Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Applied Physics Letters

Multiphoton detection using visible light photon counter

Jungsang Kim, Shigeki Takeuchi, Y. Yamamoto, Henry H. Hogue

Published Feb 15, 1999• 263 citations
Publisher

Abstract

Visible light photon counters feature noise-free avalanche multiplication and narrow pulse height distribution for single photon detection events. Such a well-defined pulse height distribution for a single photon detection event, combined with the fact that the avalanche multiplication is confined to a small area of the whole detector, opens up the possibility for the simultaneous detection of two photons. In this letter, we investigated this capability using twin photons generated by parametric down conversion, and present a high quantum efficiency (∼47%) detection of two photons with good time resolution (∼2 ns), which can be distinguished from a single-photon incidence with a small bit-error rate (∼0.63%).

DOI
10.1063/1.123404

Related papers

High-efficiency photon-number detection for quantum information processing

Edo Waks A, Kyo Inoue, William D. Oliver +2 more

The visible light photon counter (VLPC) features high quantum efficiency (QE) and low pulse height dispersion. These properties make it ideal for efficient photon-number state detection. The ability to perform efficient photon-number state detection is important in many quantum information processing applications, including recent proposals for performing quantum computation with linear optical elements. In this paper, we investigate the unique capabilities of the VLPC. The efficiency of the detector and cryogenic system is measured at 543 nm wavelengths to be 85%. A picosecond pulsed laser is then used to excite the detector with pulses having average photon numbers ranging from 3-5. The output of the VLPC is used to discriminate photon numbers in a pulse. The error probability for number state discrimination is an increasing function of the number of photons, due to buildup of multiplication noise. This puts an ultimate limit on the ability of the VLPC to do number state detection. For many applications, it is sufficient to discriminate between 1 and more than one detected photon. The VLPC can do this with 99% accuracy.

arXiv:quant-ph/0308054•IEEE Journal of Selected Topics in Quantum Electronics•Nov 1, 2003•121 citations

Photon number generation with the visible light photon counter

Edo Waks A, Eleni Diamanti, Y. Yamamoto

The Visible Light Photon Counter (VLPC) has the capability to discriminate photon number states, in contrast to conventional photon counters which can only detect the presence or absence of photons. We use this capability, along with the process of parametric down-conversion, to generate photon number states. We first investigate single photon generation, using a modified Hanbury-Brown Twiss (HBT) intensity interferometer to verify the single photon nature of the light. We then use a second VLPC to experimentally demonstrate generation of 2,3 and 4 photons with high fidelity. We investigate the effect of the detection efficiency of the VLPC on the generation rate and fidelity of the created states.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Oct 19, 2004•0 citations

Generation of photon number states

Edo Waks A, Eleni Diamanti, Y. Yamamoto

The visible light photon counter (VLPC) has the capability to discriminate photon number states, in contrast to conventional photon counters which can only detect the presence or absence of photons. We use this capability, along with the process of parametric down-conversion, to generate photon number states. We experimentally demonstrate generation of states containing 1, 2, 3 and 4 photons with high fidelity. We then explore the effect the detection efficiency of the VLPC has on the generation rate and fidelity of the created states.

arXiv:quant-ph/0308055•New Journal of Physics•Jan 20, 2006•105 citations

High-efficiency single-photon detectors

Paul G. Kwiat, Aephraim M. Steinberg, R. Y. Chiao +2 more

Using correlated photon pairs produced via spontaneous parametric down-conversion, we have measured the absolute single-photon detection efficiencies and time responses of four detectors: two solid-state photomultipliers (SSPM's) manufactured by Rockwell International Corp., and two custom-modified single-photon counting modules (SSPM's) manufactured by EG, Canada. The highest observed efficiencies were 70.9\ifmmode\pm\else\textpm\fi{}1.9% (with an SSPM, at a wavelength of 632 nm) and 76.4\ifmmode\pm\else\textpm\fi{}2.3% (with an SPCM, at 702 nm). We believe these to be the highest reported single-photon detection efficiencies in the visible spectrum; they are important for quantum cryptography and loophole-free tests of Bell's inequalities, as well as more prosaic applications such as photon correlation spectroscopy and velocimetry. We found that the time profile for coincidences between the SSPM and the SPCM consisted of a main peak with a 3.5-ns full width at half maximum (FWHM) preceded by a smaller peak by 11 ns. A similar time profile between two SPCM's displayed only one peak, with a 300-ps FWHM. Afterpulses were detected in the SPCM's at a level of less than ${10}^{\mathrm{\ensuremath{-}}4}$ of the counting rate, with an exponential decay time constant of 4.5 \ensuremath{\mu}s.

Physical Review A•Aug 1, 1993•109 citations

Noise-free high-efficiency photon-number-resolving detectors

Danna Rosenberg, Adriana E. Lita, Aaron Miller +1 more

High-efficiency optical detectors that can determine the number of photons in a pulse of monochromatic light have applications in a variety of physics studies, including post-selection-based entanglement protocols for linear optics quantum computing and experiments that simultaneously close the detection and communication loopholes of Bell's inequalities. Here we report on our demonstration of fiber-coupled, noise-free, photon-number-resolving transition-edge sensors with 88% efficiency at 1550 nm. The efficiency of these sensors could be made even higher at any wavelength in the visible and near-infrared spectrum without resulting in a higher dark-count rate or degraded photon-number resolution.

arXiv:quant-ph/0506175•Physical Review A•Jun 17, 2005•242 citations

Mid-infrared coincidence measurements on twin photons at room temperature

Mattia Mancinelli, Alessandro Trenti, Sara Piccione +5 more

Quantum measurements using single-photon detectors are opening interesting new perspectives in diverse fields such as remote sensing, quantum cryptography and quantum computing. A particularly demanding class of applications relies on the simultaneous detection of correlated single photons. In the visible and near infrared wavelength ranges suitable single-photon detectors do exist. However, low detector quantum efficiency or excessive noise has hampered their mid-infrared (MIR) counterpart. Fast and highly efficient single-photon detectors are thus highly sought after for MIR applications. Here we pave the way to quantum measurements in the MIR by the demonstration of a room temperature coincidence measurement with non-degenerate twin photons at about 3.1 μm. The experiment is based on the spectral translation of MIR radiation into the visible region, by means of efficient up-converter modules. The up-converted pairs are then detected with low-noise silicon avalanche photodiodes without the need for cryogenic cooling.

Nature Communications•May 15, 2017•88 citations
Visible light photon counters feature noise-free avalanche multiplication and narrow pulse height distribution for single photon detection events. Such a well-defined pulse height distribution for a single photon detection event, combined with the fact that the avalanche multiplication is confined to a small area of the whole detector, opens up the possibility for the simultaneous detection of two photons. In this letter, we investigated this capability using twin photons generated by parametric down conversion, and present a high quantum efficiency (∼47%) detection of two photons with good time resolution (∼2 ns), which can be distinguished from a single-photon incidence with a small bit-error rate (∼0.63%).
The visible light photon counter (VLPC) features high quantum efficiency (QE) and low pulse height dispersion. These properties make it ideal for efficient photon-number state detection. The ability to perform efficient photon-number state detection is important in many quantum information processing applications, including recent proposals for performing quantum computation with linear optical elements. In this paper, we investigate the unique capabilities of the VLPC. The efficiency of the detector and cryogenic system is measured at 543 nm wavelengths to be 85%. A picosecond pulsed laser is then used to excite the detector with pulses having average photon numbers ranging from 3-5. The output of the VLPC is used to discriminate photon numbers in a pulse. The error probability for number state discrimination is an increasing function of the number of photons, due to buildup of multiplication noise. This puts an ultimate limit on the ability of the VLPC to do number state detection. For many applications, it is sufficient to discriminate between 1 and more than one detected photon. The VLPC can do this with 99% accuracy.
The Visible Light Photon Counter (VLPC) has the capability to discriminate photon number states, in contrast to conventional photon counters which can only detect the presence or absence of photons. We use this capability, along with the process of parametric down-conversion, to generate photon number states. We first investigate single photon generation, using a modified Hanbury-Brown Twiss (HBT) intensity interferometer to verify the single photon nature of the light. We then use a second VLPC to experimentally demonstrate generation of 2,3 and 4 photons with high fidelity. We investigate the effect of the detection efficiency of the VLPC on the generation rate and fidelity of the created states.
The visible light photon counter (VLPC) has the capability to discriminate photon number states, in contrast to conventional photon counters which can only detect the presence or absence of photons. We use this capability, along with the process of parametric down-conversion, to generate photon number states. We experimentally demonstrate generation of states containing 1, 2, 3 and 4 photons with high fidelity. We then explore the effect the detection efficiency of the VLPC has on the generation rate and fidelity of the created states.
Using correlated photon pairs produced via spontaneous parametric down-conversion, we have measured the absolute single-photon detection efficiencies and time responses of four detectors: two solid-state photomultipliers (SSPM's) manufactured by Rockwell International Corp., and two custom-modified single-photon counting modules (SSPM's) manufactured by EG, Canada. The highest observed efficiencies were 70.9\ifmmode\pm\else\textpm\fi{}1.9% (with an SSPM, at a wavelength of 632 nm) and 76.4\ifmmode\pm\else\textpm\fi{}2.3% (with an SPCM, at 702 nm). We believe these to be the highest reported single-photon detection efficiencies in the visible spectrum; they are important for quantum cryptography and loophole-free tests of Bell's inequalities, as well as more prosaic applications such as photon correlation spectroscopy and velocimetry. We found that the time profile for coincidences between the SSPM and the SPCM consisted of a main peak with a 3.5-ns full width at half maximum (FWHM) preceded by a smaller peak by 11 ns. A similar time profile between two SPCM's displayed only one peak, with a 300-ps FWHM. Afterpulses were detected in the SPCM's at a level of less than ${10}^{\mathrm{\ensuremath{-}}4}$ of the counting rate, with an exponential decay time constant of 4.5 \ensuremath{\mu}s.
High-efficiency optical detectors that can determine the number of photons in a pulse of monochromatic light have applications in a variety of physics studies, including post-selection-based entanglement protocols for linear optics quantum computing and experiments that simultaneously close the detection and communication loopholes of Bell's inequalities. Here we report on our demonstration of fiber-coupled, noise-free, photon-number-resolving transition-edge sensors with 88% efficiency at 1550 nm. The efficiency of these sensors could be made even higher at any wavelength in the visible and near-infrared spectrum without resulting in a higher dark-count rate or degraded photon-number resolution.
Quantum measurements using single-photon detectors are opening interesting new perspectives in diverse fields such as remote sensing, quantum cryptography and quantum computing. A particularly demanding class of applications relies on the simultaneous detection of correlated single photons. In the visible and near infrared wavelength ranges suitable single-photon detectors do exist. However, low detector quantum efficiency or excessive noise has hampered their mid-infrared (MIR) counterpart. Fast and highly efficient single-photon detectors are thus highly sought after for MIR applications. Here we pave the way to quantum measurements in the MIR by the demonstration of a room temperature coincidence measurement with non-degenerate twin photons at about 3.1 μm. The experiment is based on the spectral translation of MIR radiation into the visible region, by means of efficient up-converter modules. The up-converted pairs are then detected with low-noise silicon avalanche photodiodes without the need for cryogenic cooling.