© 2026 Aqora Quantum S.A.S.

Terms Privacy Legal Notice

Journal of the Optical Society of America B

Optical switching and high-resolution image transfer in a saturable dye spatial light modulator

Michael J. Damzen, K. J. Baldwin, P. J. Soan

Published Feb 1, 1994• 4 citations

Abstract

We experimentally demonstrate and theoretically analyze practical aspects of using a laser-pumped dye medium as an ultrafast (~10–ps) optically addressed spatial light modulator for application with high-power radiation. Optical modulation of the absorption of a high-power pump beam is produced by a relatively weak (control) beam that is experiencing stimulated emission. The intensity of the control beam required for strong switching of the pump-beam transmission is determined by the gain that is due to stimulated emission at the control-beam frequency. A practical limitation on the gain that is due to excited-state absorption of the pump frequency is described. We demonstrate the application of the dye medium spatial light modulator for high-resolution image transfer and determine the resolution limit of the transfer process. Experimental demonstration is made of optical image processing (edge enhancement). The control beam can also be generated by self-lasing in feedback geometries, and pump transmission can be controlled by the strength of the feedback.

DOI: 10.1364/josab.11.000313

Related papers

Picosecond four-wave mixing in a saturable amplifier polymer dye

T. Yonekawa, Takashige Omatsu, T. Hirose +2 more

Summary form only given. Self-diffraction by four-wave-mixing (FWM) in a nonlinear medium such as liquid crystals and photorefractive materials can contribute to perform energy transfer between the two incident beams. FWM in a saturable gain media has received an intense attention in recent years. Owing to the amplification experienced by all the interaction beams, the high diffraction efficiency is expected. This paper presents the demonstration of transient self-diffraction by pico-second FWM in a saturable amplifier Rhodamine 6G polymer dye. In this work, we extend our previous study of FWM in an inverted polymer dye in the transient regime by using signal and pump lasers with pulse duration of much less than the population relaxation time (several nanoseconds) in the polymer dye. The polymer dye saturable amplifier is shown to be an excellent nonlinear material with high diffraction efficiency and fast response time. It has a potential for applications such as real-time holography, phase conjugation, pulse shaping, and all optical temporal-spatial conversion.

Conference on Lasers and Electro-Optics•Jan 1, 2001•0 citations

Nonsaturable absorption due to stimulated emission of radiation

C. K. Hong, Howard Nathel, Roger W. Minich +2 more

We report an observation of nonsaturable absorption of light. When a laser medium in a small aspect ratio geometry is uniformly and transversely pumped, amplified spontaneous emission (ASE) builds up along the longitudinal axis. The higher ASE intensity at the ends of the cell repopulates the ground state through the stimulated emission process more rapidly than at the center of the cell. Therefore, the absorption of the pump light is enhanced at the ends and the transmitted pump beam shows a nonuniform profile with a peak at the center. When the occupation of the states other than the upper lasing state and the ground state can be ignored, the normalized profile of the transmitted pump beam becomes identical to that of the fluorescence depicting the upper state population distribution. This fact has been confirmed experimentally with a R6G dye cell pumped with various intensities of frequency doubled Nd:YAG laser (λ = 532 nm, 10-ns pulse duration). The percentage of the absorbed pump energy at the ends of the cell remains the same, virtually nonsaturable, whereas at the center it decreases as the pump intensity increases.

Annual Meeting Optical Society of America•Jan 1, 1989•0 citations

All-optical modulation and detection using a gain medium in a pulse shaper

M. Nyman, M. Kaivola, Andriy Shevchenko

We demonstrate all-optical modulation and ultrafast detection using an on-resonance optical gain medium, combined with spectral splitting in a Fourier transform pulse shaper. Multiple spectral channels of one optical beam can be independently modulated in time by another beam, allowing high-rate modulation and multiplexing without requiring ultrafast response from the gain medium. For detection of sub-picosecond signals we demonstrate a method of ultrafast signal detection (temporal imaging with no spatial resolution) that utilizes the spatio-temporal tilt of an optical pulse in a pulse shaper. The proposed methods can find applications in optical information technology and ultrafast imaging.

Optics Express•Nov 4, 2020•0 citations

Soliton-assisted random lasing in liquid crystals

Sreekanth Perumbilavil, Armando Piccardi, Oleksandr Buchnev +3 more

We demonstrate random lasing control exploiting optical gain and light self-localization in a reorientational medium. A spatial soliton in dye-doped nematic liquid crystals modulates stimulated emission of visible light, yielding random lasing with enhanced features.

Photonics and Fiber Technology Congress (ACOFT, BGPP, NP)•Jan 1, 2016•1 citation

Optical phase conjugation in a degenerate resonator with a saturable absorber and a gain medium

D A Nikolaev, Vladimir I. Odintsov

A theory is derived for the absorption (or amplification) of a weak wave in a dye solution saturated by an intense laser wave. Experiments show that a saturable dye can be used as a nonlinear medium for optical phase conjugation of a pump laser beam in a degenerate resonator.

Quantum Electronics•Nov 30, 1993•0 citations

Phase-conjugation property of one-photon pumped backward stimulated emission from a lasing medium

Guang S. He, Paras N. Prasad

Optical phase-conjugation properties of the backward stimulated radiation from a one-photon pumped lasing medium have been studied. The gain medium is a dye solution (pyrromethene 597 in ethanol) or the same dye doped poly(methyl methacrylate) (PMMA) rod pumped with /spl sim/7-ns and 532-nm laser pulses. A highly directional and phase-conjugate backward stimulated emission at /spl sim/573 nm wavelength could be obtained with a conversion efficiency of /spl sim/42% by using a 1-cm-long dye solution sample at the concentration level of d/sub 0/=0.000 15 mol/L. The spectral, temporal, output/input, and phase-conjugation properties of this backward stimulated emission are presented in detail. The induced aberration influence, which is much larger than the divergence angle of the input pump beam, can be basically removed by the backward stimulated emission; however, the fidelity of the near-field detail for the backward stimulated emission is relatively poor. A quasi-collinear holographic interaction model and a mathematical analysis are presented to explain the basic experimental results.

IEEE Journal of Quantum Electronics•Mar 1, 1998•13 citations

We experimentally demonstrate and theoretically analyze practical aspects of using a laser-pumped dye medium as an ultrafast (~10–ps) optically addressed spatial light modulator for application with high-power radiation. Optical modulation of the absorption of a high-power pump beam is produced by a relatively weak (control) beam that is experiencing stimulated emission. The intensity of the control beam required for strong switching of the pump-beam transmission is determined by the gain that is due to stimulated emission at the control-beam frequency. A practical limitation on the gain that is due to excited-state absorption of the pump frequency is described. We demonstrate the application of the dye medium spatial light modulator for high-resolution image transfer and determine the resolution limit of the transfer process. Experimental demonstration is made of optical image processing (edge enhancement). The control beam can also be generated by self-lasing in feedback geometries, and pump transmission can be controlled by the strength of the feedback.

Summary form only given. Self-diffraction by four-wave-mixing (FWM) in a nonlinear medium such as liquid crystals and photorefractive materials can contribute to perform energy transfer between the two incident beams. FWM in a saturable gain media has received an intense attention in recent years. Owing to the amplification experienced by all the interaction beams, the high diffraction efficiency is expected. This paper presents the demonstration of transient self-diffraction by pico-second FWM in a saturable amplifier Rhodamine 6G polymer dye. In this work, we extend our previous study of FWM in an inverted polymer dye in the transient regime by using signal and pump lasers with pulse duration of much less than the population relaxation time (several nanoseconds) in the polymer dye. The polymer dye saturable amplifier is shown to be an excellent nonlinear material with high diffraction efficiency and fast response time. It has a potential for applications such as real-time holography, phase conjugation, pulse shaping, and all optical temporal-spatial conversion.

We report an observation of nonsaturable absorption of light. When a laser medium in a small aspect ratio geometry is uniformly and transversely pumped, amplified spontaneous emission (ASE) builds up along the longitudinal axis. The higher ASE intensity at the ends of the cell repopulates the ground state through the stimulated emission process more rapidly than at the center of the cell. Therefore, the absorption of the pump light is enhanced at the ends and the transmitted pump beam shows a nonuniform profile with a peak at the center. When the occupation of the states other than the upper lasing state and the ground state can be ignored, the normalized profile of the transmitted pump beam becomes identical to that of the fluorescence depicting the upper state population distribution. This fact has been confirmed experimentally with a R6G dye cell pumped with various intensities of frequency doubled Nd:YAG laser (λ = 532 nm, 10-ns pulse duration). The percentage of the absorbed pump energy at the ends of the cell remains the same, virtually nonsaturable, whereas at the center it decreases as the pump intensity increases.

We demonstrate all-optical modulation and ultrafast detection using an on-resonance optical gain medium, combined with spectral splitting in a Fourier transform pulse shaper. Multiple spectral channels of one optical beam can be independently modulated in time by another beam, allowing high-rate modulation and multiplexing without requiring ultrafast response from the gain medium. For detection of sub-picosecond signals we demonstrate a method of ultrafast signal detection (temporal imaging with no spatial resolution) that utilizes the spatio-temporal tilt of an optical pulse in a pulse shaper. The proposed methods can find applications in optical information technology and ultrafast imaging.

Optical phase-conjugation properties of the backward stimulated radiation from a one-photon pumped lasing medium have been studied. The gain medium is a dye solution (pyrromethene 597 in ethanol) or the same dye doped poly(methyl methacrylate) (PMMA) rod pumped with /spl sim/7-ns and 532-nm laser pulses. A highly directional and phase-conjugate backward stimulated emission at /spl sim/573 nm wavelength could be obtained with a conversion efficiency of /spl sim/42% by using a 1-cm-long dye solution sample at the concentration level of d/sub 0/=0.000 15 mol/L. The spectral, temporal, output/input, and phase-conjugation properties of this backward stimulated emission are presented in detail. The induced aberration influence, which is much larger than the divergence angle of the input pump beam, can be basically removed by the backward stimulated emission; however, the fidelity of the near-field detail for the backward stimulated emission is relatively poor. A quasi-collinear holographic interaction model and a mathematical analysis are presented to explain the basic experimental results.