Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Journal of Selected Topics in Quantum Electronics

Single-Photon Detection System for Quantum Optics Applications

Alexander A. Korneev, Yu. B. Vachtomin, Olga V. Minaeva, Alexander V. Divochiy, Смирнов Константин Владимирович, Oleg Okunev, Gregory N Gol'tsman, C. Zinoni, Nicolas Chauvin, Laurent P. Balet, Francesco Marsili, David Bitauld, Blandine Alloing, Lianhe H. Li, Andrea Fiore, L. Lunghi, Annamaria Gerardino, M. Halder, Corentin Jorel, Hugo Zbinden

Published Jan 1, 2007• 48 citations
Publisher

Abstract

We describe the design and characterization of a fiber-coupled double-channel single-photon detection system based on superconducting single-photon detectors (SSPD), and its application for quantum optics experiments on semiconductor nanostructures. When operated at 2-K temperature, the system shows 10% quantum efficiency at 1.3-¿m wavelength with dark count rate below 10 counts per second and timing resolution <100 ps. The short recovery time and absence of afterpulsing leads to counting frequencies as high as 40 MHz. Moreover, the low dark count rate allows operation in continuous mode (without gating). These characteristics are very attractive-as compared to InGaAs avalanche photodiodes-for quantum optics experiments at telecommunication wavelengths. We demonstrate the use of the system in time-correlated fluorescence spectroscopy of quantum wells and in the measurement of the intensity correlation function of light emitted by semiconductor quantum dots at 1300 nm.

DOI
10.1109/jstqe.2007.903856

Related papers

Fiber-coupled NbN superconducting single-photon detectors for quantum correlation measurements

Wojciech Słysz, M. Węgrzecki, Jan Bar +20 more

We have fabricated fiber-coupled superconducting single-photon detectors (SSPDs), designed for quantum-correlationtype experiments. The SSPDs are nanostructured (~100-nm wide and 4-nm thick) NbN superconducting meandering stripes, operated in the 2 to 4.2 K temperature range, and known for ultrafast and efficient detection of visible to nearinfrared photons with almost negligible dark counts. Our latest devices are pigtailed structures with coupling between the SSPD structure and a single-mode optical fiber achieved using a micromechanical photoresist ring placed directly over the meander. The above arrangement withstands repetitive thermal cycling between liquid helium and room temperature, and we can reach the coupling efficiency of up to ~33%. The system quantum efficiency, measured as the ratio of the photons counted by SSPD to the total number of photons coupled into the fiber, in our early devices was found to be around 0.3 % and 1% for 1.55 &mgr;m and 0.9 &mgr;m photon wavelengths, respectively. The photon counting rate exceeded 250 MHz. The receiver with two SSPDs, each individually biased, was placed inside a transport, 60-liter liquid helium Dewar, assuring uninterrupted operation for over 2 months. Since the receiver's optical and electrical connections are at room temperature, the set-up is suitable for any applications, where single-photon counting capability and fast count rates are desired. In our case, it was implemented for photon correlation experiments. The receiver response time, measured as a second-order photon cross-correlation function, was found to be below 400 ps, with timing jitter of less than 40 ps.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•May 4, 2007•13 citations

Single photon source characterization with a superconducting single photon detector

Robert H. Hadfield, Martin J. Stevens, Steven S. Gruber +4 more

Superconducting single photon detectors (SSPD) based on nanopatterned niobium nitride wires offer single photon counting at fast rates, low jitter, and low dark counts, from visible wavelengths well into the infrared. We demonstrate the first use of an SSPD, packaged in a commercial cryocooler, for single photon source characterization. The source is an optically pumped, microcavity-coupled InGaAs quantum dot, emitting single photons at 902 nm. The SSPD replaces the second silicon Avalanche Photodiode (APD) in a Hanbury-Brown Twiss interferometer measurement of the source second-order correlation function, g(2)( ?). The detection efficiency of the superconducting detector system is >2 % (coupling losses included). The SSPD system electronics jitter is 170 ps, versus 550 ps for the APD unit, allowing the source spontaneous emission lifetime to be measured with improved resolution.

arXiv:quant-ph/0511030•Optics Express•Jan 1, 2005•177 citations

Spectroscopy With Nanostructured Superconducting Single Photon Detectors

Elisabeth Reiger, Dong Pan, Wojtek Slysz +10 more

Superconducting single-photon detectors (SSPDs) are nanostructured devices made from ultrathin superconducting films. They are typically operated at liquid helium temperature and exhibit high detection efficiency, in combination with very low dark counts, fast response time, and extremely low timing jitter, within a broad wavelength range from ultraviolet to mid-infrared (up to 6mum). SSPDs are very attractive for applications such as fiber-based telecommunication, where single-photon sensitivity and high photon-counting rates are required. We review the current state-of-the-art in the SSPD research and development, and compare the SSPD performance to the best semiconducting avalanche photodiodes and other superconducting photon detectors. Furthermore, we demonstrate that SSPDs can also be successfully implemented in photon-energy-resolving experiments. Our approach is based on the fact that the size of the hotspot, a nonsuperconducting region generated upon photon absorption, is linearly dependent on the photon energy. We introduce a statistical method, where, by measuring the SSPD system detection efficiency at different bias currents, we are able to resolve the wavelength of the incident photons with a resolution of 50 nm.

IEEE Journal of Selected Topics in Quantum Electronics•Jul 1, 2007•29 citations

Ultrafast superconducting single-photon optical detectors

Roman Sobolewski, J. Zhang, Wojciech Słysz +12 more

We present a new class of single-photon devices for counting of both visible and infrared photons. Our superconducting single-photon detectors (SSPDs) are characterized by the intrinsic quantum efficiency (QE) reaching up to 100%, above 10 GHz counting rate, and negligible dark counts. The detection mechanism is based on the photon-induced hotspot formation and subsequent appearance of a transient resistive barrier across an ultrathin and submicron-wide superconducting stripe. The devices are fabricated from 3.5-nm-thick NbN films and operate at 4.2 K, well below the NbN superconducting transition temperature. Various continuous and pulsed laser sources in the wavelength range from 0.4 μm up to >3 μm were implemented in our experiments, enabling us to determine the detector QE in the photon-counting mode, response time, and jitter. For our best 3.5-nm-thick, 10×10 μm2-area devices, QE was found to reach almost 100% for any wavelength shorter than about 800 nm. For longer-wavelength (infrared) radiation, QE decreased exponentially with the photon wavelength increase. Time-resolved measurements of our SSPDs showed that the system-limited detector response pulse width was below 150 ps. The system jitter was measured to be 35 ps. In terms of the counting rate, jitter, and dark counts, the NbN SSPDs significantly outperform their semiconductor counterparts. Already identifeid and implemented applications of our devices range from noninvasive testing of semiconductor VLSI circuits to free-space quantum communications and quantum cryptography.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Aug 8, 2003•3 citations

Quantum Dot Single Photon Sources Studied with Superconducting Single Photon Detectors

Martin J. Stevens, Robert H. Hadfield, Robert E. Schwall +2 more

We report the observation of photon antibunching from a single, self-assembled InGaAs quantum dot (QD) at temperatures up to 135 K. The second-order intensity correlation,$g^{(2)}$(0), is less than 0.260$\pm$0.024 for temperatures up to 100 K. At 120 K,$g^{(2)}$(0) increases to about 0.471, which is slightly less than the second-order intensity correlation expected from two independent single emitters. In addition, we characterize the performance of a superconducting single photon detector (SSPD) based on a nanopatterned niobium nitride wire that exhibits 68$\pm$3-ps timing jitter and less than 100-Hz dark count rate with a detection efficiency (DE) of up to 2% at 902 nm. This detector is used to measure spontaneous emission lifetimes of semiconductor quantum wells (QWs) emitting light at wavelengths of 935 and 1245 nm. The sensitivity to wavelengths longer than 1$\mu$m and the Gaussian temporal response of this superconducting detector present clear advantages over the conventional detector technologies. We also use this detector to characterize the emission from a single InGaAs QD embedded in a micropillar cavity, measuring a spontaneous emission lifetime of 370 ps and a$g^{(2)}$(0) of 0.24$\pm$0.03.

IEEE Journal of Selected Topics in Quantum Electronics•Nov 1, 2006•13 citations

Single-photon experiments at telecommunication wavelengths using nanowire superconducting detectors

C. Zinoni, Blandine Alloing, Lianhe H. Li +7 more

The authors report fiber-coupled superconducting single-photon detectors with specifications that exceed those of avalanche photodiodes, operating at telecommunication wavelength, in sensitivity, temporal resolution, and repetition frequency. The improved performance is demonstrated by measuring the intensity correlation function g(2)(τ) of single-photon states at 1300nm produced by single semiconductor quantum dots.

arXiv:physics/0610091•Applied Physics Letters•Jul 16, 2007•67 citations
We describe the design and characterization of a fiber-coupled double-channel single-photon detection system based on superconducting single-photon detectors (SSPD), and its application for quantum optics experiments on semiconductor nanostructures. When operated at 2-K temperature, the system shows 10% quantum efficiency at 1.3-¿m wavelength with dark count rate below 10 counts per second and timing resolution <100 ps. The short recovery time and absence of afterpulsing leads to counting frequencies as high as 40 MHz. Moreover, the low dark count rate allows operation in continuous mode (without gating). These characteristics are very attractive-as compared to InGaAs avalanche photodiodes-for quantum optics experiments at telecommunication wavelengths. We demonstrate the use of the system in time-correlated fluorescence spectroscopy of quantum wells and in the measurement of the intensity correlation function of light emitted by semiconductor quantum dots at 1300 nm.
We have fabricated fiber-coupled superconducting single-photon detectors (SSPDs), designed for quantum-correlationtype experiments. The SSPDs are nanostructured (~100-nm wide and 4-nm thick) NbN superconducting meandering stripes, operated in the 2 to 4.2 K temperature range, and known for ultrafast and efficient detection of visible to nearinfrared photons with almost negligible dark counts. Our latest devices are pigtailed structures with coupling between the SSPD structure and a single-mode optical fiber achieved using a micromechanical photoresist ring placed directly over the meander. The above arrangement withstands repetitive thermal cycling between liquid helium and room temperature, and we can reach the coupling efficiency of up to ~33%. The system quantum efficiency, measured as the ratio of the photons counted by SSPD to the total number of photons coupled into the fiber, in our early devices was found to be around 0.3 % and 1% for 1.55 &mgr;m and 0.9 &mgr;m photon wavelengths, respectively. The photon counting rate exceeded 250 MHz. The receiver with two SSPDs, each individually biased, was placed inside a transport, 60-liter liquid helium Dewar, assuring uninterrupted operation for over 2 months. Since the receiver's optical and electrical connections are at room temperature, the set-up is suitable for any applications, where single-photon counting capability and fast count rates are desired. In our case, it was implemented for photon correlation experiments. The receiver response time, measured as a second-order photon cross-correlation function, was found to be below 400 ps, with timing jitter of less than 40 ps.
Superconducting single photon detectors (SSPD) based on nanopatterned niobium nitride wires offer single photon counting at fast rates, low jitter, and low dark counts, from visible wavelengths well into the infrared. We demonstrate the first use of an SSPD, packaged in a commercial cryocooler, for single photon source characterization. The source is an optically pumped, microcavity-coupled InGaAs quantum dot, emitting single photons at 902 nm. The SSPD replaces the second silicon Avalanche Photodiode (APD) in a Hanbury-Brown Twiss interferometer measurement of the source second-order correlation function, g(2)( ?). The detection efficiency of the superconducting detector system is >2 % (coupling losses included). The SSPD system electronics jitter is 170 ps, versus 550 ps for the APD unit, allowing the source spontaneous emission lifetime to be measured with improved resolution.
Superconducting single-photon detectors (SSPDs) are nanostructured devices made from ultrathin superconducting films. They are typically operated at liquid helium temperature and exhibit high detection efficiency, in combination with very low dark counts, fast response time, and extremely low timing jitter, within a broad wavelength range from ultraviolet to mid-infrared (up to 6mum). SSPDs are very attractive for applications such as fiber-based telecommunication, where single-photon sensitivity and high photon-counting rates are required. We review the current state-of-the-art in the SSPD research and development, and compare the SSPD performance to the best semiconducting avalanche photodiodes and other superconducting photon detectors. Furthermore, we demonstrate that SSPDs can also be successfully implemented in photon-energy-resolving experiments. Our approach is based on the fact that the size of the hotspot, a nonsuperconducting region generated upon photon absorption, is linearly dependent on the photon energy. We introduce a statistical method, where, by measuring the SSPD system detection efficiency at different bias currents, we are able to resolve the wavelength of the incident photons with a resolution of 50 nm.
We present a new class of single-photon devices for counting of both visible and infrared photons. Our superconducting single-photon detectors (SSPDs) are characterized by the intrinsic quantum efficiency (QE) reaching up to 100%, above 10 GHz counting rate, and negligible dark counts. The detection mechanism is based on the photon-induced hotspot formation and subsequent appearance of a transient resistive barrier across an ultrathin and submicron-wide superconducting stripe. The devices are fabricated from 3.5-nm-thick NbN films and operate at 4.2 K, well below the NbN superconducting transition temperature. Various continuous and pulsed laser sources in the wavelength range from 0.4 μm up to >3 μm were implemented in our experiments, enabling us to determine the detector QE in the photon-counting mode, response time, and jitter. For our best 3.5-nm-thick, 10×10 μm2-area devices, QE was found to reach almost 100% for any wavelength shorter than about 800 nm. For longer-wavelength (infrared) radiation, QE decreased exponentially with the photon wavelength increase. Time-resolved measurements of our SSPDs showed that the system-limited detector response pulse width was below 150 ps. The system jitter was measured to be 35 ps. In terms of the counting rate, jitter, and dark counts, the NbN SSPDs significantly outperform their semiconductor counterparts. Already identifeid and implemented applications of our devices range from noninvasive testing of semiconductor VLSI circuits to free-space quantum communications and quantum cryptography.
We report the observation of photon antibunching from a single, self-assembled InGaAs quantum dot (QD) at temperatures up to 135 K. The second-order intensity correlation,g(2)g^{(2)}g(2)(0), is less than 0.260$\pm0.024fortemperaturesupto100K.At120K,0.024 for temperatures up to 100 K. At 120 K,0.024fortemperaturesupto100K.At120K,g^{(2)}(0)increasestoabout0.471,whichisslightlylessthanthesecond−orderintensitycorrelationexpectedfromtwoindependentsingleemitters.Inaddition,wecharacterizetheperformanceofasuperconductingsinglephotondetector(SSPD)basedonananopatternedniobiumnitridewirethatexhibits68(0) increases to about 0.471, which is slightly less than the second-order intensity correlation expected from two independent single emitters. In addition, we characterize the performance of a superconducting single photon detector (SSPD) based on a nanopatterned niobium nitride wire that exhibits 68(0)increasestoabout0.471,whichisslightlylessthanthesecond−orderintensitycorrelationexpectedfromtwoindependentsingleemitters.Inaddition,wecharacterizetheperformanceofasuperconductingsinglephotondetector(SSPD)basedonananopatternedniobiumnitridewirethatexhibits68\pm3−pstimingjitterandlessthan100−Hzdarkcountratewithadetectionefficiency(DE)ofupto23-ps timing jitter and less than 100-Hz dark count rate with a detection efficiency (DE) of up to 2% at 902 nm. This detector is used to measure spontaneous emission lifetimes of semiconductor quantum wells (QWs) emitting light at wavelengths of 935 and 1245 nm. The sensitivity to wavelengths longer than 13−pstimingjitterandlessthan100−Hzdarkcountratewithadetectionefficiency(DE)ofupto2\mumandtheGaussiantemporalresponseofthissuperconductingdetectorpresentclearadvantagesovertheconventionaldetectortechnologies.WealsousethisdetectortocharacterizetheemissionfromasingleInGaAsQDembeddedinamicropillarcavity,measuringaspontaneousemissionlifetimeof370psandam and the Gaussian temporal response of this superconducting detector present clear advantages over the conventional detector technologies. We also use this detector to characterize the emission from a single InGaAs QD embedded in a micropillar cavity, measuring a spontaneous emission lifetime of 370 ps and amandtheGaussiantemporalresponseofthissuperconductingdetectorpresentclearadvantagesovertheconventionaldetectortechnologies.WealsousethisdetectortocharacterizetheemissionfromasingleInGaAsQDembeddedinamicropillarcavity,measuringaspontaneousemissionlifetimeof370psandag^{(2)}(0)of0.24(0) of 0.24(0)of0.24\pm$0.03.