum processor. To that order, multiple qubits have to controllably interact, and to that purpose very high quality resonators are fabricated on the same chip. Effectively the interaction results from the phase-coherent exchange of a single photon between qubit and resonator. In this way it is highly analogous to the so-called cavity QED in atomic physics where single atoms couple to a single trapped photon, all inside a cavity resonator. In this thesis, a superconducting flux qubit has been coupled to an LC resonator and coherent exchange of a single photon between qubit and resonator has been achieved. A striking option in these superconducting circuits, not attainable in "common" atomic cavity-QED, is that the interaction between qubit and photon can be made very large, up to the limit that one no longer can talk about the qubit and resonator as such. This limit requires a fully different description and it leads to novel effects, e.g. in the energy spectrum of the qubit-resonator composite. The Bloch-Siegert spectral shift is experimentally demonstrated in this thesis. As a small but critical technical aside a new type of control line filter has been developed, which allows strong suppression of excess electrical noise that forms a threat for qubit coherence. Having two modes of operation, it shorts all low-frequency noise if control is idle while being transparent if control is active, where short or open is determined by the control line signal level itself.
Recent improvements in materials growth and fabrication techniques may finally allow for superconducting semiconductors to realize their potential. Here, we build on a recent proposal to construct superconducting devices such as wires, Josephson junctions, and qubits inside and out-of single crystal silicon or germanium. Using atomistic fabrication techniques such as STM hydrogen lithography, heavily doped superconducting regions within a single crystal could be constructed. We describe the characteristic parameters of basic superconducting elements-a 1-D wire and a tunneling Josephson junction-and estimate the values for boron-doped silicon. The epitaxial, single-crystal nature of these devices, along with the extreme flexibility in device design down to the single-atom scale, may enable lower noise or new types of devices and physics. We consider applications for such supersilicon devices, showing that the state-of-the-art transmon qubit and the sought-after phase-slip qubit can both be realized. The latter qubit leverages the natural high kinetic inductance of these materials. Building on this, we explore how kinetic inductance-based particle detectors (e.g., photon or phonon) could be realized with potential application in astronomy or nanomechanics. We discuss supersemi devices (such as in silicon, germanium, or diamond) which would not require atomistic fabrication approaches and could be realized today.
Quantum information processing using superconducting qubit based on Josephson junction has become one of the most promising candidates for possible realization of a quantum computer. In the heart of the qubit circuits, the superconducting microwave resonator plays a key role in quantum operations and measurements, which enables single-photon level microwave quantum optics. During last decade, the coherence time, or the lifetime of the quantum state, of the superconducting qubit has been dramatically improved. Among several technological innovations, the improvement of superconducting microwave resonator's quality has been the main driving force in getting the qubit performance almost ready for elementary quantum computing architecture. In this paper, I will briefly review very recent progresses of the superconducting microwave resonators especially aimed for quantum device applications during the last decade. The progresses have been driven by ingenious circuit design, material improvement, and new measurement techniques. Even a rather radical idea of three-dimensional large resonators have been successfully implemented in a qubit circuit. All those efforts contributed to our understanding of the qubit decoherence mechanism and as a result to the improvement of qubit performance.
Superconducting quantum bits (qubits) and circuits are the leading candidate for the implementation of solid-state quantum computation. They have also been widely used in a variety of studies of quantum physics, atomic physics, quantum optics, and quantum simulation. In this article, we will present an overview of the basic principles of the superconducting qubits, including the phase, flux, charge, and transmon (Xmon) qubits, and the progress achieved so far concerning the improvements of the device design and quantum coherence property. Experimental studies in various research fields using the superconducting qubits and circuits will be briefly reviewed.
Over the past two decades significant advances have been made in the research of superconducting quantum computing and quantum simulation, in particular of the device design and fabrication that leads to ever-increasing superconducting qubit coherence times and scales. With Google’s announcement of the realization of “quantum supremacy”, superconducting quantum computing has attracted even more attention. Superconducting qubits are macroscopic objects with quantum properties such as quantized energy levels and quantum-state superposition and entanglement. Their quantum states can be precisely manipulated by tuning the magnetic flux, charge, and phase difference of the Josephson junctions with nonlinear inductance through electromagnetic pulse signals, thereby implementing the quantum information processing. They have advantages in many aspects and are expected to become the central part of universal quantum computing. Superconducting qubits and auxiliary devices prepared with niobium or other hard metals like tantalum as bottom layers of large-area components have unique properties and potentials for further development. In this paper the research work in this area is briefly reviewed, starting from the design and working principle of a variety of superconducting qubits, to the detailed procedures of substrate selection and pretreatment, film growth, pattern transfer, etching, and Josephson junction fabrication, and finally the practical superconducting qubit and their auxiliary device fabrications with niobium base layers are also presented. We aim to provide a clear overview for the fabrication process of these superconducting devices as well as an outlook for further device improvement and optimization in order to help establish a perspective for future progress.